Download or read book Finite Elements for Solids Fluids and Optimization written by G. A. Mohr and published by Oxford University Press, USA. This book was released on 1992 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: The finite element method is a numerical procedure for solving the ordinary and partial differential equations that commonly arise in engineering and mathematical physics. This text offers a complete, self-contained introduction to the theory and application of finite element methods in solid mechanics, fluid mechanics, and optimization. The authors' extensive practical experience in the field allows for a text well balanced between theory and application. Techniques for formatting finite element apparatus to problems are carefully explained. Programming techniques for solving resulting FEM problems also receive comprehensive treatment. Worked examples are scattered throughout the text.
Download or read book Fluid structure Interactions written by Thomas Richter and published by Springer. This book was released on 2017-08-26 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book starts by introducing the fundamental concepts of mathematical continuum mechanics for fluids and solids and their coupling. Special attention is given to the derivation of variational formulations for the subproblems describing fluid- and solid-mechanics as well as the coupled fluid-structure interaction problem. Two monolithic formulations for fluid-structure interactions are described in detail: the well-established ALE formulation and the modern Fully Eulerian formulation, which can effectively deal with problems featuring large deformation and contact. Further, the book provides details on state-of-the-art discretization schemes for fluid- and solid-mechanics and considers the special needs of coupled problems with interface-tracking and interface-capturing techniques. Lastly, advanced topics like goal-oriented error estimation, multigrid solution and gradient-based optimization schemes are discussed in the context of fluid-structure interaction problems.
Download or read book Finite Element Multidisciplinary Analysis written by Kajal K. Gupta and published by AIAA. This book was released on 2003 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This book fills a gap within the finite element literature by addressing the challenges and developments in multidiscipli-nary analysis. Current developments include disciplines of structural mechanics, heat transfer, fluid mechanics, controls engineering and propulsion technology, and their interaction as encountered in many practical problems in aeronautical, aerospace, and mechanical engineering, among others. These topics are reflected in the 15 chapter titles of the book. Numerical problems are provided to illustrate the applicability of the techniques. Exercises may be solved either manually or by using suitable computer software. A version of the multidisciplinary analysis program STARS is available from the author. As a textbook, the book is useful at the senior undergraduate or graduate level. The practicing engineer will find it invaluable for solving full-scale practical problems.
Download or read book Characteristics Finite Element Methods in Computational Fluid Dynamics written by Joe Iannelli and published by Springer Science & Business Media. This book was released on 2006-09-24 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details a systematic characteristics-based finite element procedure to investigate incompressible, free-surface and compressible flows. Several sections derive the Fluid Dynamics equations from first thermo-mechanics principles and develop this multi-dimensional and infinite-directional upstream procedure by combining a finite element discretization with an implicit non-linearly stable Runge-Kutta time integration for the numerical solution of the Euler and Navier Stokes equations.
Download or read book Finite Element Method with Applications in Engineering written by Y. M. Desai and published by Pearson Education India. This book was released on 2011 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explains the finite element method with various engineering applications to help students, teachers, engineers and researchers. It explains mathematical modeling of engineering problems and approximate methods of analysis and different approaches.
Download or read book Finite Element Methods for Computational Fluid Dynamics written by Dmitri Kuzmin and published by SIAM. This book was released on 2014-12-18 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This informal introduction to computational fluid dynamics and practical guide to numerical simulation of transport phenomena covers the derivation of the governing equations, construction of finite element approximations, and qualitative properties of numerical solutions, among other topics. To make the book accessible to readers with diverse interests and backgrounds, the authors begin at a basic level and advance to numerical tools for increasingly difficult flow problems, emphasizing practical implementation rather than mathematical theory.?Finite Element Methods for Computational Fluid Dynamics: A Practical Guide?explains the basics of the finite element method (FEM) in the context of simple model problems, illustrated by numerical examples. It comprehensively reviews stabilization techniques for convection-dominated transport problems, introducing the reader to streamline diffusion methods, Petrov?Galerkin approximations, Taylor?Galerkin schemes, flux-corrected transport algorithms, and other nonlinear high-resolution schemes, and covers Petrov?Galerkin stabilization, classical projection schemes, Schur complement solvers, and the implementation of the k-epsilon turbulence model in its presentation of the FEM for incompressible flow problem. The book also describes the open-source finite element library ELMER, which is recommended as a software development kit for advanced applications in an online component.?
Download or read book Computational Fluid and Solid Mechanics 2003 written by K.J Bathe and published by Elsevier. This book was released on 2003-06-02 with total page 2485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the world's leading researchers and practitioners of computational mechanics, these new volumes meet and build on the eight key challenges for research and development in computational mechanics.Researchers have recently identified eight critical research tasks facing the field of computational mechanics. These tasks have come about because it appears possible to reach a new level of mathematical modelling and numerical solution that will lead to a much deeper understanding of nature and to great improvements in engineering design.The eight tasks are: - The automatic solution of mathematical models - Effective numerical schemes for fluid flows - The development of an effective mesh-free numerical solution method - The development of numerical procedures for multiphysics problems - The development of numerical procedures for multiscale problems - The modelling of uncertainties - The analysis of complete life cycles of systems - Education - teaching sound engineering and scientific judgement Readers of Computational Fluid and Solid Mechanics 2003 will be able to apply the combined experience of many of the world's leading researchers to their own research needs. Those in academic environments will gain a better insight into the needs and constraints of the industries they are involved with; those in industry will gain a competitive advantage by gaining insight into the cutting edge research being carried out by colleagues in academia. Features - Bridges the gap between academic researchers and practitioners in industry - Outlines the eight main challenges facing Research and Design in Computational mechanics and offers new insights into the shifting the research agenda - Provides a vision of how strong, basic and exciting education at university can be harmonized with life-long learning to obtain maximum value from the new powerful tools of analysis
Download or read book Elementary Thinking for the 21st Century written by Geoff A. Mohr, PhD and published by Xlibris Corporation. This book was released on 2014-11-11 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book delves into a unique mix of the following areas: 1. The psychology of learning, memory, and thinking 2. Tools for critical thinking and assessment 3. Collective thinking of groups, corporations, and the public 4. Measurement of attitudes and market research 5. Mathematical logic and computer programming 6. Planning and scheduling techniques 7. Optimization techniques (both linear and non-linear) 8. World's first finite element method (FEM) models of distribution, inventory, and traffic flow systems and optimization of them 9. Mohr's flow ratio design (FRD) optimization technique 10. Econometric modeling techniques (some of them new) The book is the most modern, technically resourced, and innovative study of thinking to date and will prove useful to a wide range of people, including managers, planners, engineers, scientists, teachers, psychologists, and politicians.
Download or read book The Finite Element Method Set written by O. C. Zienkiewicz and published by Elsevier. This book was released on 2005-11-25 with total page 1863 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sixth editions of these seminal books deliver the most up to date and comprehensive reference yet on the finite element method for all engineers and mathematicians. Renowned for their scope, range and authority, the new editions have been significantly developed in terms of both contents and scope. Each book is now complete in its own right and provides self-contained reference; used together they provide a formidable resource covering the theory and the application of the universally used FEM. Written by the leading professors in their fields, the three books cover the basis of the method, its application to solid mechanics and to fluid dynamics.* This is THE classic finite element method set, by two the subject's leading authors * FEM is a constantly developing subject, and any professional or student of engineering involved in understanding the computational modelling of physical systems will inevitably use the techniques in these books * Fully up-to-date; ideal for teaching and reference
Download or read book The Finite Element Analysis of Shells Fundamentals written by Dominique Chapelle and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors present a modern continuum mechanics and mathematical framework to study shell physical behaviors, and to formulate and evaluate finite element procedures. With a view towards the synergy that results from physical and mathematical understanding, the book focuses on the fundamentals of shell theories, their mathematical bases and finite element discretizations. The complexity of the physical behaviors of shells is analysed, and the difficulties to obtain uniformly optimal finite element procedures are identified and studied. Some modern finite element methods are presented for linear and nonlinear analyses. A state of the art monograph by leading experts.
Download or read book The Finite Element Method Solid mechanics written by O. C. Zienkiewicz and published by Butterworth-Heinemann. This book was released on 2000 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Elements for Engineers with ANSYS Applications written by Mohamed Gadala and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "The finite element method (FEM) is indispensable in modeling and simulation in various engineering and physical systems, including structural analysis, stress, strain, fluid mechanics, heat transfer, dynamics, eigenproblems, design optimization, sound propagation, electromagnetics, and coupled field problems. Incorporating theory, development of method, and the use of FEM in the commercial sector, this textbook integrates basic theory with real-life, design-oriented problems using ANSYS, the most commonly used computational software in the field"--
Download or read book Introduction to Finite Element Analysis and Design written by Nam-Ho Kim and published by John Wiley & Sons. This book was released on 2018-05-24 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces the basic concepts of FEM in an easy-to-use format so that students and professionals can use the method efficiently and interpret results properly Finite element method (FEM) is a powerful tool for solving engineering problems both in solid structural mechanics and fluid mechanics. This book presents all of the theoretical aspects of FEM that students of engineering will need. It eliminates overlong math equations in favour of basic concepts, and reviews of the mathematics and mechanics of materials in order to illustrate the concepts of FEM. It introduces these concepts by including examples using six different commercial programs online. The all-new, second edition of Introduction to Finite Element Analysis and Design provides many more exercise problems than the first edition. It includes a significant amount of material in modelling issues by using several practical examples from engineering applications. The book features new coverage of buckling of beams and frames and extends heat transfer analyses from 1D (in the previous edition) to 2D. It also covers 3D solid element and its application, as well as 2D. Additionally, readers will find an increase in coverage of finite element analysis of dynamic problems. There is also a companion website with examples that are concurrent with the most recent version of the commercial programs. Offers elaborate explanations of basic finite element procedures Delivers clear explanations of the capabilities and limitations of finite element analysis Includes application examples and tutorials for commercial finite element software, such as MATLAB, ANSYS, ABAQUS and NASTRAN Provides numerous examples and exercise problems Comes with a complete solution manual and results of several engineering design projects Introduction to Finite Element Analysis and Design, 2nd Edition is an excellent text for junior and senior level undergraduate students and beginning graduate students in mechanical, civil, aerospace, biomedical engineering, industrial engineering and engineering mechanics.
Download or read book Theory and Practice of Finite Elements written by Alexandre Ern and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presenting the mathematical theory of finite elements is organized into three main sections. The first part develops the theoretical basis for the finite element methods, emphasizing inf-sup conditions over the more conventional Lax-Milgrim paradigm. The second and third parts address various applications and practical implementations of the method, respectively. It contains numerous examples and exercises.
Download or read book A Collection of Technical Papers written by and published by . This book was released on 2001 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Doomsday Calculation written by G. A. Mohr and published by Xlibris Corporation. This book was released on 2012-09 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Doomsday Calculation The End of the Human Race « Our present population is at least twice that sustainable, resulting in excessive consumption, resource depletion, the energy crisis, pollution, global warming, environmental destruction, and evolution of new diseases. « We face economic collapse and increasing war and terrorism. « Causes of our problems include incompetent leadership in politics and business, corrupt capitalism, globalization, megacities built around cars, ¡¥junk¡¦ products and the ¡¥bullshit and brainwashing¡¦ used in religion, politics and business. « Unless we take drastic action to deal with our critical situation the earth will be so ravaged by environmental destruction, pollution, and climate change that we will be reduced to a subsistence existence or made extinct altogether like the 50% of animal species expected to disappear in the next 200 years. Industry and reader comment has included: ¡§Some provocative and timely issues.¡¨ ¡¨A huge topic.¡¨ ¡§A prophetic warning¡¨ ¡§This should be our bible.¡¨
Download or read book Automated Solution of Differential Equations by the Finite Element Method written by Anders Logg and published by Springer Science & Business Media. This book was released on 2012-02-24 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a tutorial written by researchers and developers behind the FEniCS Project and explores an advanced, expressive approach to the development of mathematical software. The presentation spans mathematical background, software design and the use of FEniCS in applications. Theoretical aspects are complemented with computer code which is available as free/open source software. The book begins with a special introductory tutorial for beginners. Following are chapters in Part I addressing fundamental aspects of the approach to automating the creation of finite element solvers. Chapters in Part II address the design and implementation of the FEnicS software. Chapters in Part III present the application of FEniCS to a wide range of applications, including fluid flow, solid mechanics, electromagnetics and geophysics.
