Download or read book Gas Turbine Heat Transfer and Cooling Technology Second Edition written by Je-Chin Han and published by CRC Press. This book was released on 2012-11-27 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference for engineers and researchers, Gas Turbine Heat Transfer and Cooling Technology, Second Edition has been completely revised and updated to reflect advances in the field made during the past ten years. The second edition retains the format that made the first edition so popular and adds new information mainly based on selected published papers in the open literature. See What’s New in the Second Edition: State-of-the-art cooling technologies such as advanced turbine blade film cooling and internal cooling Modern experimental methods for gas turbine heat transfer and cooling research Advanced computational models for gas turbine heat transfer and cooling performance predictions Suggestions for future research in this critical technology The book discusses the need for turbine cooling, gas turbine heat-transfer problems, and cooling methodology and covers turbine rotor and stator heat-transfer issues, including endwall and blade tip regions under engine conditions, as well as under simulated engine conditions. It then examines turbine rotor and stator blade film cooling and discusses the unsteady high free-stream turbulence effect on simulated cascade airfoils. From here, the book explores impingement cooling, rib-turbulent cooling, pin-fin cooling, and compound and new cooling techniques. It also highlights the effect of rotation on rotor coolant passage heat transfer. Coverage of experimental methods includes heat-transfer and mass-transfer techniques, liquid crystal thermography, optical techniques, as well as flow and thermal measurement techniques. The book concludes with discussions of governing equations and turbulence models and their applications for predicting turbine blade heat transfer and film cooling, and turbine blade internal cooling.

Download or read book Springer Handbook of Experimental Fluid Mechanics written by Cameron Tropea and published by Springer Science & Business Media. This book was released on 2007-10-09 with total page 1570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanying DVD-ROM contains ... "all chapters of the Springer Handbook."--Page 3 of cover.

Download or read book Pressure and Temperature Sensitive Paints written by Tianshu Liu and published by Springer Science & Business Media. This book was released on 2006-01-06 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Luminescent molecule sensors, called pressure-sensitive paint (PSP) and temperature-sensitive paint (TSP), measure factors essential for understanding the aerodynamic performance and heat transfer characteristics of flight vehicles. They provide a powerful tool for experimental aerodynamicists to obtain a deeper understanding of the rich physical phenomena in complex flows around a flight vehicle. This book helps the reader to understand the physics and chemistry and the capabilities of PSP and TSP. It provides an overview of the wide scope of applications and explains the system requirements for using these sensors. The book also includes an extensive table of properties of PTP and TSP. As such, it is a thorough and up-to-date coverage of the underlying physics and applications of luminescent molecules designed for global pressure and temperature mapping

Download or read book The Handbook of Lithium Ion Battery Pack Design written by John T. Warner and published by Elsevier. This book was released on 2024-05-14 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Lithium-Ion Battery Pack Design: Chemistry, Components, Types and Terminology,?Second Edition provides a clear and concise explanation of EV and Li-ion batteries for readers that are new to the field. The second edition expands and updates all topics covered in the original book, adding more details to all existing chapters and including major updates to align with all of the rapid changes the industry has experienced over the past few years. This handbook offers a layman's explanation of the history of vehicle electrification and battery technology, describing the various terminology and acronyms and explaining how to do simple calculations that can be used in determining basic battery sizing, capacity, voltage, and energy. By the end of this book the reader will have a solid understanding of the terminology around Li-ion batteries and be able to undertake simple battery calculations. The book is immensely useful to beginning and experienced engineers alike who are moving into the battery field. Li-ion batteries are one of the most unique systems in automobiles today in that they combine multiple engineering disciplines, yet most engineering programs focus on only a single engineering field. This book provides the reader with a reference to the history, terminology and design criteria needed to understand the Li-ion battery and to successfully lay out a new battery concept. Whether you are an electrical engineer, a mechanical engineer or a chemist, this book will help you better appreciate the inter-relationships between the various battery engineering fields that are required to understand the battery as an Energy Storage System. It gives great insights for readers ranging from engineers to sales, marketing, management, leadership, investors, and government officials. - Adds a brief history of battery technology and its evolution to current technologies? - Expands and updates the chemistry to include the latest types - Discusses thermal runaway and cascading failure mitigation technologies? - Expands and updates the descriptions of the battery module and pack components and systems?? - Adds description of the manufacturing processes for cells, modules, and packs? - Introduces and discusses new topics such as battery-as-a-service, cell to pack and cell to chassis designs, and wireless BMS?

Download or read book Low Speed Wind Tunnel Testing written by Jewel B. Barlow and published by John Wiley & Sons. This book was released on 1999-02-22 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: A brand-new edition of the classic guide on low-speed wind tunnel testing While great advances in theoretical and computational methods have been made in recent years, low-speed wind tunnel testing remains essential for obtaining the full range of data needed to guide detailed design decisions for many practical engineering problems. This long-awaited Third Edition of William H. Rae, Jr.'s landmark reference brings together essential information on all aspects of low-speed wind tunnel design, analysis, testing, and instrumentation in one easy-to-use resource. Written by authors who are among the most respected wind tunnel engineers in the world, this edition has been updated to address current topics and applications, and includes coverage of digital electronics, new instrumentation, video and photographic methods, pressure-sensitive paint, and liquid crystal-based measurement methods. The book is organized for quick access to topics of interest, and examines basic test techniques and objectives of modeling and testing aircraft designs in low-speed wind tunnels, as well as applications to fluid motion analysis, automobiles, marine vessels, buildings, bridges, and other structures subject to wind loading. Supplemented with real-world examples throughout, Low-Speed Wind Tunnel Testing, Third Edition is an indispensable resource for aerospace engineering students and professionals, engineers and researchers in the automotive industries, wind tunnel designers, architects, and others who need to get the most from low-speed wind tunnel technology and experiments in their work.

Download or read book Gas Turbine Blade Cooling written by Chaitanya D Ghodke and published by SAE International. This book was released on 2018-12-10 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas turbines play an extremely important role in fulfilling a variety of power needs and are mainly used for power generation and propulsion applications. The performance and efficiency of gas turbine engines are to a large extent dependent on turbine rotor inlet temperatures: typically, the hotter the better. In gas turbines, the combustion temperature and the fuel efficiency are limited by the heat transfer properties of the turbine blades. However, in pushing the limits of hot gas temperatures while preventing the melting of blade components in high-pressure turbines, the use of effective cooling technologies is critical. Increasing the turbine inlet temperature also increases heat transferred to the turbine blade, and it is possible that the operating temperature could reach far above permissible metal temperature. In such cases, insufficient cooling of turbine blades results in excessive thermal stress on the blades causing premature blade failure. This may bring hazards to the engine's safe operation. Gas Turbine Blade Cooling, edited by Dr. Chaitanya D. Ghodke, offers 10 handpicked SAE International's technical papers, which identify key aspects of turbine blade cooling and help readers understand how this process can improve the performance of turbine hardware.

Download or read book Advanced Automotive Fault Diagnosis written by Tom Denton and published by Routledge. This book was released on 2006-08-14 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diagnostics, or fault finding, is a fundamental part of an automotive technician's work, and as automotive systems become increasingly complex there is a greater need for good diagnostic skills. Advanced Automotive Fault Diagnosis is the only book to treat automotive diagnostics as a science rather than a check-list procedure. Each chapter includes basic principles and examples of a vehicle system followed by the appropriate diagnostic techniques, complete with useful diagrams, flow charts, case studies and self-assessment questions. The book will help new students develop diagnostic skills and help experienced technicians improve even further. This new edition is fully updated to the latest technological developments. Two new chapters have been added – On-board diagnostics and Oscilloscope diagnostics – and the coverage has been matched to the latest curricula of motor vehicle qualifications, including: IMI and C&G Technical Certificates and NVQs; Level 4 diagnostic units; BTEC National and Higher National qualifications from Edexcel; International Motor Vehicle qualifications such as C&G 3905; and ASE certification in the USA.

Download or read book Review of Radiologic Physics written by William Sensakovic and published by Lippincott Williams & Wilkins. This book was released on 2023-07-24 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a complete review for radiology residents and radiologic technologists preparing for certification, Review of Radiologic Physics, 5th Edition, by Dr. William F. Sensakovic, is a high-yield, efficient resource for today’s clinically focused exams. Now fully up to date, this edition covers x-ray production and interactions, projection and tomographic imaging, image quality, radiobiology, radiation protection, nuclear medicine, ultrasound, and magnetic resonance—all of the important physics information you need to understand the factors that improve or degrade image quality.

Download or read book Human Stem Cell Manual written by Suzanne Peterson and published by Academic Press. This book was released on 2012-10-22 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual is a comprehensive compilation of "methods that work" for deriving, characterizing, and differentiating hPSCs, written by the researchers who developed and tested the methods and use them every day in their laboratories. The manual is much more than a collection of recipes; it is intended to spark the interest of scientists in areas of stem cell biology that they may not have considered to be important to their work. The second edition of the Human Stem Cell Manual is an extraordinary laboratory guide for both experienced stem cell researchers and those just beginning to use stem cells in their work. - Offers a comprehensive guide for medical and biology researchers who want to use stem cells for basic research, disease modeling, drug development, and cell therapy applications - Provides a cohesive global view of the current state of stem cell research, with chapters written by pioneering stem cell researchers in Asia, Europe, and North America - Includes new chapters devoted to recently developed methods, such as iPSC technology, written by the scientists who made these breakthroughs

Download or read book The Physics of Semiconductor Devices written by R. K. Sharma and published by Springer. This book was released on 2019-01-31 with total page 1260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book disseminates the current knowledge of semiconductor physics and its applications across the scientific community. It is based on a biennial workshop that provides the participating research groups with a stimulating platform for interaction and collaboration with colleagues from the same scientific community. The book discusses the latest developments in the field of III-nitrides; materials & devices, compound semiconductors, VLSI technology, optoelectronics, sensors, photovoltaics, crystal growth, epitaxy and characterization, graphene and other 2D materials and organic semiconductors.

Download or read book High Performance Polymers and Engineering Plastics written by Vikas Mittal and published by John Wiley & Sons. This book was released on 2011-09-09 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes advances in synthesis, processing, and technology of environmentally friendly polymers generated from renewable resources. With contents based on a wide range of functional monomers and contributions from eminent researchers, this volume demonstrates the design, synthesis, properties and applications of plant oil based polymers, presenting an elaborate review of acid mediated polymerization techniques for the generation of green polymers. Chemical engineers are provided with state-of-the-art information that acts to further progress research in this direction.

Download or read book Emerging Technologies in Non Destructive Testing VI written by Danny Van Hemelrijck and published by CRC Press. This book was released on 2015-11-24 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Destructive Testing (NDT) is of worldwide significance, and is strongly related to the detection of damage in engineering structures (buildings, bridges, aircrafts, ships, pressure vessels, etc.) using non-invasive techniques (ultrasound, X-rays, Radar, neutrons, thermography, vibrations, acoustic emission, etc.). Emerging Technologies in Non-D

Download or read book Digital Image Processing for Medical Applications written by Geoff Dougherty and published by Cambridge University Press. This book was released on 2009 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hands-on text for a first course aimed at end-users, focusing on concepts, practical issues and problem solving.

Download or read book Sustainable Development for Energy Power and Propulsion written by Ashoke De and published by Springer Nature. This book was released on 2020-09-03 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises state-of-the-art advances in energy, combustion, power, propulsion, environment, focusing on the production and utilization of fossil fuels, alternative fuels and biofuels. It is written by internationally renowned experts who provide the latest fundamental and applied research innovations on cleaner energy production as well as utilization for a wide range of devices extending from micro scale energy conversion to hypersonic propulsion using hydrocarbon fuels. The tailored technical tracks and contributions are portrayed in the respective field to highlight different but complementary views on fuels, combustion, power and propulsion and air toxins with special focus on current and future R&D needs and activities. This book will serve as a useful reference for practicing engineers, research engineers and managers in industry and research labs, academic institutions, graduate students, and final year undergraduate students in mechanical, chemical, aerospace, energy, and environmental engineering.

Download or read book Status of Fast Reactor Research and Technology Development written by International Atomic Energy Agency and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Based on a recommendation from the Technical Working Group on Fast Reactors, this publication is a regular update of previous publications on fast reactor technology. The publication provides comprehensive and detailed information on the technology of fast neutron reactors. The focus is on practical issues that are useful to engineers, scientists, managers, university students and professors. The main issues of discussion are experience in design, construction, operation and decommissioning, various areas of research and development, engineering, safety and national strategies, and public acceptance of fast reactors. In the summary the reader will find national strategies, international initiatives on innovative (i.e. Generation IV) systems and an assessment of public acceptance as related to fast reactors."--Résumé de l'éditeur.

Download or read book Shock Wave Boundary Layer Interactions written by Holger Babinsky and published by Cambridge University Press. This book was released on 2011-09-12 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shock wave-boundary-layer interaction (SBLI) is a fundamental phenomenon in gas dynamics that is observed in many practical situations, ranging from transonic aircraft wings to hypersonic vehicles and engines. SBLIs have the potential to pose serious problems in a flowfield; hence they often prove to be a critical - or even design limiting - issue for many aerospace applications. This is the first book devoted solely to a comprehensive, state-of-the-art explanation of this phenomenon. It includes a description of the basic fluid mechanics of SBLIs plus contributions from leading international experts who share their insight into their physics and the impact they have in practical flow situations. This book is for practitioners and graduate students in aerodynamics who wish to familiarize themselves with all aspects of SBLI flows. It is a valuable resource for specialists because it compiles experimental, computational and theoretical knowledge in one place.

Download or read book Practical Nuclear Medicine written by Peter F. Sharp and published by Springer Science & Business Media. This book was released on 2005-09-30 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an essential guide for all practitioners. The emphasis throughout is on the practice of nuclear medicine. Primarily aimed at the radiologist, physician, physicist or technologist starting in nuclear medicine, it will also appeal to more experienced practitioners who are keen to stay up-to-date. The practical approach with tables as "recipes" for acquisition protocols means it is essential for any departmental shelf. 3rd edition expanded - now covering areas of development in nuclear medicine, such as PET and other methods of tumour imaging, data processing. All illustrations are up-to-date to reflect current standards of image quality.