Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing. house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 25 (thesis year 1980) a total of 10,308 theses titles from 27 Canadian and 214 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 25 reports theses submitted in 1980, on occasion, certain universities do report theses submitted in previous years but not reported at the time.
Download or read book Deep Foundations on Bored and Auger Piles BAP III written by W. Haegeman and published by CRC Press. This book was released on 2020-09-29 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents findings from the 3rd International Geotechnical Seminar, held in Ghent, Belgium. Topics include: American experiences with large diameter bored piles; case histories; static, dynamic and pile integrity testing; and installation parameters and capacity of screwed piles.
Download or read book Canadian Geotechnical Journal written by and published by . This book was released on 2007 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory and Practice of Pile Foundations written by Wei Dong Guo and published by CRC Press. This book was released on 2012-11-14 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pile Foundations are an essential basis for many structures. It is vital that they be designed with the utmost reliability, because the cost of failure is potentially huge. Covering a whole range of design issues relating to pile design, this book presents economical and efficient design solutions and demonstrates them using real world examples. Co
Download or read book Stability and Performance of Slopes and Embankments II written by Raymond Bolton Seed and published by . This book was released on 1992 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Conference on Pipelines in Adverse Environments II written by Mark B. Pickell and published by . This book was released on 1983 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deep Foundations 2002 written by Michael W. O'Neill and published by American Society of Civil Engineers. This book was released on 2002 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the International Deep Foundations Congress 2002, held in Orlando, Florida, February 14-16, 2002. Sponsored by The Geo-Institute of ASCE. This Geotechnical Special Publication contains 110 papers documenting applied research and engineering experience in the area of deep foundations. The volume is a comprehensive resource for both researchers and practitioners covering driven, jacked, and augered piles and drilled shafts. Topics include: geotechnical design, structural design, innovative construction, validation and verification of design and construction, soil-structure interaction, reliability-based design, field load testing for design, concepts for deep foundation systems (such as piled rafts), numerical and analytical modeling of pile foundations, design of foundations for extreme events, and numerous and varied case histories. Several papers also focus on the acquisition and use of geomaterial properties for deep foundation design and the use of deep foundations in walls.
Download or read book Research on Transportation Facilities in Cold Regions written by Orlando B. Andersland and published by . This book was released on 1986 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.
Download or read book Basics of Foundation Design written by Bengt Fellenius and published by Lulu.com. This book was released on 2017-03-17 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "Red Book" presents a background to conventional foundation analysis and design. The text is not intended to replace the much more comprehensive 'standard' textbooks, but rather to support and augment these in a few important areas, supplying methods applicable to practical cases handled daily by practising engineers and providing the basic soil mechanics background to those methods. It concentrates on the static design for stationary foundation conditions. Although the topic is far from exhaustively treated, it does intend to present most of the basic material needed for a practising engineer involved in routine geotechnical design, as well as provide the tools for an engineering student to approach and solve common geotechnical design problems.
Download or read book Tall Building Foundation Design written by Harry G. Poulos and published by CRC Press. This book was released on 2017-07-20 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guide to the design of foundations for tall buildings. After a general review of the characteristics of tall buildings, various foundation options are discussed followed by the general principles of foundation design as applied to tall buildings. Considerable attention is paid to the methods of assessment of the geotechnical design parameters, as this is a critical component of the design process. A detailed treatment is then given to foundation design for various conditions, including ultimate stability, serviceability, ground movements, dynamic loadings and seismic loadings. Basement wall design is also addressed. The last part of the book deals with pile load testing and foundation performance measurement, and finally, the description of a number of case histories. A feature of the book is the emphasis it places on the various stages of foundation design: preliminary, detailed and final, and the presentation of a number of relevant methods of design associated with each stage.
Download or read book Rock socketed Shafts for Highway Structure Foundations written by John P. Turner and published by Transportation Research Board. This book was released on 2006 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 360: Rock-Socketed Shafts for Highway Structure Foundations explores current practices pertaining to each step of the design process, along with the limitations; identifies emerging and promising technologies; examines the principal challenges in advancing the state of the practice; and investigates future developments and potential improvements in the use and design of rock-socketed shafts.
Download or read book Pile Design and Construction Practice Fifth Edition written by Michael Tomlinson and published by CRC Press. This book was released on 2007-12-06 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile groups under compressive loading, piled foundations for resisting uplift and lateral loading and the structural design of piles and pile groups. Marine structures, miscellaneous problems (including machinery foundations, underpinning, mining subsidence areas, contracts and frozen ground), durability of piled foundations, ground investigations, and pile testing are also covered. It introduces the 2005 version of Eurocode7, BS 8004 and other codes, and refers to BS 6349 on maritime structures, and new forms of civil engineering contracts suitable for piling projects. It includes numerous worked examples to the codes, many based on actual problems. It also gives very comprehensive information for students.
Download or read book Piles in Weak Rock written by and published by Thomas Telford. This book was released on 1977 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Single Piles and Pile Groups Under Lateral Loading written by Lymon C. Reese and published by CRC Press. This book was released on 2010-12-15 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complexities of designing piles for lateral loads are manifold as there are many forces that are critical to the design of big structures such as bridges, offshore and waterfront structures and retaining walls. The loads on structures should be supported either horizontally or laterally or in both directions and most structures have in common t
Download or read book Geotechnical Engineering for Transportation Projects written by American Society of Civil Engineers. Geo-Institute and published by . This book was released on 2004 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: GSP 126 contains 223 papers presented at Geo-Trans 2004, held in Los Angeles, California, July 27-31, 2004.
Download or read book Theory and Practice of Pile Foundations written by Wei Dong Guo and published by CRC Press. This book was released on 2012-11-14 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pile Foundations are an essential basis for many structures. It is vital that they be designed with the utmost reliability, because the cost of failure is potentially huge. Covering a whole range of design issues relating to pile design, this book presents economical and efficient design solutions and demonstrates them using real world examples. Coverage includes nonlinear response of single piles to vertical or torsional loading and to cyclic lateral loading, as well as prediction of nonlinear response of lateral pile groups, vertically loaded pile groups and the design of slope stabilising piles. Most solutions are provided as closed-form expressions. Theory and Practice of Pile Foundations is: illustrated with case studies accompanied by practical applications in Excel and MathCad the first book to incorporate nonlinear interaction into pile design. A valuable resource for students of geotechnical engineering taking courses in foundations and a vital tool for engineers designing pile foundations.
