Download or read book Finite Element Software for Plates and Shells written by Ernest Hinton and published by . This book was released on 1984 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Element Methods for Plate and Shell Structures Formulations and algorithms written by Thomas J. R. Hughes and published by . This book was released on 1986 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Static and Dynamic Analyses of Plates and Shells written by Hou-Cheng Huang and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past decade or so much has been written on the various attempts to produce efficient, accurate and reliable Mindlin plate finite elements. In the late sixties, a degenerated, Mindlin-type, curved shell element was developed and subsequently many improvements in such elements have been made. Reliability and efficiency in use has always been a major objective. Degenerated shell elements have enjoyed widespread popularity despite certain potential defects, including shear and membrane lock ing behaviour and spurious mechanisms. After introducing the basic foundations of Mindlin-type elements, this book describes these defects and also gives the reasons for their occurrence. Furthermore, the author proposes an approach to overcome these defects. A series of linear benchmark tests are proposed to illustrate the performance of the assumed strain element formulations. The formula tions and applications for material non-linearity are also presented. Both isotropic and anisotropic material models are included together with the results for both static and transient dynamic analyses. Two associated programs are fully documented and provided on floppy discs with test examples. Source codes for the two associated programs are provided: one is for static analysis and the other for dynamic analysis, and the programs can be compiled and run on either a mini or mainframe coniputer via a terminal. The author hopes that this book may provide further impetus in the important research area of plate and shell element technology.
Download or read book Plate and Shell Structures written by Maria Radwańska and published by John Wiley & Sons. This book was released on 2017-02-06 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plate and Shell Structures: Selected Analytical and Finite Element Solutions Maria Radwañska, Anna Stankiewicz, Adam Wosatko, Jerzy Pamin Cracow University of Technology, Poland Comprehensively covers the fundamental theory and analytical and numerical solutions for different types of plate and shell structures Plate and Shell Structures: Selected Analytical and Finite Element Solutions not only provides the theoretical formulation of fundamental problems of mechanics of plates and shells, but also several examples of analytical and numerical solutions for different types of shell structures. The book contains advanced aspects related to stability analysis and a brief description of modern finite element formulations for plates and shells, including the discussion of mixed/hybrid models and locking phenomena. Key features: 52 example problems solved and illustrated by more than 200 figures, including 30 plots of finite element simulation results. Contents based on many years of research and teaching the mechanics of plates and shells to students of civil engineering and professional engineers. Provides the basis of an intermediate-level course on computational mechanics of shell structures. The book is essential reading for engineering students, university teachers, practitioners and researchers interested in the mechanics of plates and shells, as well as developers testing new simulation software.
Download or read book Plates and Shells written by Ansel C. Ugural and published by CRC Press. This book was released on 2017-10-02 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noted for its practical, accessible approach to senior and graduate-level engineering mechanics, Plates and Shells: Theory and Analysis is a long-time bestselling text on the subjects of elasticity and stress analysis. Many new examples and applications are included to review and support key foundational concepts. Advanced methods are discussed and analyzed, accompanied by illustrations. Problems are carefully arranged from the basic to the more challenging level. Computer/numerical approaches (Finite Difference, Finite Element, MATLAB) are introduced, and MATLAB code for selected illustrative problems and a case study is included.
Download or read book The Finite Element Analysis of Shells Fundamentals written by Dominique Chapelle and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors present a modern continuum mechanics and mathematical framework to study shell physical behaviors, and to formulate and evaluate finite element procedures. With a view towards the synergy that results from physical and mathematical understanding, the book focuses on the fundamentals of shell theories, their mathematical bases and finite element discretizations. The complexity of the physical behaviors of shells is analysed, and the difficulties to obtain uniformly optimal finite element procedures are identified and studied. Some modern finite element methods are presented for linear and nonlinear analyses. A state of the art monograph by leading experts.
Download or read book Adaptive Finite Element Analysis for Plates and Shells written by Lee Chi King and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Creative Systems in Structural and Construction Engineering written by Amarjit Singh and published by CRC Press. This book was released on 2001-01-01 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: An examination of creative systems in structural and construction engineering taken from conference proceedings. Topics covered range from construction methods, safety and quality to seismic response of structural elements and soils and pavement analysis.
Download or read book Shear flexible Finite element Models of Laminated Composite Plates and Shells written by Ahmed Khairy Noor and published by . This book was released on 1975 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Element Analysis of Plates and Shells written by Abdur Razzaque and published by . This book was released on 1972 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Analysis of Shells by Finite Elements written by Franz G. Rammerstorfer and published by Springer. This book was released on 2014-05-04 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-of-the-art nonlinear computational analysis of shells, nonlinearities due to large deformations and nonlinear material behavior, alternative shell element formulations, algorithms and implementational aspects, composite and sandwich shells, local and global instabilities, optimization of shell structures and concepts of shape finding methods of free from shells. Furthermore, algorithms for the treatment of the nonlinear stability behavior of shell structures (including bifurcation and snap-through buckling) are presented in the book.
Download or read book Plates and Shells for Smart Structures written by Erasmo Carrera and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart structures that contain embedded piezoelectric patches are loaded by both mechanical and electrical fields. Traditional plate and shell theories were developed to analyze structures subject to mechanical loads. However, these often fail when tasked with the evaluation of both electrical and mechanical fields and loads. In recent years more advanced models have been developed that overcome these limitations. Plates and Shells for Smart Structures offers a complete guide and reference to smart structures under both mechanical and electrical loads, starting with the basic principles and working right up to the most advanced models. It provides an overview of classical plate and shell theories for piezoelectric elasticity and demonstrates their limitations in static and dynamic analysis with a number of example problems. This book also provides both analytical and finite element solutions, thus enabling the reader to compare strong and weak solutions to the problems. Key features: compares a large variety of classical and modern approaches to plates and shells, such as Kirchhoff-Love , Reissner-Mindlin assumptions and higher order, layer-wise and mixed theories introduces theories able to consider electromechanical couplings as well as those that provide appropriate interface continuity conditions for both electrical and mechanical variables considers both static and dynamic analysis accompanied by a companion website hosting dedicated software MUL2 that is used to obtain the numerical solutions in the book, allowing the reader to reproduce the examples given as well as solve problems of their own The models currently used have a wide range of applications in civil, automotive, marine and aerospace engineering. Researchers of smart structures, and structural analysts in industry, will find all they need to know in this concise reference. Graduate and postgraduate students of mechanical, civil and aerospace engineering can also use this book in their studies. www.mul2.com
Download or read book Applications of ATILA FEM software to smart materials written by J.-C. Debus and published by Elsevier Inc. Chapters. This book was released on 2012-11-27 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vibration and sound radiation of structures, like plates or shells stiffened by frames or ribs, is a problem of interest in the analysis of aircraft and marine structures. If the ribs are uniformly spaced, then the composite structure is spatially periodic. Many authors have proposed solutions for stiffened infinite shells with simple shapes. But, when the shape is more complicated, such as for a submarine or an aircraft, the numerical methods are not appropriate and the finite element method seems justified with finite element characterizing the stiffeners. In this chapter, from the theory of shells with the complicating effects of anisotropy due to the stiffeners, one finite element is presented. After, the presentation of the boundary conditions on the shell, a first validation will be realized on circular cylindrical shells having tranverse stiffeners. The modes of vibration obtained from the new shell element are compared with analytical and experimental results. The second validation concerns an elastic target with a stiffened shell. The comparison is made between the use of the new shell element and a 3D analysis.
Download or read book Finite Element Analysis of Laminated Plates and Shells written by Peter Nan-Hshun Chang and published by . This book was released on 1978 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Element Analysis of Structures through Unified Formulation written by Erasmo Carrera and published by John Wiley & Sons. This book was released on 2014-07-29 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: The finite element method (FEM) is a computational tool widely used to design and analyse complex structures. Currently, there are a number of different approaches to analysis using the FEM that vary according to the type of structure being analysed: beams and plates may use 1D or 2D approaches, shells and solids 2D or 3D approaches, and methods that work for one structure are typically not optimized to work for another. Finite Element Analysis of Structures Through Unified Formulation deals with the FEM used for the analysis of the mechanics of structures in the case of linear elasticity. The novelty of this book is that the finite elements (FEs) are formulated on the basis of a class of theories of structures known as the Carrera Unified Formulation (CUF). It formulates 1D, 2D and 3D FEs on the basis of the same 'fundamental nucleus' that comes from geometrical relations and Hooke's law, and presents both 1D and 2D refined FEs that only have displacement variables as in 3D elements. It also covers 1D and 2D FEs that make use of 'real' physical surfaces rather than ’artificial’ mathematical surfaces which are difficult to interface in CAD/CAE software. Key features: Covers how the refined formulation can be easily and conveniently used to analyse laminated structures, such as sandwich and composite structures, and to deal with multifield problems Shows the performance of different FE models through the 'best theory diagram' which allows different models to be compared in terms of accuracy and computational cost Introduces an axiomatic/asymptotic approach that reduces the computational cost of the structural analysis without affecting the accuracy Introduces an innovative 'component-wise' approach to deal with complex structures Accompanied by a website hosting the dedicated software package MUL2 (www.mul2.com) Finite Element Analysis of Structures Through Unified Formulation is a valuable reference for researchers and practitioners, and is also a useful source of information for graduate students in civil, mechanical and aerospace engineering.
Download or read book Engineering Computation of Structures The Finite Element Method written by Maria Augusta Neto and published by Springer. This book was released on 2015-09-29 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents theories and the main useful techniques of the Finite Element Method (FEM), with an introduction to FEM and many case studies of its use in engineering practice. It supports engineers and students to solve primarily linear problems in mechanical engineering, with a main focus on static and dynamic structural problems. Readers of this text are encouraged to discover the proper relationship between theory and practice, within the finite element method: Practice without theory is blind, but theory without practice is sterile. Beginning with elasticity basic concepts and the classical theories of stressed materials, the work goes on to apply the relationship between forces, displacements, stresses and strains on the process of modeling, simulating and designing engineered technical systems. Chapters discuss the finite element equations for static, eigenvalue analysis, as well as transient analyses. Students and practitioners using commercial FEM software will find this book very helpful. It uses straightforward examples to demonstrate a complete and detailed finite element procedure, emphasizing the differences between exact and numerical procedures.
Download or read book The Finite Element Method in the Analysis of Plates and Shells written by Joseph W. Schier and published by . This book was released on 1977 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
