Download or read book Finite Elasticity And Viscoelasticity A Course In The Nonlinear Mechanics Of Solids written by Aleksey Drozdov and published by World Scientific. This book was released on 1996-01-11 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and self-consistent introduction to the nonlinear continuum mechanics of solids, from the main axioms to comprehensive aspects of the theory. The objective is to expose the most intriguing aspects of elasticity and viscoelasticity with finite strains in such a way as to ensure mathematical correctness, on the one hand, and to demonstrate a wide spectrum of physical phenomena typical only of nonlinear mechanics, on the other.A novel aspect of the book is that it contains a number of examples illustrating surprising behaviour in materials with finite strains, as well as comparisons between theoretical predictions and experimental data for rubber-like polymers and elastomers.The book aims to fill a gap between mathematicians specializing in nonlinear continuum mechanics, and physicists and engineers who apply the methods of solid mechanics to a wide range of problems in civil and mechanical engineering, materials science, and polymer physics. The book has been developed from a graduate course in applied mathematics which the author has given for a number of years.
Download or read book Finite Elasticity and Viscoelasticity written by Aleksey D. Drozdov and published by . This book was released on 1996 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and self-consistent introduction to the nonlinear continuum mechanics of solids, from the main axioms to comprehensive aspects of the theory. The objective is to expose the most intriguing aspects of elasticity and viscoelasticity with finite strains in such a way as to ensure mathematical correctness, on the one hand, and to demonstrate a wide spectrum of physical phenomena typical only of nonlinear mechanics, on the other.A novel aspect of the book is that it contains a number of examples illustrating surprising behaviour in materials with finite strains, as well as comparisons between theoretical predictions and experimental data for rubber-like polymers and elastomers.The book aims to fill a gap between mathematicians specializing in nonlinear continuum mechanics, and physicists and engineers who apply the methods of solid mechanics to a wide range of problems in civil and mechanical engineering, materials science, and polymer physics. The book has been developed from a graduate course in applied mathematics which the author has given for a number of years.
Download or read book Finite Elasticity And Viscoelasticity Course In The Nonlinear Mechanics Of Solids written by A.D. Drozdov and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Continuum Mechanics written by Ellis H. Dill and published by CRC Press. This book was released on 2006-11-10 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most books on continuum mechanics focus on elasticity and fluid mechanics. But whether student or practicing professional, modern engineers need a more thorough treatment to understand the behavior of the complex materials and systems in use today. Continuum Mechanics: Elasticity, Plasticity, Viscoelasticity offers a complete tour of the subject that includes not only elasticity and fluid mechanics but also covers plasticity, viscoelasticity, and the continuum model for fatigue and fracture mechanics. In addition to a broader scope, this book also supplies a review of the necessary mathematical tools and results for a self-contained treatment. The author provides finite element formulations of the equations encountered throughout the chapters and uses an approach with just the right amount of mathematical rigor without being too theoretical for practical use. Working systematically from the continuum model for the thermomechanics of materials, coverage moves through linear and nonlinear elasticity using both tensor and matrix notation, plasticity, viscoelasticity, and concludes by introducing the fundamentals of fracture mechanics and fatigue of metals. Requisite mathematical tools appear in the final chapter for easy reference. Continuum Mechanics: Elasticity, Plasticity, Viscoelasticity builds a strong understanding of the principles, equations, and finite element formulations needed to solve real engineering problems.
Download or read book Continuum Mechanics of Solids written by Lallit Anand and published by Oxford University Press. This book was released on 2020-07-21 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuum Mechanics of Solids is an introductory text for graduate students in the many branches of engineering, covering the basics of kinematics, equilibrium, and material response. As an introductory book, most of the emphasis is upon the kinematically linear theories of elasticity, plasticity, and viscoelasticity, with two additional chapters devoted to topics in finite elasticity. Further chapters cover topics in fracture and fatigue and coupled field problems, such as thermoelasticity, chemoelasticity, poroelasticity, and piezoelectricity. There is ample material for a two semester course, or by selecting only topics of interest for a one-semester offering. The text includes numerous examples to aid the student. A companion text with over 180 fully worked problems is also available.
Download or read book Hyperelasticity Primer written by Robert M. Hackett and published by Springer. This book was released on 2015-09-30 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the subject of hyperelasticity in a concise manner mainly directed to students of solid mechanics who have a familiarity with continuum mechanics. It focuses on important introductory topics in the field of nonlinear material behavior and presents a number of example problems and solutions to greatly aid the student in mastering the difficulty of the subject and gaining necessary insight. Professor Hackett delineates the concepts and applications of hyperelasticity in such a way that a new student of the subject can absorb the intricate details without having to wade through excessively complicated formulations. The book further presents significant review material on intricately related subjects such as tensor calculus and introduces some new formulations.
Download or read book Finite Elasticity Theory written by David J. Steigmann and published by Oxford University Press. This book was released on 2017-08-25 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing case studies and examples, the book aims to cover extensive research particularly on surface stress and topics related to the variational approach to the subject, and non-standard topics such as the rigorous treatment of constraints and a full discussion of algebraic inequalities associated with realistic material behaviour, and their implications. Serving as an introduction to the basic elements of Finite Elasticity, this textbook is the cornerstone for any graduate-level on the topic, while also providing a template for a host of theories in Solid Mechanics.
Download or read book Topics in Finite Elasticity written by Morton E. Gurtin and published by SIAM. This book was released on 1981-09-01 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents a derivation of the basic equations of the theory of finite elasticity.
Download or read book Nonlinear Solid Mechanics written by Gerhard A. Holzapfel and published by . This book was released on 2000-04-06 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a modern and comprehensive coverage of continuum mechanics, this volume includes information on "variational principles"--Significant, as this is the only method by which such material is actually utilized in engineering practice.
Download or read book The Catalogue of Computational Material Models written by Paul Steinmann and published by Springer Nature. This book was released on 2021-03-20 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive account of the formulation and computational treatment of basic geometrically linear models in 1D. To set the stage, it assembles some preliminaries regarding necessary modelling, computational and mathematical tools. Thereafter, the remaining parts are concerned with the actual catalogue of computational material models. To this end, after starting out with elasticity as a reference, further 15 different basic variants of material models (5 x each of {visco-elasticity, plasticity, visco-plasticity}, respectively) are systematically explored. The presentation for each of these basic material models is a stand-alone account and follows in each case the same structure. On the one hand, this allows, in the true sense of a catalogue, to consult each of the basic material models separately without the need to refer to other basic material models. On the other hand, even though this somewhat repetitious concept may seem tedious, it allows to compare the formulation and resulting algorithmic setting of the various basic material models and thereby to uncover, in detail, similarities and differences. In particular, the response of each basic material model is analysed for the identical histories (Zig-Zag, Sine, Ramp) of prescribed strain and stress so as to clearly showcase and to contrast to each other the characteristics of the various modelling options.
Download or read book Creep and Relaxation of Nonlinear Viscoelastic Materials written by William N. Findley and published by Courier Corporation. This book was released on 2013-01-15 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This pioneering book presents the basic theory, experimental methods, experimental results and solution of boundary value problems in a readable, useful way to designers as well as research workers and students. The mathematical background required has been kept to a minimum and supplemented by explanations where it has been necessary to introduce specialized mathematics. Also, appendices have been included to provide sufficient background in Laplace transforms and in step functions. Chapters 1 and 2 contain an introduction and historic review of creep. As an aid to the reader a background on stress, strain, and stress analysis is provided in Chapters 3 and 4, an introduction to linear viscoelasticity is found in Chapter 5 and linear viscoelastic stress analysis in Chapter 6. In the next six chapters the multiple integral representation of nonlinear creep and relaxation, and simplifications to single integral forms and incompressibility, are examined at length. After a consideration of other representations, general relations are derived, then expanded to components of stress or strain for special cases. Both constant stress (or strain) and variable states are described, together with methods of determining material constants. Conversion from creep to relaxation, effects of temperature and stress analysis problems in nonlinear materials are also treated here. Finally, Chapter 13 discusses experimental methods for creep and stress relaxation under combined stress. This chapter considers especially those experimental problems which must be solved properly when reliable experimental results of high precision are required. Six appendices present the necessary mathematical background, conversion tables, and more rigorous derivations than employed in the text. An extensive updated bibliography completes the book.
Download or read book Constitutive Modelling of Solid Continua written by José Merodio and published by Springer Nature. This book was released on 2019-11-14 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume consists of a collection of chapters by recognized experts to provide a comprehensive fundamental theoretical continuum treatment of constitutive laws used for modelling the mechanical and coupled-field properties of various types of solid materials. It covers the main types of solid material behaviour, including isotropic and anisotropic nonlinear elasticity, implicit theories, viscoelasticity, plasticity, electro- and magneto-mechanical interactions, growth, damage, thermomechanics, poroelasticity, composites and homogenization. The volume provides a general framework for research in a wide range of applications involving the deformation of solid materials. It will be of considerable benefit to both established and early career researchers concerned with fundamental theory in solid mechanics and its applications by collecting diverse material in a single volume. The readership ranges from beginning graduate students to senior researchers in academia and industry.
Download or read book Non Linear Elastic Deformations written by R. W. Ogden and published by Courier Corporation. This book was released on 2013-04-26 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classic in the field covers application of theory of finite elasticity to solution of boundary-value problems, analysis of mechanical properties of solid materials capable of large elastic deformations. Problems. References.
Download or read book Transdisciplinary Perspectives on Complex Systems written by Franz-Josef Kahlen and published by Springer. This book was released on 2016-08-16 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an internationally comprehensive perspective into the field of complex systems. It explores the challenges of and approaches to complexity from a broad range of disciplines, including big data, health care, medicine, mathematics, mechanical and systems engineering, air traffic control and finance. The book’s interdisciplinary character allows readers to identify transferable and mutually exclusive lessons learned among these disciplines and beyond. As such, it is well suited to the transfer of applications and methodologies between ostensibly incompatible disciplines. This book provides fresh perspectives on comparable issues of complexity from the top minds on systems thinking.
Download or read book Constitutive Models for Rubber III written by J. Busfield and published by CRC Press. This book was released on 2003-01-01 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in the modelling of rubber are collated in this volume, including not only stress-strain behaviour and the use of the large strain finite element method for simulation, but also fatigue, fracture, filler reinforcement, dynamic properties and the effects of ageing.
Download or read book Applied Mechanics of Solids written by Allan F. Bower and published by CRC Press. This book was released on 2009-10-05 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern computer simulations make stress analysis easy. As they continue to replace classical mathematical methods of analysis, these software programs require users to have a solid understanding of the fundamental principles on which they are based.Develop Intuitive Ability to Identify and Avoid Physically Meaningless PredictionsApplied Mechanics o
Download or read book Nonlinear Inclusions and Hemivariational Inequalities written by Stanisław Migórski and published by Springer Science & Business Media. This book was released on 2012-09-18 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the reader the theory of nonlinear inclusions and hemivariational inequalities with emphasis on the study of contact mechanics. The work covers both abstract results in the area of nonlinear inclusions, hemivariational inequalities as well as the study of specific contact problems, including their modelling and their variational analysis. Provided results are based on original research on the existence, uniqueness, regularity and behavior of the solution for various classes of nonlinear stationary and evolutionary inclusions. In carrying out the variational analysis of various contact models, one systematically uses results of hemivariational inequalities and, in this way, illustrates the applications of nonlinear analysis in contact mechanics. New mathematical methods are introduced and applied in the study of nonlinear problems, which describe the contact between a deformable body and a foundation. Contact problems arise in industry, engineering and geophysics. Their variational analysis presented in this book lies the background for their numerical analysis. This volume will interest mathematicians, applied mathematicians, engineers, and scientists as well as advanced graduate students.
