Download or read book Fermilab R D Program in Medium Energyelectron Cooling written by and published by . This book was released on 1996 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fermilab began an R & D program in medium energy electron cooling in April 1995 with the object of cooling 8 GeV antiprotons in a new 3.3 km permanent magnet storage ring (Recycler) to be built in the same tunnel as the Main Injector (MI). The MI is to be completed in 1998, and it is planned to install the Recycler by the end of 1997 to reduce interference during the final rush of MI installation. Although the Recycler will employ stochastic cooling initially, its potential for contributing an order of magnitude to Tevatron collider luminosity is tied to electron cooling. The short time scale and Fermilab's limited familiarity with low energy electron beams has given rise to a two-phase development plan. The first phase is to build a cooling system based on an electron beam of ≥ 200 mA before year 2000. The second phase of about 3 years is planned to reach electron current of 2 A or more. This report describes the general scheme for high luminosity collider operation as well as the R & D plan and progress to date. 17 refs., 5 figs., 1 tab.
Download or read book Fermilab R ampersand D Program in Medium Energyelectron Cooling written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Fermilab began an R & D program in medium energy electron cooling in April 1995 with the object of cooling 8 GeV antiprotons in a new 3.3 km permanent magnet storage ring (Recycler) to be built in the same tunnel as the Main Injector (MI). The MI is to be completed in 1998, and it is planned to install the Recycler by the end of 1997 to reduce interference during the final rush of MI installation. Although the Recycler will employ stochastic cooling initially, its potential for contributing an order of magnitude to Tevatron collider luminosity is tied to electron cooling. The short time scale and Fermilab's limited familiarity with low energy electron beams has given rise to a two-phase development plan. The first phase is to build a cooling system based on an electron beam of[ge] 200 mA before year 2000. The second phase of about 3 years is planned to reach electron current of 2 A or more. This report describes the general scheme for high luminosity collider operation as well as the R & D plan and progress to date. 17 refs., 5 figs., 1 tab.
Download or read book Medium Energy Electron Cooling R and D at Fermilab Context and Status written by and published by . This book was released on 1996 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electron cooling at the proposed Recycler 8 GeV storage ring has been identified as a key element in exploiting the capacity of the Fermilab Main Injector for an additional factor of ten in Tevatron luminosity above the goal for the next collider run, ultimately to> 1033 cm−2s−1. The most basic requirement for increased luminosity is a large stack of antiprotons cooled to emittance comparable to that of the proton beam. Although electron cooling is inferior to the stochastic technique for cooling large emittance beams, its rate is practically independent of the antiproton intensity. For cooling intense beams of low or moderate emittance, electron cooling excels. The realization of electron cooling for 8 GeV antiprotons requires major extension of existing practice in electron energy and length of the cooling interaction region. It will require 4.3 MeV dc electron beam maintaining high quality and precise collinearity with the antiprotons over a 66 m straight section. The initial goal of the R and D project is 200 mA electron current in about three years; the plan is to reach 2 A over the following three years.
Download or read book Contributions to the Second Workshop on Medium Energy Electron Cooling MEEC96 written by and published by . This book was released on 1997 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEEC96 was a workshop devoted primarily to discussion within four working groups, not a mini-conference of prepared reports. Therefore, although there are contributions bearing the name of a single author, much of what was learned came in extemporaneous discussion of the issues posed to the participants. The original plan to produce formal proceedings has been dropped because of the limited number of participants willing to write up their own contributions and because of the difficulty of converting free-wheeling discussion to the written word. The premsise for the 1996 gathering was to set a critique of Fermilab's R & D effort at cooling a ring of 8 GeV {bar p}'s. Separate abstracts have been submitted to the energy database for contributions to this workshop.
Download or read book Fermilab 4 3 MeV Electron Cooler written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Recycler Electron Cooler (REC) was the first cooler working at a relativistic energy (gamma = 9.5). It was successfully developed in 1995-2004 and was in operation at Fermilab in 2005-2011, providing cooling of antiprotons in the Recycler ring. After introducing the physics of electron cooling and the REC system, this paper describes measurements carried out to tune the electron beam and optimize its cooling properties. In particular, we discuss the cooling strategy adopted for maximizing the collider integrated luminosity.
Download or read book Status of the Fermilab Electron Cooling Recirculation Project written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The electron cooling project requires a high current electron beam with high reliability to provide the consistent cooling required by Fermilab's physics program. We are using a 5URE-2 Pelletron to provide this beam. The program is developing a high current DC recirculating electron beam with high recovery efficiency. The present layout uses 2 sets of tubes with acceleration, a 180{sup o} bend, and deceleration for a total of about 10 meters of beam line. The project's nominal operating parameters are .5 A at 4.3 MeV with the emission cathode immersed in a 200-600 G magnetic field.
Download or read book Fermilab Electron Cooling Experiment Design Report written by Fermi National Accelerator Laboratory and published by . This book was released on 1978 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Status of the Fermilab Electron Cooling Project written by and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fermilab Report written by and published by . This book was released on 1982 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low energy Run of Fermilab Electron Cooler s Beam Generation System written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book FERMILAB S EXPERIENCE WITH A HIGH ENERGY ELECTRON COOLER written by and published by . This book was released on 2013 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multi gev High Performance Accelerators And Related Technology Proceedings Of The Xvi Rcnp Osaka International Symposium written by Kichiji Hatanaka and published by World Scientific. This book was released on 1997-12-18 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers the field of circular accelerators and related technology for the sub-GeV to multi-GeV energy region from the viewpoint of realization of high performance, i.e., performance and perspectives of operating multi-GeV accelerators, future projects in the multi-GeV energy region, lattice designs and beam dynamics, electron cooling and stochastic cooling, injection and extraction, beam diagnostics, superconducting and normal magnets, magnet power supplies, RF systems, and internal targets. The contributors include leading accelerator physicists from around the world.
Download or read book Survey and Alignment of the Fermilab Electron Cooling System written by Babatunde O'Sheg Oshinowo and published by . This book was released on 2006 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of achieving the Tevatron luminosity of 3 x 10{sup 32} cm{sup -2}s{sup -1} requires Electron Cooling in the Recycler Ring to provide an increased flux of antiprotons. The Fermilab Electron Cooling system has been designed to assist accumulation of antiprotons for the Tevatron collider operations. The installation along with the survey and alignment of the Electron Cooling system in the Recycler Ring were completed in November 2004. The Electron Cooling system was fully commissioned in May 2005 and the first cooling of antiprotons was achieved in July 2005. This paper discusses the alignment methodology employed to survey and align the Electron Cooling system.
Download or read book Summary of Fermilab s Recycler Electron Cooler Operation and Studies written by and published by . This book was released on 2012 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fermilab's Recycler ring was used as a storage ring for accumulation and subsequent manipulations of 8 GeV antiprotons destined for the Tevatron collider. To satisfy these missions, a unique electron cooling system was designed, developed and successfully implemented. The most important features that distinguish the Recycler cooler from other existing electron coolers are its relativistic energy, 4.3 MV combined with 0.1-0.5 A DC beam current, a weak continuous longitudinal magnetic field in the cooling section, 100 G, and lumped focusing elsewhere. With the termination of the Tevatron collider operation, so did the cooler. In this article, we summarize the experience of running this unique machine.
Download or read book EPAC 92 written by H. Henke and published by Atlantica Séguier Frontières. This book was released on 1992 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physics Briefs written by and published by . This book was released on 1989 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt:
