Download or read book Field Emission Properties of Carbon Thin Films and Carbon Nanotubes written by Oliver Gröning and published by . This book was released on 1999 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthesis and Field Emission Properties of Carbon Nanotube Films written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In this study, vertically aligned multiwalled carbon nanotube films were grown by microwave plasma chemical vapor deposition (MWCVD). Through controlling the thickness of the iron thin film, carbon nanotubes with different diameters were obtained. When the thickness of the iron layer was reduced to 0.3-0.5 nm, single-wall and double-wall nanotubes were obtained with a high areal density (~ 1012/cm2) and vertical alignment. Scanning electron microscopy, Raman spectroscopy and high resolution transmission electron microscopy were employed to characterize the as-deposited nanotubes. In addition, a systematic study of the internal structure transition of the carbon nanotubes has been conducted and a growth model was proposed in terms of carbon surface and bulk diffusion. The field emission of the carbon nanotube films has also been explored in this study. Different measurement systems including a variable distance field emission system, a field emission imaging system, and a field electron emission system (FEEM) were employed. The effects of the diameter (multi-wall vs single- and double- wall), the adsorbates, and the temperature on the field emission properties of carbon nanotubes have been exhibited. Finally, two processes including hydrogen plasma etching and re-growth were used to treat the as-deposited film, and an increased emission site density was observed for the re-grown carbon nanotube film.
Download or read book Carbon Nanotube and Related Field Emitters written by Yahachi Saito and published by John Wiley & Sons. This book was released on 2010-10-01 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) have novel properties that make them potentially useful in many applications in nanotechnology, electronics, optics and other fields of materials science. These characteristics include extraordinary strength, unique electrical properties, and the fact that they are efficient heat conductors. Field emission is the emission of electrons from the surface of a condensed phase into another phase due to the presence of high electric fields. CNT field emitters are expected to make a breakthrough in the development of field emission display technology and enable miniature X-ray sources that will find a wide variety of applications in electronic devices, industry, and medical and security examinations. This first monograph on the topic covers all aspects in a concise yet comprehensive manner - from the fundamentals to applications. Divided into four sections, the first part discusses the preparation and characterization of carbon nanotubes, while part two is devoted to the field emission properties of carbon nanotubes, including the electron emission mechanism, characteristics of CNT electron sources, and dynamic behavior of CNTs during operation. Part three highlights field emission from other nanomaterials, such as carbon nanowalls, diamond, and silicon and zinc oxide nanowires, before concluding with frontier R&D applications of CNT emitters, from vacuum electronic devices such as field emission displays, to electron sources in electron microscopes, X-ray sources, and microwave amplifiers. Edited by a pioneer in the field, each chapter is written by recognized experts in the respective fields.
Download or read book Carbon Nanotubes written by Mohammed Rahman and published by BoD – Books on Demand. This book was released on 2018-04-26 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Carbon Nanotubes - Recent Progress contains a number of recent researches on synthesis, growth, characterization, development, and potential applications on carbon materials especially CNTs in nanoscale. It is a promising novel research from top to bottom that has received a lot of interest in the last few decades. It covers the advanced topics on the physical, chemical, and potential applications of CNTs. Here, the interesting reports on cutting-edge science and technology related to synthesis, morphology, control, hybridization, and prospective applications of CNTs are concluded. This potentially unique work offers various approaches on the R
Download or read book Characterization of Carbon Nanotube Based Thin Film Field Emitter written by Niraj Sinha and published by . This book was released on 2008 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, carbon nanotubes (CNTs) have emerged as one of the best field emitters for a variety of technological applications. The field emitting cathodes have several advantages over the conventional thermionic cathodes: (i) current density from field emission would be orders of magnitude greater than in the thermionic case, (ii) a cold cathode would minimize the need for cooling, and (iii) a field emitting cathode can be miniaturized. In spite of good performance of such cathodes, the procedure to estimate the device current is not straight forward and the required insight towards design optimization is not well understood. In addition, the current in CNT-based thin film devices shows fluctuation. Such fluctuation in field emission current is not desirable for many biomedical applications such as x-ray devices. The CNTs in a thin film undergo complex dynamics during field emission, which includes processes such as (i) evolution, (ii) electromechanical interaction, (iii) thermoelectric heating, (iv) ballistic transport, and (v) electron gas flow. These processes are coupled and nonlinear. Therefore, they must be analyzed accurately from the stability and long-term performance point of view. In this research, we develop detailed physics-based models of CNTs considering the aspects mentioned above.
Download or read book Microscopic Characterization of Electron Field Emission from Carbon Nanotubes and Carbon Thin film Electron Emitters written by Lars-Ola Nilsson and published by . This book was released on 2001 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanotubes written by Jose Mauricio Marulanda and published by BoD – Books on Demand. This book was released on 2011-08-01 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs), discovered in 1991, have been a subject of intensive research for a wide range of applications. In the past decades, although carbon nanotubes have undergone massive research, considering the success of silicon, it has, nonetheless, been difficult to appreciate the potential influence of carbon nanotubes in current technology. The main objective of this book is therefore to give a wide variety of possible applications of carbon nanotubes in many industries related to electron device technology. This should allow the user to better appreciate the potential of these innovating nanometer sized materials. Readers of this book should have a good background on electron devices and semiconductor device physics as this book presents excellent results on possible device applications of carbon nanotubes. This book begins with an analysis on fabrication techniques, followed by a study on current models, and it presents a significant amount of work on different devices and applications available to current technology.
Download or read book Nanotube Superfiber Materials written by Mark Schulz and published by William Andrew. This book was released on 2013-09-16 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotube Superfiber Materials refers to different forms of macroscale materials with unique properties constructed from carbon nanotubes. These materials include nanotube arrays, ribbons, scrolls, yarn, braid, and sheets. Nanotube materials are in the early stage of development and this is the first dedicated book on the subject. Transitioning from molecules to materials is a breakthrough that will positively impact almost all industries and areas of society. Key properties of superfiber materials are high flexibility and fatigue resistance, high energy absorption, high strength, good electrical conductivity, high maximum current density, reduced skin and proximity effects, high thermal conductivity, lightweight, good field emission, piezoresistive, magnetoresistive, thermoelectric, and other properties. These properties will open up the door to dozens of applications including replacing copper wire for power conduction, EMI shielding, coax cable, carbon biofiber, bullet-proof vests, impact resistant glass, wearable antennas, biomedical microdevices, biosensors, self-sensing composites, supercapacitors, superinductors, hybrid superconductor, reinforced elastomers, nerve scaffolding, energy storage, and many others. The scope of the book covers three main areas: Part I: Processing; Part II: Properties; and Part III: Applications. Processing involves nanotube synthesis and macro scale material formation methods. Properties covers the mechanical, electrical, chemical and other properties of nanotubes and macroscale materials. Different approaches to growing high quality long nanotubes and spinning the nanotubes into yarn are explained in detail. The best ideas are collected from all around the world including commercial approaches. Applications of nanotube superfiber cover a huge field and provides a broad survey of uses. The book gives a broad overview starting from bioelectronics to carbon industrial machines. - First book to explore the production and applications of macro-scale materials made from nano-scale particles - Sets out the processes for producing macro-scale materials from carbon nanotubes, and describes the unique properties of these materials - Potential applications for CNT fiber/yarn include replacing copper wire for power conduction, EMI shielding, coax cable, carbon biofiber, bullet-proof vests, impact resistant glass, wearable antennas, biomedical microdevices, biosensors, self-sensing composites, supercapacitors, superinductors, hybrid superconductor, reinforced elastomers, nerve scaffolding, energy storage, and many others
Download or read book Enhanced Field Emission Properties from Carbon Nanotube Emitters Grown on NiCr Alloy Surfaces with Grain Boundary Effect written by and published by . This book was released on 2008 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) are known to have exceptional field emission properties such as low turn-on voltage and high current density. Nilsson et al. reported that field emission properties depend highly on the density of the CNT films. The CNTs must have low density in order to minimize electrostatic field screening from neighboring nanotubes. At the same time, the CNT films must have a high number of emitting sites to achieve a desirable current density. Recently, the direct growth of CNTs on metal alloys containing Ni, Cr, and Fe has been shown to be an attractive alternative for fabrication of CNT emitters without requiring a metal catalyst deposition step. Herein, we report the field emission properties of multi-walled carbon nanotube (MWNT) films grown on polished smooth 80/20 and 70/30 NiCr surfaces by thermal chemical vapor deposition. We show that 80/20 NiCr surfaces prohibit growth of MWNTs at the grain boundaries resulting in a lower turn-on field in comparison to a continuous MWNT film obtained with 70/30 NiCr substrates.
Download or read book Characterization of the Field Emission Properties of Carbon Nanotubes Formed on Silicon Carbide Substrates by Surface Decomposition written by and published by . This book was released on 2006 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dense arrays of vertically aligned carbon nanotubes (CNTs) form on the surface of silicon carbide wafers during high temperature anneals under moderate vacuum conditions. The novelty of this growth method is that the CNTs form without the aid of a metal catalyst, allowing for potentially impurity-free CNTs to form. In this study, CNT films were grown by the surface decomposition of silicon carbide substrates. The associated field emission characteristics were investigated to determine if films grown using this method possessed advantages over films grown using metal-catalyzed methods. The associated turn-on and threshold voltages, maximum current density, and emission current stability of the CNT films were measured using a standard vacuum tube diode test configuration. Although the samples tested did not demonstrate improved field emission characteristics when compared to values found in the literature for catalyst-grown CNT films, the data collected compares well with data in the literature and shows that further investigation is warranted regarding the emission capabilities of CNT films formed on SiC by surface decomposition. From the measured CNT data, the lowest turn-on electric field was found to be lower than 3.0 V/micrometers, while exhibiting a high maximum current density of 4.25 mA/sq cm at 6.7 V/micrometers.
Download or read book Characterization of the Field Emission Properties of Carbon Nanotube Films Formed on Silicon Carbide Substrates by Surface Decomposition written by Michael C. Pochet and published by . This book was released on 2006 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Thin Film Triode Type Carbon Nanotube Field Electron Emission Cathode written by Graham Patrick Sanborn and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The current technological age is embodied by a constant push for increased performance and efficiency of electronic devices. This push is particularly observable for technologies that comprise free electron sources, which are used in various technologies including electronic displays, x-ray sources, telecommunication equipment, and spacecraft propulsion. Performance of these systems can be increased by reducing weight and power consumption, but is often limited by a bulky electron source with a high energy demand. Carbon nanotubes (CNTs) show favorable properties for field electron emission (FE) and performance as electron sources. This dissertation details the developments of a uniquely designed Spindt type CNT field emission array (CFEA), from initial concept to working prototype, to specifically prevent electrical shorting of the gate. The CFEA is patent pending in the United States. Process development enabled fabrication of a CFEA with a yield of up to 82%. Furthermore, a novel oxygen plasma etch process was developed to reverse shorting after CNT synthesis. CFEA testing demonstrates FE with a current density of up to 293 Î1/4A/cmÂ2 at the anode and 1.68 mA/cmÂ2 at the gate, with lifetimes in excess of 100 hours. A detailed analysis of eighty tested CFEAs revealed three distinct types of damage. Surprisingly, about half of the damaged chips are not electrically shorted, indicating that the CFEAs are very robust. Potential applications of this technology as cathodes for spacecraft electric propulsion were explored. Exposure to an operating electric propulsion thruster showed no significant effect or damage to the CFEAs, marking the first experimental study of CNT field emitters in an electric propulsion environment. A second effort in spacecraft propulsion is a collaboration with the Air Force Institute of Technology (AFIT). CFEAs are the payload on an AFIT developed Cube Satellite, called ALICE, to test electron emission in the space environment. ALICE has passed flight tests and is awaiting launch scheduled for 5 December 2013.
Download or read book Risk Management Resources written by and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Amorphous and Nanostructured Carbon Volume 593 written by J. P. Sullivan and published by . This book was released on 2000-07-05 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been tremendous development in the science of carbon in past years. First came the development of the chemical vapor deposition of diamond, followed by the discovery of a new class of molecules - the fullerenes. Carbon nanotubes were discovered and techniques were developed to deposit new phases of amorphous carbon containing mainly sp3 bonding. This book brings together scientists and engineers from all areas of carbon research, both sp2 and sp3 bonded, from the fully amorphous to nanostructured carbon, to the highly ordered nanotubes. It covers a range of subjects including the synthesis and properties of nanotubes, as well as diamond-like carbon deposition and properties. Applications range from nanotubes for hydrogen storage, to electrochemical double-layer capacitors (supercapacitors), field emission displays, hard coatings, and carbon coatings for magnetic storage technology. The book deals with the growth, characterization, properties and applications of nanotubes and field emission from all varieties of carbon, amorphous and diamond-like carbon- growth, properties and applications. It also contains papers on diamond, silicon carbide, carbon nitride and beryllium films.
Download or read book Carbon Nanotubes written by Stephanie Reich and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes are exceptionally interesting from a fundamental research point of view. Many concepts of one-dimensional physics have been verified experimentally such as electron and phonon confinement or the one-dimensional singularities in the density of states; other 1D signatures are still under debate, such as Luttinger-liquid behavior. Carbon nanotubes are chemically stable, mechanically very strong, and conduct electricity. For this reason, they open up new perspectives for various applications, such as nano-transistors in circuits, field-emission displays, artificial muscles, or added reinforcements in alloys. This text is an introduction to the physical concepts needed for investigating carbon nanotubes and other one-dimensional solid-state systems. Written for a wide scientific readership, each chapter consists of an instructive approach to the topic and sustainable ideas for solutions. The former is generally comprehensible for physicists and chemists, while the latter enable the reader to work towards the state of the art in that area. The book gives for the first time a combined theoretical and experimental description of topics like luminescence of carbon nanotubes, Raman scattering, or transport measurements. The theoretical concepts discussed range from the tight-binding approximation, which can be followed by pencil and paper, to first-principles simulations. We emphasize a comprehensive theoretical and experimental understanding of carbon nanotubes including - general concepts for one-dimensional systems - an introduction to the symmetry of nanotubes - textbook models of nanotubes as narrow cylinders - a combination of ab-initio calculations and experiments - luminescence excitation spectroscopy linked to Raman spectroscopy - an introduction to the 1D-transport properties of nanotubes - effects of bundling on the electronic and vibrational properties and - resonance Raman scattering in nanotubes.
Download or read book Carbon Nanotubes written by Michael J. O’Connell and published by CRC Press. This book was released on 2018-10-03 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery more than a decade ago, carbon nanotubes (CNTs) have held scientists and engineers in captive fascination, seated on the verge of enormous breakthroughs in areas such as medicine, electronics, and materials science, to name but a few. Taking a broad look at CNTs and the tools used to study them, Carbon Nanotubes: Properties and Applications comprises the efforts of leading nanotube researchers led by Michael O’Connell, protégé of the late father of nanotechnology, Richard Smalley. Each chapter is a self-contained treatise on various aspects of CNT synthesis, characterization, modification, and applications. The book opens with a general introduction to the basic characteristics and the history of CNTs, followed by discussions on synthesis methods and the growth of “peapod” structures. Coverage then moves to electronic properties and band structures of single-wall nanotubes (SWNTs), magnetic properties, Raman spectroscopy of electronic and chemical behavior, and electromechanical properties and applications in NEMS (nanoelectromechanical systems). Turning to applications, the final sections of the book explore mechanical properties of SWNTs spun into fibers, sidewall functionalization in composites, and using SWNTs as tips for scanning probe microscopes. Taking a fresh look at this burgeoning field, Carbon Nanotubes: Properties and Applications points the way toward making CNTs commercially viable.
Download or read book Carbon Nanotubes written by M. Meyyappan and published by CRC Press. This book was released on 2004-07-28 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes, with their extraordinary mechanical and unique electronic properties, have garnered much attention in the past five years. With a broad range of potential applications including nanoelectronics, composites, chemical sensors, biosensors, microscopy, nanoelectromechanical systems, and many more, the scientific community is more moti
