Download or read book Film Processing Advances written by Toshitaka Kanai and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2014-07-03 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume deals with manufacturing processes for preparing very thin polymer products. Many professionals working on polymer films have requested that a newer version of Film Processing be published that includes more recent technologies and addresses the latest literature. Film Processing Advances provides a timely response to these requests. This edition is still a technically oriented book to be used by film processing professionals, graduate students, and researchers and it covers recent technologies of film extrusion, extruder screw design, die design, film structure, film temperature, crystallization dynamics, and film properties. Furthermore, Film Processing Advances focuses on multilayered films and recent developments relating to high performance films. The chapters in this edition are all essentially new and were designed to complement the materials found in Film Processing, which remains a relevant and important information resource.
Download or read book Advances in Film Processing Systems Technology and Quality Control in Medical Imaging written by Arthur G. Haus and published by Medical Physics Publishing Corporation. This book was released on 2001 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by one of the legends in the film processing field, this book provides a state-of-the-art summary of not only the physicical aspects of film processing, but the administrative issues as well. Its chapters have information of interest to medical physicists, technologists, radiologists, service engineers, and other industry professionals.
Download or read book Film Processing written by Toshitaka Kanai and published by . This book was released on 1999-01-01 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Film Processing written by Toshitaka Kanai and published by Hanser Publications. This book was released on 2011 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacturing process for preparing very thin polymer products has developed into what is arguably the largest outlet for synthetic polymers. The central theme of this volume is the developments in process hardware and operating techniques that permit increasingly high production rates, optimum property development, unusual degrees of molecular orientation, and the coextrusion of multi-layer, multi-component film and sheet. The strong relationships and the interdependence of these developments on the achievements in polymer design, such as rheology and mechanical and optical properties, are also discussed. Progress in Polymer Processing Series
Download or read book Way Beyond Monochrome written by Ralph W. Lambrecht and published by Taylor & Francis. This book was released on 2011 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: An inspirational bible for monochrome photography - this second edition almost doubles the content of its predecessor showing you the path from visualization to print
Download or read book Handbook of Industrial Polyethylene and Technology written by Mark A. Spalding and published by John Wiley & Sons. This book was released on 2017-10-12 with total page 1410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an exhaustive description of polyethylene. The 50+ chapters are written by some of the most experienced and prominent authors in the field, providing a truly unique view of polyethylene. The book starts with a historical discussion on how low density polyethylene was discovered and how it provided unique opportunities in the early days. New catalysts are presented and show how they created an expansion in available products including linear low density polyethylene, high density polyethylene, copolymers, and polyethylene produced from metallocene catalysts. With these different catalysts systems a wide range of structures are possible with an equally wide range of physical properties. Numerous types of additives are presented that include additives for the protection of the resin from the environment and processing, fillers, processing aids, anti-fogging agents, pigments, and flame retardants. Common processing methods including extrusion, blown film, cast film, injection molding, and thermoforming are presented along with some of the more specialized processing techniques such as rotational molding, fiber processing, pipe extrusion, reactive extrusion, wire and cable, and foaming processes. The business of polyethylene including markets, world capacity, and future prospects are detailed. This handbook provides the most current and complete technology assessments and business practices for polyethylene resins.
Download or read book Langford s Advanced Photography written by Efthimia Bilissi and published by CRC Press. This book was released on 2013-01-25 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Langford's Advanced Photography is the only advanced photography guide a serious student or aspiring professional will ever need. In this eighth edition, Efthimia Bilissi continues in the footsteps of Michael Langford by combining an unrivalled level of technical detail with a straightforward writing style while simultaneously bringing the text firmly in to the digital era. This book covers the entire photographic process from a technical standpoint - not only detailing the 'how' but also explaining the 'why' that is so often missing from photography texts. From the workings of cameras, lenses, digital imaging sensors and software to new hot topics such as HDR imaging, digital asset management, and even running your own photography business, everything a serious photographer could need to extend their art into professional realms is covered. The book also benefits from a full glossary, charts and inspirational full color images throughout, with summaries and projects at the end of each chapter to reinforce the theory.
Download or read book Optical Diagnostics for Thin Film Processing written by Irving P. Herman and published by Elsevier. This book was released on 1996-10-23 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume describes the increasing role of in situ optical diagnostics in thin film processing for applications ranging from fundamental science studies to process development to control during manufacturing. The key advantage of optical diagnostics in these applications is that they are usually noninvasive and nonintrusive. Optical probes of the surface, film, wafer, and gas above the wafer are described for many processes, including plasma etching, MBE, MOCVD, and rapid thermal processing. For each optical technique, the underlying principles are presented, modes of experimental implementation are described, and applications of the diagnostic in thin film processing are analyzed, with examples drawn from microelectronics and optoelectronics. Special attention is paid to real-time probing of the surface, to the noninvasive measurement of temperature, and to the use of optical probes for process control. Optical Diagnostics for Thin Film Processing is unique. No other volume explores the real-time application of optical techniques in all modes of thin film processing. The text can be used by students and those new to the topic as an introduction and review of the subject. It also serves as a comprehensive resource for engineers, technicians, researchers, and scientists already working in the field. The only volume that comprehensively explores in situ, real-time, optical probes for all types of thin film processing Useful as an introduction to the subject or as a resource handbook Covers a wide range of thin film processes including plasma etching, MBE, MOCVD, and rapid thermal processing Examples emphasize applications in microelectronics and optoelectronics Introductory chapter serves as a guide to all optical diagnostics and their applications Each chapter presents the underlying principles, experimental implementation, and applications for a specific optical diagnostic
Download or read book Film Processing written by Toshitaka Kanai and published by . This book was released on 2014 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This volume deals with manufacturing processes for preparing very thin polymer products"--Provided by publisher.
Download or read book Alkynes Advances in Research and Application 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-06-21 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alkynes—Advances in Research and Application: 2013 Edition is a ScholarlyBrief™ that delivers timely, authoritative, comprehensive, and specialized information about Polyacetylenes in a concise format. The editors have built Alkynes—Advances in Research and Application: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Polyacetylenes in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Alkynes—Advances in Research and Application: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Microelectromechanical Systems written by National Research Council and published by National Academies Press. This book was released on 1998-01-01 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectromenchanical systems (MEMS) is a revolutionary field that adapts for new uses a technology already optimized to accomplish a specific set of objectives. The silicon-based integrated circuits process is so highly refined it can produce millions of electrical elements on a single chip and define their critical dimensions to tolerances of 100-billionths of a meter. The MEMS revolution harnesses the integrated circuitry know-how to build working microsystems from micromechanical and microelectronic elements. MEMS is a multidisciplinary field involving challenges and opportunites for electrical, mechanical, chemical, and biomedical engineering as well as physics, biology, and chemistry. As MEMS begin to permeate more and more industrial procedures, society as a whole will be strongly affected because MEMS provide a new design technology that could rivalâ€"perhaps surpassâ€"the societal impact of integrated circuits.
Download or read book Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials III Volume 30 Issue 8 written by Tatsuki Ohji and published by John Wiley & Sons. This book was released on 2009-12-17 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue contains 25 invited and contributed papers, all peer reviewed according to the American Ceramic Society Review Process. The latest developments in processing and manufacturing technologies are covered, including smart processing, advanced composite manufacturing, novel forming and sintering technologies, microwave-processing, polymer-based processing, and film deposition technologies. These papers discuss the most important aspects necessary for understanding and further development of processing and manufacturing of ceramic materials and systems.
Download or read book Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II written by Tatsuki Ohji and published by John Wiley & Sons. This book was released on 2009-02-11 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a one-stop resource, compiling current research on advanced processing and manufacturing technologies for structural and multifunctional materials. It is a collection of papers from The American Ceramic Society s 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008. Topics include advanced processing and manufacturing technologies for a wide variety of non-oxide and oxide based structural ceramics, ultra-high temperature ceramics and composites, particulate and fiber reinforced composites, and multifunctional materials. This is a valuable, up-to-date resource for researchers in the field.
Download or read book Blown Film Extrusion written by Kirk Cantor and published by . This book was released on 2018 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: "From hardware and materials through processing and properties, a broad coverage of blown film extrusion is presented. A primary objective of this book is to ensure a useful balance of theory and practice. The reader will find the answers to why they encounter certain effects in the blown film process so that they are better able to troubleshoot and improve their operations. At the same time, current practices and equipment are emphasized to keep readers up-to-date with the most productive and efficient technology. The companion computer-based learning tool, The Blown Film Extrusion Simulator, is provided to enhance the reader's understanding. This software was developed specifically to teach blown film extrusion equipment operation and processing principles, and is available for download. Throughout this book, exercises using the simulator are described to complement the methods and principles explained. New in this third edition is a chapter on polymer rheology, with an overview of the rheology of polymer melts and its effect on extruding blown film. Additionally, improvements and corrections have been made throughout the book. Contents: Materials for Blown Film Polymer Rheology Extrusion Overview Hardware for Blown Film Processing Coextrusion Film Properties Troubleshooting"--
Download or read book Advanced Ceramic and Metallic Coating and Thin Film Materials for Energy and Environmental Applications written by Jing Zhang and published by Springer. This book was released on 2017-07-16 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the recent developments, perspectives on future research, and pertinent data from academia, industry, and government research laboratory to discuss fundamental mechanisms as well as processing and applications of advanced metallic and ceramic thin film and coating materials for energy and environmental applications. It is a platform to disseminate the latest research progress related to processing, characterization, and modelling. The authors address both thermal barrier and environmental coatings; magnetic and thermoelectric materials; and solar cell and solid oxide fuel cell materials. It is appropriate supplementary reading for students and primary reading for researchers in materials science and engineering.
Download or read book Manufacturing and Novel Applications of Multilayer Polymer Films written by Deepak Langhe and published by William Andrew. This book was released on 2016-01-04 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing and Novel Applications of Multilayer Polymer Films discusses the advancements in multilayer technology, including its capability to produce hundreds of layers in a single film by a melt coextrusion process. These engineered films can have significantly enhanced performance properties, allowing films to be made thinner, stronger, and with better sealing properties. As recent developments in feedblocks and materials have opened up a range of new possibilities, this book discusses different feedblocks, and viscosity and material considerations. It is the first comprehensive summary of the latest technology in multilayer film processing and related applications, and is written from a practical perspective, translating research into commercial production and real world products. The book provides fundamental knowledge on microlayer coextrusion processing technology, how to fabricate such structures, structure and properties of such microlayers, and potential applications, thus helping research scientists and engineers develop products which not only fulfill their primary function, but can also be manufactured reliably, safely, and economically. Provides a fundamental knowledge of microlayer coextrusion processing, including how to fabricate microlayer structures, the properties of microlayers, and potential applications, including optics, polymer film capacitors, and semiconductors Includes an in-depth analysis of all technologies used for producing multilayered films and structures by coextrusion processing Thoroughly assesses potential future trends in multilayer coextrusion technology, thus enabling engineers and scientists to stay ahead of the curve in this rapidly advancing area
Download or read book Advances in Superconductivity III written by Koji Kajimura and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the discovery of high temperature superconductors, many new materials have been invented. In the last year, several new materials were also discovered, but their critical temperatures are still below lOOK. Precise physical and chemical work has made tremendous progress in the theoretical and experimental study of physical properties and carrier state characterizations. The de Haas van Alphen effect measurement showed the existence of a Fermi surface in YBCO. Flux dynamics is a well-known new problem in which flux creep and irreversibility line features are especially important for a fundamental understanding of the critical current and flux pinning. Flux pinning centers which are intentionally added using non-superconducting precipitates, neutrons, and protons, etc. increase critical currents to practical levels. The analysis of electric and magnetic properties are expected to reveal the pinning mechanism and also to further application development. As for wires and bulks, many melt-like sintering techniques have improved the material performance of critical current densities. A new seeding Quench-Melt Growth technique enlarged crystal size and increased the repulsion force. These melting processes, in conjunction with a mechanical strength improvement have been effectively introduced into wire fabrication in order to realize kilometer range wires and will put the oxide wires to practical use. Where thin film is con cerned, when many fabrication methods had been developed using the assistance effect of activated oxygen such as ozone and oxygen radicals, a high current 2 density of 106A/cm at 77K was reported.
