Download or read book Final Report for Tank 241 BX 104 Push Mode Core 126 and 127 written by and published by . This book was released on 1996 with total page 1763 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the final sample analysis report for tank 241-BX-104 (BX-104), cores 126 and 127. Two segments from each core yielded a total of 11 samples which were analyzed. The data quality objectives (DQOs) applicable to this sampling event were the Safety Screening DQO (Dukelow et al. 1995) and the Organic Safety DQO (Turner et al. 1995). The samples were received, extruded and analyzed at PNNL 325 Analytical Chemistry Laboratory (ACL). The analyses were performed in accordance with the Sample Analysis Plan (Gretsinger 1996) and indicated that the tank is safe with respect to the criteria in the Safety Screening and Organic DQO. Detailed analytical results were described in the analytical laboratory 45-day Report (Attachment 1, WHC-SD-WM-DP-171, REV. 0) and final report (Attachment 2, PNL-BX-104 REV. 1) prepared by PNNL, 325 Laboratory. Corrections and/or exceptions to the PNNL final report are provided.
Download or read book Final Report for Tank 241 B 106 Push Mode Cores 93 and 94 written by and published by . This book was released on 1996 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lord Byron s Tragedies written by and published by . This book was released on 1822 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 90 Day Safety Screen Results and Final Report for Tank 241 B 104 Push mode Cores 88 and 89 Revision 1 written by and published by . This book was released on 1995 with total page 1316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document reports the final screen results for tank 241-B-104 Push Mode, Cores 88 and 89.
Download or read book Final Report for Tank 241 BY 105 Rotary and Push Mode Core 108 written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Final Report for tank 241-BY-105 rotary and push mode core 108.
Download or read book Final Results for Tank 241 BX 112 Push Mode Cores 118 and 119 written by and published by . This book was released on 1996 with total page 2443 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Final Report for Tank 241 B 204 Push Mode Cores 112 and 114 written by and published by . This book was released on 1996 with total page 1687 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document serves as the final report deliverable for the tank 241-B-204 core samples collected between October 11 and October 19, 1995.
Download or read book Final Report for Tank 241 U 201 Push Mode Cores 70 73 and 74 Revision 1 written by and published by . This book was released on 1995 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document summarizes the sampling activities for tank 241-U-201.
Download or read book Final Report for Tank 241 S 107 Push Mode Cores 105 110 and 111 written by and published by . This book was released on 1996 with total page 2590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three cores from tank 241-S-107 were received by the 222-S Laboratory and underwent analyses to meet the requirements of the Tank Safety Screening Data Quality Objective and Historical Model Evaluation Data Requirements.
Download or read book Final Report for Tank 241 BY 106 Cores 64 65 and 121 written by and published by . This book was released on 1996 with total page 3505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Final Report for Tank 241-BY-106; Rotary Mode Cores 64 and 65.
Download or read book Final Report for Tank 241 B 101 Push Mode Cores 90 and 91 Revision 1 written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the final report for tank 241-@101, cores 90 and 91. Samples from these cores were analyzed for safety screening purposes in accordance with the Tank 241-B-101 Tank Characterization Plan (TCP) (Reference 1). This final report contains the results for three sets of TGA and gravimetric analyses performed after the 90-day report was issued. Two of these TGA/gravimetric percent water sets of analyses were done because low original TGA results were obtained for the lower half segment of core 90, segment 2 and the facie of core 91, segment 2; the third set of analyses were performed because the TGA and gravimetric percent water results for the upper half segment of core 90, segment 2 differed by approximately a factor of three and further investigation was warranted.
Download or read book Final Results for Tank 241 U 105 Push Mode Cores 131 133 and 136 written by and published by . This book was released on 1996 with total page 2761 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document summarizes the final results of push mode core samples 131, 133, and 136 for tank 241-U-105.
Download or read book Final Results for Tank 241 S 101 Push Mode Cores 137 138 and 142 written by and published by . This book was released on 1996 with total page 1751 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tank 241 U 106 Cores 147 and 148 Analytical Results for the Final Report written by and published by . This book was released on 1996 with total page 1365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document is the final report deliverable for tank 241-U-106 push mode core segments collected between May 8, 1996 and May 10, 1996 and received by the 222-S Laboratory between May 14, 1996 and May 16, 1996. The segments were subsampled and analyzed in accordance with the Tank 241-U-106 Push Mode Core Sampling and analysis Plan (TSAP), the Historical Model Evaluation Data Requirements (Historical DQO), Data Quality Objective to Support Resolution of the Organic Complexant Safety Issue (Organic DQO) and the Safety Screening Data Quality Objective (DQO). The analytical results are included in Table 1.
Download or read book Tank 241 TX 104 Cores 230 and 231 Analytical Results for the Final Report written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This document is the analytical laboratory report for tank 241-TX-104 push mode core segments collected between February 18, 1998 and February 23, 1998. The segments were subsampled and analyzed in accordance with the Tank 241-TX-104 Push Mode Core Sampling and Analysis Plan (TSAP) (McCain, 1997), the Data Quality Objective to Support Resolution of the Organic Complexant Safety Issue (Organic DQO) (Turner, et al., 1995) and the Safety Screening Data Quality Objective (DQO) (Dukelow, et.al., 1995). The analytical results are included in the data summary table. None of the samples submitted for Differential Scanning Calorimetry (DSC) and Total Alpha Activity (AT) exceeded notification limits as stated in the TSAP. The statistical results of the 95% confidence interval on the mean calculations are provided by the Tank Waste Remediation Systems Technical Basis Group in accordance with the Memorandum of Understanding (Schreiber, 1997) and are not considered in this report. Appearance and Sample Handling Attachment 1 is a cross reference to relate the tank farm identification numbers to the 222-S Laboratory LabCore/LIMS sample numbers. The subsamples generated in the laboratory for analyses are identified in these diagrams with their sources shown. Core 230: Three push mode core segments were removed from tank 241-TX-104 riser 9A on February 18, 1998. Segments were received by the 222-S Laboratory on February 19, 1998. Two segments were expected for this core. However, due to poor sample recovery, an additional segment was taken and identified as 2A. Core 231: Four push mode core segments were removed from tank 241-TX-104 riser 13A between February 19, 1998 and February 23, 1998. Segments were received by the 222-S Laboratory on February 24, 1998. Two segments were expected for this core. However, due to poor sample recovery, additional segments were taken and identified as 2A and 2B. The TSAP states the core samples should be transported to the laboratory within three calendar days from the time each segment is removed from the tank; this requirement was not met for the segments from Core 231.
Download or read book Tank 241 B 106 Push Mode Core Sampling and Analysis Plan written by and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
