Download or read book Parallel Computing written by G. Jack Lipovski and published by Wiley-Interscience. This book was released on 1987-05-14 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematics of Computing -- Parallelism.
Download or read book Fault Diagnosis and Fault Tolerance written by Tinghuai Chen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the rapid growth of integration scale of VLSI chips and the present need for reliable computers in space exploration, fault diagnosis and fault toleran ce have become more important than before, and hence reveal a lot of interest ing topics which attract many researchers to make a great number of contribu tions to this field. In recent years, many new and significant results have been achieved. A quick scan over the proceedings of the conferences on fault tolerant computing and design automation as well as on testing will convince the reader of that. But unfortunately these achievements have not been entire ly reflected in the textbooks, so that there seems to be a gap for the new researcher who already has the basic knowledge and wants to begin research in this area. As a remedy for this deficiency, this book is intended for begin ners, especially graduate students, as a textbook which will lead them to the frontier of some branches of the fault-tolerant computing field. The first chapter introduces the four-valued logic B4 and its applica tions. In 1966 Roth first proposed this four-valued logic as a technique to generate tests for logical circuits, but this work did not concern the mathe matical basis of B4 itself.
Download or read book Design And Analysis Of Reliable And Fault tolerant Computer Systems written by Mostafa I Abd-el-barr and published by World Scientific. This book was released on 2006-12-15 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering both the theoretical and practical aspects of fault-tolerant mobile systems, and fault tolerance and analysis, this book tackles the current issues of reliability-based optimization of computer networks, fault-tolerant mobile systems, and fault tolerance and reliability of high speed and hierarchical networks.The book is divided into six parts to facilitate coverage of the material by course instructors and computer systems professionals. The sequence of chapters in each part ensures the gradual coverage of issues from the basics to the most recent developments. A useful set of references, including electronic sources, is listed at the end of each chapter./a
Download or read book Tutorial Interconnection Networks for Parallel and Distributed Processing written by Chuan-lin Wu and published by . This book was released on 1984 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interconnection Networks written by Jose Duato and published by Morgan Kaufmann. This book was released on 2003 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foreword -- Foreword to the First Printing -- Preface -- Chapter 1 -- Introduction -- Chapter 2 -- Message Switching Layer -- Chapter 3 -- Deadlock, Livelock, and Starvation -- Chapter 4 -- Routing Algorithms -- Chapter 5 -- CollectiveCommunicationSupport -- Chapter 6 -- Fault-Tolerant Routing -- Chapter 7 -- Network Architectures -- Chapter 8 -- Messaging Layer Software -- Chapter 9 -- Performance Evaluation -- Appendix A -- Formal Definitions for Deadlock Avoidance -- Appendix B -- Acronyms -- References -- Index.
Download or read book Crossbar Based Interconnection Networks written by Mohsen Jahanshahi and published by Springer. This book was released on 2018-04-10 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique text/reference provides an overview of crossbar-based interconnection networks, offering novel perspectives on these important components of high-performance, parallel-processor systems. A particular focus is placed on solutions to the blocking and scalability problems. Topics and features: introduces the fundamental concepts in interconnection networks in multi-processor systems, including issues of blocking, scalability, and crossbar networks; presents a classification of interconnection networks, and provides information on recognizing each of the networks; examines the challenges of blocking and scalability, and analyzes the different solutions that have been proposed; reviews a variety of different approaches to improve fault tolerance in multistage interconnection networks; discusses the scalable crossbar network, which is a non-blocking interconnection network that uses small-sized crossbar switches as switching elements. This invaluable work will be of great benefit to students, researchers and practitioners interested in computer networks, parallel processing and reliability engineering. The text is also essential reading for course modules on interconnection network design and reliability.
Download or read book A Fault Tolerant Interconnection Network Using Error Correcting Codes written by J. Edward Lilienkamp and published by . This book was released on 1982 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Parallel Computing written by Jonathan P. Gray and published by IOS Press. This book was released on 1995 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The broadening of interest in parallel computing and transputers is reflected this book. Topics discussed include: concurrent programming; graphics and image processing; parallel applications; robotics; and control and software tools. The book also features a collection of abstracts of poster presentations.
Download or read book Multistage Interconnection Network Design for Engineers written by Shilpa Gupta and published by Bentham Science Publishers. This book was released on 2023-12-14 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a quick and easy understanding of multistage interconnection networks (MINs) for engineers. The book contents focus on the design, performance metrics, and evaluation of these networks which are crucial in modern computer architecture. The contents equip engineering students, apprentices and professionals with in-depth knowledge and analysis of MINS, enabling them to build complex computer architectures for efficient data communications and cost effective solutions for circuit design. The book starts with an introduction to MINS and subsequently progresses to the evaluation of a range of MINS (SEN, Gamma-Minus, FTSN, FTGN, SEGIN). Key highlights of the book include: · Easy to understand notes on design, reliability and fault tolerance · Covers a wide range of MIN types with notes on design variants · Supplementary information aiding comprehension of the main content. · A curated list of references for further exploration and deeper understanding.
Download or read book Fault Tolerant Computing Systems written by Mario Dal Cin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: 5th International GI/ITG/GMA Conference, Nürnberg, September 25-27, 1991. Proceedings
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings written by and published by IEEE Computer Society. This book was released on 1984 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Testing and Diagnosis of VLSI and ULSI written by F. Lombardi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a collection of papers presented at the NATO Advanced Study Institute on ·Testing and Diagnosis of VLSI and ULSI" held at Villa Olmo, Como (Italy) June 22 -July 3,1987. High Density technologies such as Very-Large Scale Integration (VLSI), Wafer Scale Integration (WSI) and the not-so-far promises of Ultra-Large Scale Integration (ULSI), have exasperated the problema associated with the testing and diagnosis of these devices and systema. Traditional techniques are fast becoming obsolete due to unique requirements such as limited controllability and observability, increasing execution complexity for test vector generation and high cost of fault simulation, to mention just a few. New approaches are imperative to achieve the highly sought goal of the • three months· turn around cycle time for a state-of-the-art computer chip. The importance of testing and diagnostic processes is of primary importance if costs must be kept at acceptable levels. The objective of this NATO-ASI was to present, analyze and discuss the various facets of testing and diagnosis with respect to both theory and practice. The contents of this volume reflect the diversity of approaches currently available to reduce test and diagnosis time. These approaches are described in a concise, yet clear way by renowned experts of the field. Their contributions are aimed at a wide readership: the uninitiated researcher will find the tutorial chapters very rewarding. The expert wiII be introduced to advanced techniques in a very comprehensive manner.
Download or read book The Evolution of Fault Tolerant Computing written by A. Avizienis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the editors of this book, as well as for many other researchers in the area of fault-tolerant computing, Dr. William Caswell Carter is one of the key figures in the formation and development of this important field. We felt that the IFIP Working Group 10.4 at Baden, Austria, in June 1986, which coincided with an important step in Bill's career, was an appropriate occasion to honor Bill's contributions and achievements by organizing a one day "Symposium on the Evolution of Fault-Tolerant Computing" in the honor of William C. Carter. The Symposium, held on June 30, 1986, brought together a group of eminent scientists from all over the world to discuss the evolu tion, the state of the art, and the future perspectives of the field of fault-tolerant computing. Historic developments in academia and industry were presented by individuals who themselves have actively been involved in bringing them about. The Symposium proved to be a unique historic event and these Proceedings, which contain the final versions of the papers presented at Baden, are an authentic reference document.
Download or read book Fault Tolerant Parallel and Distributed Systems written by Dimiter R. Avresky and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most important use of computing in the future will be in the context of the global "digital convergence" where everything becomes digital and every thing is inter-networked. The application will be dominated by storage, search, retrieval, analysis, exchange and updating of information in a wide variety of forms. Heavy demands will be placed on systems by many simultaneous re quests. And, fundamentally, all this shall be delivered at much higher levels of dependability, integrity and security. Increasingly, large parallel computing systems and networks are providing unique challenges to industry and academia in dependable computing, espe cially because of the higher failure rates intrinsic to these systems. The chal lenge in the last part of this decade is to build a systems that is both inexpensive and highly available. A machine cluster built of commodity hardware parts, with each node run ning an OS instance and a set of applications extended to be fault resilient can satisfy the new stringent high-availability requirements. The focus of this book is to present recent techniques and methods for im plementing fault-tolerant parallel and distributed computing systems. Section I, Fault-Tolerant Protocols, considers basic techniques for achieving fault-tolerance in communication protocols for distributed systems, including synchronous and asynchronous group communication, static total causal order ing protocols, and fail-aware datagram service that supports communications by time.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1988 with total page 1684 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings 20th International Conference Parallel Processing 1991 written by Tse-yun Feng and published by CRC Press. This book was released on 1991-07-30 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
