Download or read book Metal Matrix Composites written by Nikhilesh Chawla and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few years, a significant increase in applications of MMCs has taken place, particularly in the areas of automotive, aerospace, electronics, and recreation. These include continuous fiber reinforced MMCs for cables in power transmission, high temperature superconducting wires, particulate MMCs in civilian aircraft and automotive applications, and high volume fraction, high thermal conductivity substrates for electronic packaging. Nevertheless, as with any novel material systems, there is a lack of fundamental understanding on the part of practicing engineers and designers. This book would seek to address these issues, in a thorough and cohesive manner, as well as to provide students and scientists with a basic understanding of MMCs. This book will emphasize the synergistic relationships among processing, structure, and properties of metal matrix composites.

Download or read book Metal Matrix Composites written by Minoru Taya and published by Elsevier. This book was released on 2016-01-11 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Matrix Composites: Thermomechanical Behavior discusses metal matrix composites, elaborating on that consists of two phases—fiber as reinforcement and metal as matrix. This book focuses on polymer matrix composites, including topics in metal matrix composites ranging from processing to fracture mechanics. The three basic types of composite materials—dispersion-strengthened, particle-reinforced, and fiber (whisker)-reinforced, are also described in detail. Dispersion-strengthened is characterized by a microstructure consisting of an elemental matrix within which fine particles are uniformly dispersed, while particle-reinforced is indicated by dispersed particles of greater than 1.0 μm diameter with a volume fraction of 5 to 40%. Fiber (whisker)-reinforced provides a distinguishing microstructural feature of fiber-reinforced materials, such as that the reinforcing fiber has one long dimension, while the reinforcing particles of the other two types do not. This publication serves as a reference data book to students and researchers aiming to acquire knowledge of the thermomechanical behavior of metal matrix composites.

Download or read book An Introduction to Metal Matrix Composites written by T. W. Clyne and published by Cambridge University Press. This book was released on 1993 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal matrix composites constitute a new class of materials, now starting to make a major industrial impact in fields as diverse as aerospace, automotives and electronics. This book gives a comprehensive, integrated coverage of these materials, including the background to analytical-, experimental-, production and application-oriented aspects. Clear pictorial descriptions are given of the basic principles governing various properties and characteristics; these encompass mechanical, thermal, electrical, environmental and wear behaviour. Coverage also extends to material processing and component fabrication aspects and to a survey of commercial usage. This book is aimed primarily at scientists, engineers, production managers and all those involved in research on new materials in general, and metal matrix composites in particular, but may also be suitable for use as a text in beginning graduate and advanced undergraduate courses.

Download or read book Metal Matrix Composites in Industry written by Alexander Evans and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal matrix composites are making tangible inroads into the "real" world of engineering. They are used in engineering components such as brake rotors, aircraft parts, combustion engines, and heat sinks for electronic systems. Yet, outside a relatively limited circle of specialists, these materials are mostly unknown. Designers do not as a rule think of using these materials, in part because access to information is difficult as these materials have not really entered engineering handbooks. Metal Matrix Composites in Industry is thus useful to engineers who wish to gain introductory knowledge of these materials and who want to know where "to find" them. Additionally, it provides researchers and academics with a survey of current industrial activity in this area of technology.

Download or read book Metal Matrix Composites written by Karl U. Kainer and published by John Wiley & Sons. This book was released on 2006-08-21 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the properties of MMCs can be directly designed "into" the material, they can fulfill all the demands set by design engineers. This book surveys the latest results and development possibilities for MMCs as engineering and functional materials, making it of utmost value to all materials scientists and engineers seeking in-depth background information on the potentials these materials have to offer in research, development and design engineering.

Download or read book Metal Matrix Composites written by C.T. Lynch and published by CRC Press. This book was released on 2018-01-18 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of reinforcing a material by the use of a fiber is not a new one. The Egyptian brick layer employed the same principle more than three thousand years ago when straw was incorporated into the bricks. More recent examples of fiber reinforced composites are steel-reinforced concrete, nylon and rayon cord reinforced tires, and fiberglass reinforced plastics. In the last several years considerable progress has been made on new composite structures particularly utilizing boron (on tungsten substrate) fibers in various matrices. Many of these advances have been reviewed recently by P. M. Sinclair1 and by Alexander, Shaver, and Withers.2 An excellent earlier survey is available by Rauch Sutton, and McCreight.3 Boron-reinforced epoxy composites are being fabricated and tested as jet engine components, fuselage components, and even as a complete aircraft wing because of the tremendous gain in experimentally demonstrated properties such as modulus, strength, and fatigue resistance, particularly on a weight normalized (e.g., strength/density) basis. Other than glass/epoxy and boron/ epoxy composites and perhaps boron/aluminum, the systems now under study are in the early stages of research and development. These include other boron/metal composites, graphite/polymer, graphite/metal, graphite/graphite, alumina/metal, and aligned eutectic (directionally, solidified) combinations. As Sinclair points out, designers are wary about filamentary composites becausethere is little background information and scant experience.

Download or read book Metal Matrix Composites by Friction Stir Processing written by Ranjit Bauri and published by Butterworth-Heinemann. This book was released on 2017-08-10 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Matrix Composites by Friction Stir Processing discusses the capabilities of utilizing friction stir processing (FSP) as a tool to manufacture new materials, such as composites. FSP is considered a tool for grain refinement. However, this work illustrates how FSP has a wider capability due to the material flow and mixing the process offers. This book highlights such aspects by demonstrating the ability of the process to incorporate a second phase and make metal matrix composites (MMCs). The book covers the current research on processing MMCs by FSP, and presents a novel approach of making ductile MMCs by FSP using metal particle reinforcements. - Demonstrates how friction stir processing can be used to make metal matrix composites - Includes a review of different approaches of making metal matrix composites by friction stir processing - Demonstrates the utility of friction stir processing in making new types of non-equilibrium ductile composites - Provides a comparison of properties of friction stir processed composites to those of conventional metal matrix composites

Download or read book Metal Reinforced Ceramics written by Andrew J. Ruys and published by Woodhead Publishing. This book was released on 2020-11-07 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal-Reinforced Ceramics covers the principle of metal-fiber-reinforced ceramics, a well-known topic in the field of reinforced concrete. Much of the work that has been done has remained unpublished, hidden in industrial company archives due to the commercial sensitivity associated with the respective technologies that prevailed at the time, which no longer applies today. This book will discuss advanced technologies that have largely been undocumented before in a broad range of industrial application areas, with updates on alumina, silicon carbide, boron carbide, tungsten carbide, fused silica, and carbon-based ceramics which are hard, heat resistant, wear resistant, and chemically durable. - Provides detailed information on fundamental principles, advanced processing technologies and industrial applications - Features comprehensive industrial knowledge not usually in the public domain from the author's experience spanning more than three decades - Features armor ceramics, bioceramics, aerospace, mining and architectural ceramic applications

Download or read book Metal Matrix Composites written by Antonio Contreras Cuevas and published by Springer. This book was released on 2018-10-27 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers several aspects of the synthesis of composites by the pressureless infiltration technique. It describes the methods used to obtain green preforms, such as cold pressed and hot sintering, describing the heating time, load, and time required for pressing the preforms. Additionally, wettability phenomena, which is directly related on infiltration, is extensively described. Wettability process and interfacial reactions are analyzed in many ceramic-metal systems prior to fabricate the composites. A complete description of fabrication processes for Metal Matrix Composites is included. An extensive section on structural, chemical, and mechanical characterization of composites fabricated with aluminum and magnesium alloys as matrices reinforced with titanium carbide (TiC), aluminum nitride (AlN), silicon carbide (SiC) and alumina (Al2O3) is included. Relevant techniques for joining composites, such as welding and brazing are addressed. As well as issues pertaining to the corrosion and wear of composites are discussed as well. Corrosion behavior of some composites exposed to aqueous media was analyzed. Corrosion of composites using TiC and SiC like reinforcement and Al, Ni, and some Al-Cux, Al-Mgx and Al-Cu-Li alloys like matrix is discussed extensively. The structural characterization techniques addressed include: scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), optical microscopy (OM), differential thermal analysis (DTA), high resolution transmission electron microscopy (HRTEM), and thermogravimetry analysis (TGA). Mechanical testing including hardness, elastic modulus, tension tests, and impact tests were used in the characterization of composites. Theoretical models for prediction of some mechanical properties are included too.

Download or read book Metal and Ceramic Matrix Composites written by Brian Cantor and published by CRC Press. This book was released on 2003-11-01 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from leading experts in their respective fields, Metal and Ceramic Matrix Composites provides a comprehensive overview of topics on specific materials and trends. It is a subject regularly included as a final year option in materials science courses and is also of much industrial and academic interest. The book begins wit

Download or read book Machining of Metal Matrix Composites written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2011-09-18 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining of Metal Matrix Composites provides the fundamentals and recent advances in the study of machining of metal matrix composites (MMCs). Each chapter is written by an international expert in this important field of research. Machining of Metal Matrix Composites gives the reader information on machining of MMCs with a special emphasis on aluminium matrix composites. Chapter 1 provides the mechanics and modelling of chip formation for traditional machining processes. Chapter 2 is dedicated to surface integrity when machining MMCs. Chapter 3 describes the machinability aspects of MMCs. Chapter 4 contains information on traditional machining processes and Chapter 5 is dedicated to the grinding of MMCs. Chapter 6 describes the dry cutting of MMCs with SiC particulate reinforcement. Finally, Chapter 7 is dedicated to computational methods and optimization in the machining of MMCs. Machining of Metal Matrix Composites can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing and mechanical engineers, and professionals involved with MMC applications. It can also be used to teach modern manufacturing engineering or as a textbook for advanced undergraduate and postgraduate engineering courses in machining, manufacturing or materials.

Download or read book Structural Composite Materials written by F. C. Campbell and published by ASM International. This book was released on 2010-01-01 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with all aspects of advanced composite materials; what they are, where they are used, how they are made, their properties, how they are designed and analyzed, and how they perform in-service. It covers both continuous and discontinuous fiber composites fabricated from polymer, metal, and ceramic matrices, with an emphasis on continuous fiber polymer matrix composites.

Download or read book Carbon Nanotubes written by Andy Nieto and published by CRC Press. This book was released on 2021-05-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This discovery of carbon nanotubes (CNT) three decades ago ushered in the technological era of nanotechnology. Among the most widely studied areas of CNT research is their use as structural reinforcements in composites. This book describes the development of CNT reinforced metal matrix composites (CNT-MMCs) over the last two decades. The field of CNT-MMCs is abundant in fundamental science, rich in engineering challenges and innovations and ripe for technological maturation and commercialization. The authors have sought to present the current state of the-art in CNT-MMC technology from their synthesis to their myriad potential end-use applications. Specifically, topics explored include: • Advantages, limitations, and evolution of processing techniques used to synthesize and fabricate CNT-MMCs • Emphasizes dispersion techniques of CNTs in metallic systems, a key challenge to the successful and widespread implementation of CNT-MMCs. Methods for quantification and improved control of CNT distributions are presented • Methods for quantification and improved control of CNT distributions are presented • Characterization techniques uniquely suited for charactering these nanoscale materials and their many chemical and physical interactions with the metal matrix, including real-time in-situ characterization of deformation mechanisms • Electron microscope images from premier studies enrich discussions on micro-mechanical modeling, interfacial design, mechanical behavior, and functional properties • A chapter is dedicated to the emergence of dual reinforcement composites that seek to enhance the efficacy of CNTs and lead to material properties by design This book highlights seminal findings in CNT-MMC research and includes several tables listing processing methods, associated CNT states, and resulting properties in order to aid the next generation of researchers in advancing the science and engineering of CNT-MMCs. In addition, a survey of the patent literature is presented in order to shed light on what the first wave of CNT-MMC commercialization may look like and the challenges that will have to be overcome, both technologically and commercially.

Download or read book Fundamentals of Metal Matrix Composites written by Subra Suresh and published by Elsevier. This book was released on 2013-10-22 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: `Metal-Matrix Composites' are being used or considered for use in a variety of applications in the automotive, aerospace and sporting goods industries. This book contains sixteen chapters, all written by leading experts in the filed, which focus on the processing, microstructure and characterization, mechanics and micromechanics of deformation, mechanics and micromechanics of damage and fracture, and practical applications of a wide variety of metal composites.A particularly noteworthy feature of this authoritative volume is its collection of state-of-the-art reviews of the relationships among processing, microstructural evolution, micromechanics of deformation and overall mechanical response.

Download or read book Fundamentals of Fibre Reinforced Composite Materials written by A.R. Bunsell and published by CRC Press. This book was released on 2005-06-15 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber reinforced composite materials encompass a wide range of material classes from reinforced glasses, plastics, and rubbers through to more recently developed metals and ceramics. Fundamentals of Fibre Reinforced Composite Materials is a comprehensive and authoritative book that introduces the topic with a brief history of composite development, a review of composite applications, the types of fibre used, and their respective indiviual properties. An entire chapter considers organic matrices and their behavior, reviewing all of the most commonly encountered polymer matrix systems. Composite manufacturing techniques are then discussed, including those methods employed in the production of advanced metal and ceramic matrix composites. The remaining chapters are devoted primarily to theoretical treatments of composite behavior, with emphasis on the understanding of damage mechanisms such as cracking, delamination, and fibre breakage. Where a mathematical approach is required, an attempt is made to relate the sometimes rather abstract notions back at the structure of the material being discussed. With extensive sets of sample problems accompanying each chapter, Fundamentals of Fibre Reinforced Composite Materials is ideally suited to undergraduate and graduate students of materials science, structural, mechanical, and aeronautical engineering, polymer science, metallurgy, physics and chemistry. It will also be of use as a reference to researchers working with composite materials and material scientists in general.

Download or read book Interfaces in Particle and Fibre Reinforced Composites written by Kheng-Lim Goh and published by Woodhead Publishing. This book was released on 2019-11-27 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interfaces in Particle and Fibre-Reinforced Composites: From Macro- to Nanoscale addresses recent research findings on the particle-matrix interface at different length scales. The book's main focus is on the reinforcement of materials by particles that can result in a composite material of high stiffness and strength, but it also focuses on how the particle interacts with the (matrix) material, which may be a polymer, biological-based material, ceramic or conventional metal. The different types of particle reinforced composites are discussed, as is load transfer at the particle-matrix interface. Readers will learn how to select materials and about particle structure. Significant progress has been made in applying these approaches, thus making this book a timely piece on recent research findings on the particle-matrix interface at different length scales. - Features wide coverage, from polymer, to ceramics and metal-based particulate composites - Structured in a logical order to cover fundamental studies, computer simulations, experimental techniques and characterization

Download or read book Metal Matrix Composites Innovations Advances and Applications written by T. S. Srivatsan and published by Springer. This book was released on 2018-01-15 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes papers on recent research carried out in the field of metal-matrix composites (MMCs). Processing, microstructure, and mechanical properties of MMCs and unreinforced matrix alloys will be covered with a focus on aluminum, titanium, nickel, and copper MMCs. Those involved in the research of MMCs and unreinforced alloys, particularly in aerospace, space, and automotive materials research, will find this volume indispensible.