Download or read book Finite Volume Modelling for Groundwater Flow Simulations written by Dalila Loudyi and published by LAP Lambert Academic Publishing. This book was released on 2015-04-09 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this work, three finite volume discretisations of the two-dimensional diffusion equation, governing groundwater flow and for use with structured quadrilateral meshes, have been developed. The three methods rely on a cell-centred finite volume approach, but show distinct differences in the choice of: gradient approximation, head interpolations and control volume. They have been implemented into MODFLOW to enhance its capability in simulating accurately natural aquifer boundaries. A time implicit formulation has been used in each model. Five test examples have been undertaken to compare the performance of the newly developed methods against MODFLOW predictions and analytical results. The accuracy of the results obtained was found to depend on the spatial and temporal discretisations. One of the three developed methods proved its robustness, with regard to mesh non-orthogonality and skewness, and has been tested with a field case study. A discussion about the performance of the new developed finite volume model has been included and the model has been shown to perform well in comparison with MODFLOW.
Download or read book A 2D Finite Volume Model for Groundwater Flow Simulations written by Dalila Loudyi and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Groundwater Modeling written by Herbert F. Wang and published by Academic Press. This book was released on 1995-07-26 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The dramatic advances in the efficiency of digital computers during the past decade have provided hydrologists with a powerful tool for numerical modeling of groundwater systems. Introduction to Groundwater Modeling presents a broad, comprehensive overview of the fundamental concepts and applications of computerized groundwater modeling. The book covers both finite difference and finite element methods and includes practical sample programs that demonstrate theoretical points described in the text. Each chapter is followed by problems, notes, and references to additional information. This volume will be indispensable to students in introductory groundwater modeling courses as well as to groundwater professionals wishing to gain a complete introduction to this vital subject. Systematic exposition of the basic ideas and results of Hilbert space theory and functional analysis Great variety of applications that are not available in comparable books Different approach to the Lebesgue integral, which makes the theory easier, more intuitive, and more accessible to undergraduate students
Download or read book 2D Finite Volume Model for Groundwater Flow Simulations written by Dalila Loudyi and published by . This book was released on 2005 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Efficient Numerical Methods and Information Processing Techniques for Modeling Hydro and Environmental Systems written by Reinhard Hinkelmann and published by Springer Science & Business Media. This book was released on 2006-08-10 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical simulation models have become indispensable in hydro- and environmental sciences and engineering. This monograph presents a general introduction to numerical simulation in environment water, based on the solution of the equations for groundwater flow and transport processes, for multiphase and multicomponent flow and transport processes in the subsurface as well as for flow and transport processes in surface waters. It displays in detail the state of the art of discretization and stabilization methods (e.g. finite-difference, finite-element, and finite-volume methods), parallel methods, and adaptive methods as well as fast solvers, with particular focus on explaining the interactions of the different methods. The book gives a brief overview of various information-processing techniques and demonstrates the interactions of the numerical methods with the information-processing techniques, in order to achieve efficient numerical simulations for a wide range of applications in environment water.
Download or read book Applied Groundwater Modeling written by Mary P. Anderson and published by Academic Press. This book was released on 2015-08-13 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition is extensively revised throughout with expanded discussion of modeling fundamentals and coverage of advances in model calibration and uncertainty analysis that are revolutionizing the science of groundwater modeling. The text is intended for undergraduate and graduate level courses in applied groundwater modeling and as a comprehensive reference for environmental consultants and scientists/engineers in industry and governmental agencies. Explains how to formulate a conceptual model of a groundwater system and translate it into a numerical model Demonstrates how modeling concepts, including boundary conditions, are implemented in two groundwater flow codes-- MODFLOW (for finite differences) and FEFLOW (for finite elements) Discusses particle tracking methods and codes for flowpath analysis and advective transport of contaminants Summarizes parameter estimation and uncertainty analysis approaches using the code PEST to illustrate how concepts are implemented Discusses modeling ethics and preparation of the modeling report Includes Boxes that amplify and supplement topics covered in the text Each chapter presents lists of common modeling errors and problem sets that illustrate concepts
Download or read book Groundwater Modeling by the Finite Element Method written by J. D. Istok and published by American Geophysical Union. This book was released on 1989 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published by the American Geophysical Union as part of the Water Resources Monograph Series, Volume 13. The finite element method is now widely used to solve a variety of important problems in the field of groundwater hydrology. Thus a clear understanding of the method is essential to scientists and engineers working in this field. The goal of this book is to provide the reader with the basic skills needed to use the finite element method to solve "real-world" problems. Examples are used throughout the text to illustrate each step in the solution process.
Download or read book Modeling Groundwater Flow and Contaminant Transport written by Jacob Bear and published by Springer Science & Business Media. This book was released on 2010-01-18 with total page 851 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many parts of the world, groundwater resources are under increasing threat from growing demands, wasteful use, and contamination. To face the challenge, good planning and management practices are needed. A key to the management of groundwater is the ability to model the movement of fluids and contaminants in the subsurface. The purpose of this book is to construct conceptual and mathematical models that can provide the information required for making decisions associated with the management of groundwater resources, and the remediation of contaminated aquifers. The basic approach of this book is to accurately describe the underlying physics of groundwater flow and solute transport in heterogeneous porous media, starting at the microscopic level, and to rigorously derive their mathematical representation at the macroscopic levels. The well-posed, macroscopic mathematical models are formulated for saturated, single phase flow, as well as for unsaturated and multiphase flow, and for the transport of single and multiple chemical species. Numerical models are presented and computer codes are reviewed, as tools for solving the models. The problem of seawater intrusion into coastal aquifers is examined and modeled. The issues of uncertainty in model input data and output are addressed. The book concludes with a chapter on the management of groundwater resources. Although one of the main objectives of this book is to construct mathematical models, the amount of mathematics required is kept minimal.
Download or read book Groundwater Flow and Quality Modelling written by E. Custodio and published by Springer Science & Business Media. This book was released on 1988-02-29 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Research Workshop on Advances in Analytical and Numerical Groundwater Flow and Quality Modelling, Lisbon, Portugal, June 2-6, 1987
Download or read book The Double Constraint Inversion Methodology written by Wouter Zijl and published by Springer. This book was released on 2017-12-26 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a novel physics-based approach to inverse modeling that makes use of the properties of the equations governing the physics of the processes under consideration. It focuses on the inverse problems occurring in hydrogeology, but the approach is also applicable to similar inverse problems in various other fields, such as petroleum-reservoir engineering, geophysical and medical imaging, weather forecasting, and flood prediction. This approach takes into consideration the physics – for instance, the boundary conditions required to obtain a well-posed mathematical problem – to help avoid errors in model building and therefore enhance the reliability of the results. In addition, this method requires less computation time and less computer memory. The theory is presented in a comprehensive, not overly mathematical, way, with three practice-oriented hydrogeological case studies and a comparison with the conventional approach illustrating the power of the method. Forward and Inverse Modeling of Groundwater Flow is of use to researchers and graduate students in the fields of hydrology, as well as to professional hydrologists within industry. It also appeals to geophysicists and those working in or studying petroleum reservoir modeling and basin modeling.
Download or read book Fundamentals of Ground water Modeling written by Jacob Bear and published by . This book was released on 1992 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analytical Groundwater Mechanics written by Otto D. L. Strack and published by Cambridge University Press. This book was released on 2017-08-07 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on applications and real-world problems, this advanced textbook explains the fundamentals of groundwater flow for students and professionals.
Download or read book Modelling and Simulation of Diffusive Processes written by S.K. Basu and published by Springer Science & Business Media. This book was released on 2014-04-15 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the key issues in the modeling and simulation of diffusive processes from a wide spectrum of different applications across a broad range of disciplines. Features: discusses diffusion and molecular transport in living cells and suspended sediment in open channels; examines the modeling of peristaltic transport of nanofluids, and isotachophoretic separation of ionic samples in microfluidics; reviews thermal characterization of non-homogeneous media and scale-dependent porous dispersion resulting from velocity fluctuations; describes the modeling of nitrogen fate and transport at the sediment-water interface and groundwater flow in unconfined aquifers; investigates two-dimensional solute transport from a varying pulse type point source and futile cycles in metabolic flux modeling; studies contaminant concentration prediction along unsteady groundwater flow and modeling synovial fluid flow in human joints; explores the modeling of soil organic carbon and crop growth simulation.
Download or read book Groundwater Science written by Charles R. Fitts and published by Academic Press. This book was released on 2012-08-06 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Groundwater Science, 2E, covers groundwater's role in the hydrologic cycle and in water supply, contamination, and construction issues. It is a valuable resource for students and instructors in the geosciences (with focuses in hydrology, hydrogeology, and environmental science), and as a reference work for professional researchers. This interdisciplinary text weaves important methods and applications from the disciplines of physics, chemistry, mathematics, geology, biology, and environmental science, introducing you to the mathematical modeling and contaminant flow of groundwater. New to the Second Edition:. New chapter on subsurface heat flow and geothermal systems. Expanded content on well construction and design, surface water hydrology, groundwater/ surface water interaction, slug tests, pumping tests, and mounding analysis.. Updated discussions of groundwater modeling, calibration, parameter estimation, and uncertainty. Free software tools for slug test analysis, pumping test analysis, and aquifer modeling. Lists of key terms and chapter contents at the start of each chapter. Expanded end-of-chapter problems, including more conceptual questions. Two-color figures. Homework problems at the end of each chapter and worked examples throughout. Companion website with videos of field exploration and contaminant migration experiments, PDF files of USGS reports, and data files for homework problems. PowerPoint slides and solution manual for adopting faculty.
Download or read book Analytic Element Modeling of Groundwater Flow written by H. M. Haitjema and published by Elsevier. This book was released on 1995-09-20 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling has become an essential tool for the groundwater hydrologist. Where field data is limited, the analytic element method (AEM) is rapidly becoming the modeling method of choice, especially given the availability of affordable modeling software. Analytic Element Modeling of Groundwater Flow provides all the basics necessary to approach AEM successfully, including a presentation of fundamental concepts and a thorough introduction to Dupuit-Forchheimerflow. This book is unique in its emphasis on the actual use of analytic element models. Real-world examples complement material presented in the text. An educational version of the analytic element program GFLOW is included to allow the reader to reproduce the various solutions to groundwater flow problems discussed in the text. Researchers and graduate students in groundwater hydrology, geology, andengineering will find this book an indispensable resource. * * Provides a fundamental introduction to the use of the analytic element method. * Offers a step-by-step approach to groundwater flow modeling. * Includes an educational version of the GFLOW modeling software.
Download or read book Ground water Modeling written by James W. Mercer and published by . This book was released on 1981 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for Evaluating Ground water Flow Models written by Thomas E. Reilly and published by DIANE Publishing. This book was released on 2004 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt:
