Download or read book Urban Energy Systems written by James Keirstead and published by Routledge. This book was released on 2013 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book analyses the technical and social systems that satisfy these needs and asks how methods can be put into practice to achieve this.

Download or read book Climate Change 2014 written by Groupe d'experts intergouvernemental sur l'évolution du climat and published by . This book was released on 2015 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Guide to Industrial Assessments for Pollution Prevention and Energy Efficiency written by and published by DIANE Publishing. This book was released on 2001 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Renewable Energy Sources and Climate Change Mitigation written by Ottmar Edenhofer and published by Cambridge University Press. This book was released on 2011-11-21 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Intergovernmental Panel on Climate Change Special Report (IPCC-SRREN) assesses the potential role of renewable energy in the mitigation of climate change. It covers the six most important renewable energy sources - bioenergy, solar, geothermal, hydropower, ocean and wind energy - as well as their integration into present and future energy systems. It considers the environmental and social consequences associated with the deployment of these technologies, and presents strategies to overcome technical as well as non-technical obstacles to their application and diffusion. SRREN brings a broad spectrum of technology-specific experts together with scientists studying energy systems as a whole. Prepared following strict IPCC procedures, it presents an impartial assessment of the current state of knowledge: it is policy relevant but not policy prescriptive. SRREN is an invaluable assessment of the potential role of renewable energy for the mitigation of climate change for policymakers, the private sector, and academic researchers.

Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors

Download or read book World Development Report 1994 written by and published by World Bank Publications. This book was released on 1994 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: World Development Report 1994 examines the link between infrastructure and development and explores ways in which developing countries can improve both the provision and the quality of infrastructure services. In recent decades, developing countries have made substantial investments in infrastructure, achieving dramatic gains for households and producers by expanding their access to services such as safe water, sanitation, electric power, telecommunications, and transport. Even more infrastructure investment and expansion are needed in order to extend the reach of services - especially to people living in rural areas and to the poor. But as this report shows, the quantity of investment cannot be the exclusive focus of policy. Improving the quality of infrastructure service also is vital. Both quantity and quality improvements are essential to modernize and diversify production, help countries compete internationally, and accommodate rapid urbanization. The report identifies the basic cause of poor past performance as inadequate institutional incentives for improving the provision of infrastructure. To promote more efficient and responsive service delivery, incentives need to be changed through commercial management, competition, and user involvement. Several trends are helping to improve the performance of infrastructure. First, innovation in technology and in the regulatory management of markets makes more diversity possible in the supply of services. Second, an evaluation of the role of government is leading to a shift from direct government provision of services to increasing private sector provision and recent experience in many countries with public-private partnerships is highlighting new ways to increase efficiency and expand services. Third, increased concern about social and environmental sustainability has heightened public interest in infrastructure design and performance.

Download or read book The Biomass Assessment Handbook written by Frank Rosillo-Calle and published by Taylor & Francis. This book was released on 2012-04-27 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing importance of biomass as a renewable energy source has lead to an acute need for reliable and detailed information on its assessment, consumption and supply. Responding to this need, and overcoming the lack of standardized measurement and accounting procedures, this handbook provides the reader with the skills to understand the biomass resource base, the tools to assess the resource, and explores the pros and cons of exploitation. Topics covered include assessment methods for woody and herbaceous biomass, biomass supply and consumption, remote sensing techniques as well as vital policy issues. International case studies, ranging from techniques for measuring tree volume to transporting biomass, help to illustrate step-by-step methods and are based on field work experience. Technical appendices offer a glossary of terms, energy units and other valuable resource data.

Download or read book Annual Energy Outlook 2012 with Projections To 2035 written by Energy Information Administration (U S ) and published by Government Printing Office. This book was released on 2012-10-04 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The projections in the U.S. Energy Information Administration's (EIA's) Annual Energy Outlook 2012 (AEO2012) focus on the factors that shape the U.S. energy system over the long term. Under the assumption that current laws and regulations remain unchanged throughout the projections, the AEO2012 Reference case provides the basis for examination and discussion of energy production, consumption, technology, and market trends and the direction they may take in the future. It also serves as a starting point for analysis of potential changes in energy policies. But AEO2012 is not limited to the Reference case. It also includes 29 alternative cases (see Appendix E, Table E1), which explore important areas of uncertainty for markets, technologies, and policies in the U.S. energy economy. Many of the implications of the alternative cases are discussed in the 'Issues in focus' section of this report. / Key results highlighted in AEO2012 include continued modest growth in demand for energy over the next 25 years and increased domestic crude oil and natural gas production, largely driven by rising production from tight oil and shale resources. As a result, U.S. reliance on imported oil is reduced; domestic production of natural gas exceeds consumption, allowing for net exports; a growing share of U.S. electric power generation is met with natural gas and renewables; and energy-related carbon dioxide emissions remain below their 2005 level from 2010 to 2035, even in the absence of new Federal policies designed to mitigate greenhouse gas (GHG) emissions."--Executive Summary (p. 2).

Download or read book Steam Generators and Waste Heat Boilers written by V. Ganapathy and published by CRC Press. This book was released on 2014-10-10 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporates Worked-Out Real-World Problems Steam Generators and Waste Heat Boilers: For Process and Plant Engineers focuses on the thermal design and performance aspects of steam generators, HRSGs and fire tube, water tube waste heat boilers including air heaters, and condensing economizers. Over 120 real-life problems are fully worked out which will help plant engineers in evaluating new boilers or making modifications to existing boiler components without assistance from boiler suppliers. The book examines recent trends and developments in boiler design and technology and presents novel ideas for improving boiler efficiency and lowering gas pressure drop. It helps plant engineers understand and evaluate the performance of steam generators and waste heat boilers at any load. Learn How to Independently Evaluate the Thermal Performance of Boilers and Their Components This book begins with basic combustion and boiler efficiency calculations. It then moves on to estimation of furnace exit gas temperature (FEGT), furnace duty, view factors, heat flux, and boiler circulation calculations. It also describes trends in large steam generator designs such as multiple-module; elevated drum design types of boilers such as D, O, and A; and forced circulation steam generators. It illustrates various options to improve boiler efficiency and lower operating costs. The author addresses the importance of flue gas analysis, fire tube versus water tube boilers used in chemical plants, and refineries. In addition, he describes cogeneration systems; heat recovery in sulfur plants, hydrogen plants, and cement plants; and the effect of fouling factor on performance. The book also explains HRSG simulation process and illustrates calculations for complete performance evaluation of boilers and their components. Helps plant engineers make independent evaluations of thermal performance of boilers before purchasing them Provides numerous examples on boiler thermal performance calculations that help plant engineers develop programming codes with ease Follows the metric and SI system, and British units are shown in parentheses wherever possible Includes calculation procedures for the basic sizing and performance evaluation of a complete steam generator or waste heat boiler system and their components with appendices outlining simplified procedures for estimation of heat transfer coefficients Steam Generators and Waste Heat Boilers: For Process and Plant Engineers serves as a source book for plant engineers, consultants, and boiler designers.

Download or read book Cities Towns Renewable Energy written by Organisation for Economic Co-operation and Development and published by OECD. This book was released on 2009 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes several case studies chosen to illustrate how enhanced deployment of renewable energy projects can result from local policy regardless of a community's size or location.

Download or read book Nitrogen oxides NOx why and how they are controlled written by and published by DIANE Publishing. This book was released on 1999 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Process Engineering and Industrial Management written by Jean-Pierre Dal Pont and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Engineering, the science and art of transforming raw materials and energy into a vast array of commercial materials, was conceived at the end of the 19th Century. Its history in the role of the Process Industries has been quite honorable, and techniques and products have contributed to improve health, welfare and quality of life. Today, industrial enterprises, which are still a major source of wealth, have to deal with new challenges in a global world. They need to reconsider their strategy taking into account environmental constraints, social requirements, profit, competition, and resource depletion. “Systems thinking” is a prerequisite from process development at the lab level to good project management. New manufacturing concepts have to be considered, taking into account LCA, supply chain management, recycling, plant flexibility, continuous development, process intensification and innovation. This book combines experience from academia and industry in the field of industrialization, i.e. in all processes involved in the conversion of research into successful operations. Enterprises are facing major challenges in a world of fierce competition and globalization. Process engineering techniques provide Process Industries with the necessary tools to cope with these issues. The chapters of this book give a new approach to the management of technology, projects and manufacturing. Contents Part 1: The Company as of Today 1. The Industrial Company: its Purpose, History, Context, and its Tomorrow?, Jean-Pierre Dal Pont. 2. The Two Modes of Operation of the Company – Operational and Entrepreneurial, Jean-Pierre Dal Pont. 3. The Strategic Management of the Company: Industrial Aspects, Jean-Pierre Dal Pont. Part 2: Process Development and Industrialization 4. Chemical Engineering and Process Engineering, Jean-Pierre Dal Pont. 5. Foundations of Process Industrialization, Jean-François Joly. 6. The Industrialization Process: Preliminary Projects, Jean-Pierre Dal Pont and Michel Royer. 7. Lifecycle Analysis and Eco-Design: Innovation Tools for Sustainable Industrial Chemistry, Sylvain Caillol. 8. Methods for Design and Evaluation of Sustainable Processes and Industrial Systems, Catherine Azzaro-Pantel. 9. Project Management Techniques: Engineering, Jean-Pierre Dal Pont. Part 3: The Necessary Adaptation of the Company for the Future 10. Japanese Methods, Jean-Pierre Dal Pont. 11. Innovation in Chemical Engineering Industries, Oliver Potier and Mauricio Camargo. 12. The Place of Intensified Processes in the Plant of the Future, Laurent Falk. 13. Change Management, Jean-Pierre Dal Pont. 14. The Plant of the Future, Jean-Pierre Dal Pont.

Download or read book Transactions of the Third Circum Pacific Energy and Mineral Resources Conference written by Stuart T. Watson and published by . This book was released on 1982 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Renewable Energy in the GCC Countries written by Imern Jeridi Bachellerie and published by . This book was released on 2012 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to help identify the potential role that renewable energy sources (RES) can play in the future energy mix of the GCC countries; it looks closely at the major past and present renewable energy initiatives and policies, as well as industrial and research capabilities in the region, with a specific focus on solar and wind energy technologies. In doing so, this study examines the drivers and requirements for the deployment of these energy sources and their possible integration into sectors as different as electricity generation, water desalination or green building. Illustrated by a wealth of practical cases and studies, and aspiring to be used as a reference book, this study aims to help researchers comprehend the overall capabilities and achievements of the GCC countries in the renewable energy field, so that perspectives on the region's strategic energy issues are objective and sustainable models are encouraged. Even when topics beyond their fields are discussed, researchers from many diverse fields will find the style to be accessible, while information remains detailed and 'technical'. The book's multidisciplinary approach gives voice to all stakeholders without judgment or partisanship, leaving the reader free to form his or her own opinion about the challenges that are at stake, and decide the course of action that is required by the current situation.

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1995-03 with total page 1208 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sustainable Energy written by David J. C. MacKay and published by . This book was released on 2009 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Future of Nuclear Fuel Cycle written by and published by . This book was released on 2011 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In this analysis we have presented a method that provides insight into future fuel cycle alternatives by clarifying the complexity of choosing an appropriate fuel cycle in the context of the distribution of burdens and benefits between generations. The current nuclear power deployment practices, together with three future fuel cycles were assessed."--Page 227.