Download or read book Fault Detection Supervision and Safety of Technical Processes 2006 written by Hong-Yue Zhang and published by Elsevier. This book was released on 2007-03-01 with total page 1576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe and reliable operation of technical systems is of great significance for the protection of human life and health, the environment, and of the vested economic value. The correct functioning of those systems has a profound impact also on production cost and product quality. The early detection of faults is critical in avoiding performance degradation and damage to the machinery or human life. Accurate diagnosis then helps to make the right decisions on emergency actions and repairs. Fault detection and diagnosis (FDD) has developed into a major area of research, at the intersection of systems and control engineering, artificial intelligence, applied mathematics and statistics, and such application fields as chemical, electrical, mechanical and aerospace engineering. IFAC has recognized the significance of FDD by launching a triennial symposium series dedicated to the subject. The SAFEPROCESS Symposium is organized every three years since the first symposium held in Baden-Baden in 1991. SAFEPROCESS 2006, the 6th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes was held in Beijing, PR China. The program included three plenary papers, two semi-plenary papers, two industrial talks by internationally recognized experts and 258 regular papers, which have been selected out of a total of 387 regular and invited papers submitted. * Discusses the developments and future challenges in all aspects of fault diagnosis and fault tolerant control * 8 invited and 36 contributed sessions included with a special session on the demonstration of process monitoring and diagnostic software tools

Download or read book Fault Detection Supervision and Safety of Technical Processes 2003 SAFEPROCESS 2003 written by Marcel Staroswiecki and published by Elsevier. This book was released on 2004-02-27 with total page 1210 pages. Available in PDF, EPUB and Kindle. Book excerpt: A three-volume work bringing together papers presented at 'SAFEPROCESS 2003', including four plenary papers on statistical, physical-model-based and logical-model-based approaches to fault detection and diagnosis, as well as 178 regular papers.

Download or read book Artificial Neural Nets and Genetic Algorithms written by David W. Pearson and published by Springer Science & Business Media. This book was released on 2011-06-28 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2003 edition of ICANNGA marks a milestone in this conference series, because it is the tenth year of its existence. The series began in 1993 with the inaugural conference at Innsbruck in Austria. At that first conference, the organisers decided to organise a similar scientific meeting every two years. As a result, conferences were organised at Ales in France (1995), Norwich in England (1997), Portoroz in Slovenia (1999) and Prague in the Czech Republic (2001). It is a great honour that the conference is taking place in France for the second time. Each edition of ICANNGA has been special and had its own character. Not only that, participants have been able to sample the life and local culture in five different European coun tries. Originally limited to neural networks and genetic algorithms the conference has broadened its outlook over the past ten years and now includes papers on soft computing and artificial intelligence in general. This is one of the reasons why the reader will find papers on fuzzy logic and various other topics not directly related to neural networks or genetic algorithms included in these proceedings. We have, however, kept the same name, "International Conference on Artificial Neural Networks and Genetic Algorithms". All of the papers were sorted into one of six principal categories: neural network theory, neural network applications, genetic algorithm and evolutionary computation theory, genetic algorithm and evolutionary computation applications, fuzzy and soft computing theory, fuzzy and soft computing applications.

Download or read book Proceedings of the International Conference on Smart Materials Structures and Systems written by and published by Allied Publishers. This book was released on 1999 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fault Diagnosis Systems written by Rolf Isermann and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: With increasing demands for efficiency and product quality plus progress in the integration of automatic control systems in high-cost mechatronic and safety-critical processes, the field of supervision (or monitoring), fault detection and fault diagnosis plays an important role. The book gives an introduction into advanced methods of fault detection and diagnosis (FDD). After definitions of important terms, it considers the reliability, availability, safety and systems integrity of technical processes. Then fault-detection methods for single signals without models such as limit and trend checking and with harmonic and stochastic models, such as Fourier analysis, correlation and wavelets are treated. This is followed by fault detection with process models using the relationships between signals such as parameter estimation, parity equations, observers and principal component analysis. The treated fault-diagnosis methods include classification methods from Bayes classification to neural networks with decision trees and inference methods from approximate reasoning with fuzzy logic to hybrid fuzzy-neuro systems. Several practical examples for fault detection and diagnosis of DC motor drives, a centrifugal pump, automotive suspension and tire demonstrate applications.

Download or read book Control Systems Robotics and AutomatioN Volume XVI written by Heinz D. Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs.

Download or read book Diagnosis and Fault tolerant Control Volume 2 written by Vicenc Puig and published by John Wiley & Sons. This book was released on 2021-12-29 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in fault diagnosis and fault-tolerant control of dynamic processes. Its impetus derives from the need for an overview of the challenges of the fault diagnosis technique and sustainable control, especially for those demanding systems that require reliability, availability, maintainability, and safety to ensure efficient operations. Moreover, the need for a high degree of tolerance with respect to possible faults represents a further key point, primarily for complex systems, as modeling and control are inherently challenging, and maintenance is both expensive and safety-critical. Diagnosis and Fault-tolerant Control 2 also presents and compares different fault diagnosis and fault-tolerant schemes, using well established, innovative strategies for modeling the behavior of the dynamic process under investigation. An updated treatise of diagnosis and fault-tolerant control is addressed with the use of essential and advanced methods including signal-based, model-based and data-driven techniques. Another key feature is the application of these methods for dealing with robustness and reliability.

Download or read book Modelling and Estimation Strategies for Fault Diagnosis of Non Linear Systems written by Marcin Witczak and published by Springer Science & Business Media. This book was released on 2007-07-08 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents a variety of techniques that can be used for designing robust fault diagnosis schemes for non-linear systems. The introductory part of the book is of a tutorial value and can be perceived as a good starting point for the new-comers to this field. Subsequently, advanced robust observer structures are presented. Parameter estimation based techniques are discussed as well. A particular attention is drawn to experimental design for fault diagnosis. The book also presents a number of robust soft computing approaches utilizing evolutionary algorithms and neural networks. All approaches described in this book are illustrated by practical applications.

Download or read book Model based Fault Diagnosis in Dynamic Systems Using Identification Techniques written by Silvio Simani and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety in industrial process and production plants is a concern of rising importance but because the control devices which are now exploited to improve the performance of industrial processes include both sophisticated digital system design techniques and complex hardware, there is a higher probability of failure. Control systems must include automatic supervision of closed-loop operation to detect and isolate malfunctions quickly. A promising method for solving this problem is "analytical redundancy", in which residual signals are obtained and an accurate model of the system mimics real process behaviour. If a fault occurs, the residual signal is used to diagnose and isolate the malfunction. This book focuses on model identification oriented to the analytical approach of fault diagnosis and identification covering: choice of model structure; parameter identification; residual generation; and fault diagnosis and isolation. Sample case studies are used to demonstrate the application of these techniques.

Download or read book Fault Detection and Isolation written by Nader Meskin and published by Springer Science & Business Media. This book was released on 2011-01-27 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Fault Detection and Isolation: Multi-Vehicle Unmanned System” deals with the design and development of fault detection and isolation algorithms for unmanned vehicles such as spacecraft, aerial drones and other related vehicles. Addressing fault detection and isolation is a key step towards designing autonomous, fault-tolerant cooperative control of networks of unmanned systems. This book proposes a solution based on a geometric approach, and presents new theoretical findings for fault detection and isolation in Markovian jump systems. Also discussed are the effects of large environmental disturbances, as well as communication channels, on unmanned systems. The book proposes novel solutions to difficulties like robustness issues, as well as communication channel anomalies. “Fault Detection and Isolation: Multi-Vehicle Unmanned System” is an ideal book for researchers and engineers working in the fields of fault detection, as well as networks of unmanned vehicles.

Download or read book Fault Diagnosis for Electric Power Systems and Electric Vehicles written by G. Rigatos and published by CRC Press. This book was released on 2024-10-30 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present monograph offers a detailed and in-depth analysis of the topic of fault diagnosis for electric power systems and electric vehicles. First, the monograph treats the problem of Fault diagnosis with model-based and model-free techniques (Model-based fault diagnosis techniques and Model-free fault diagnosis techniques). Next, the monograph provides a solution for the problem of Control and fault diagnosis for Synchronous Generator-based renewable energy systems (Control of the marine-turbine and synchronous-generator unit and Fault diagnosis of the marine turbine and synchronous-generator unit. Additionally, the monograph introduces novel solutions for the problem of Fault diagnosis for electricity microgrids and gas processing units (Fault diagnosis for electric power DC microgrids and Fault diagnosis for electrically actuated gas compressors). Furthermore, the monograph analyzes and solves the problem of Fault diagnosis for gas and steam-turbine power generation units (Fault diagnosis for the gas-turbine and Synchronous Generator electric power unit and for the steam-turbine and synchronous generator power unit). Finally, the monograph provides a solution for the problem of Fault diagnosis for wind power units and for the distribution grid (Fault diagnosis for wind power generators and Fault diagnosis for the electric power distribution grid). The new fault detection and isolation methods that the monograph develops are of generic use and are addressed to a wide class of nonlinear dynamical systems, with emphasis on electric power systems and electric vehicles. On the one side, model-based fault detection and isolation methods are analyzed. In this case, known models about the dynamics of the monitored system are used by nonlinear state observers and Kalman Filters, which emulate the system’s fault-free condition. On the other side, model-free fault detection and isolation methods are analyzed. In this case, raw data are processed by neural networks and nonlinear regressors to generate models that emulate the fault-free condition of the monitored system. Statistical tests based on the processing of the residuals, which are formed between the outputs of the monitored system and the outputs of the fault-free model provide objective and almost infallible criteria about the occurrence of failures. The new fault detection and isolation methods with statistical procedures for defining fault thresholds enable early fault diagnosis and reveal incipient changes in the parameters of the monitored systems.

Download or read book Issues of Fault Diagnosis for Dynamic Systems written by Ron J. Patton and published by Springer Science & Business Media. This book was released on 2000-03-29 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the time our first book Fault Diagnosis in Dynamic Systems: The ory and Applications was published in 1989 by Prentice Hall, there has been a surge in interest in research and applications into reliable methods for diag nosing faults in complex systems. The first book sold more than 1,200 copies and has become the main text in fault diagnosis for dynamic systems. This book will follow on this excellent record by focusing on some of the advances in this subject, by introducing new concepts in research and new application topics. The work cannot provide an exhaustive discussion of all the recent research in fault diagnosis for dynamic systems, but nevertheless serves to sample some of the major issues. It has been valuable once again to have the co-operation of experts throughout the world working in industry, gov emment establishments and academic institutions in writing the individual chapters. Sometimes dynamical systems have associated numerical models available in state space or in frequency domain format. When model infor mation is available, the quantitative model-based approach to fault diagnosis can be taken, using the mathematical model to generate analytically redun dant alternatives to the measured signals. When this approach is used, it becomes important to try to understand the limitations of the mathematical models i. e. , the extent to which model parameter variations occur and the effect of changing the systems point of operation.

Download or read book Lfm2000 written by and published by . This book was released on 2000 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fault Detection and Diagnosis in Industrial Systems written by L.H. Chiang and published by Springer Science & Business Media. This book was released on 2000-12-11 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Early and accurate fault detection and diagnosis for modern chemical plants can minimize downtime, increase the safety of plant operations, and reduce manufacturing costs. This book presents the theoretical background and practical techniques for data-driven process monitoring. It demonstrates the application of all the data-driven process monitoring techniques to the Tennessee Eastman plant simulator, and looks at the strengths and weaknesses of each approach in detail. A plant simulator and problems allow readers to apply process monitoring techniques.

Download or read book Fuzzy Systems and Data Mining IV written by A.J. Tallón-Ballesteros and published by IOS Press. This book was released on 2018-11-06 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: Big Data Analytics is on the rise in the last years of the current decade. Data are overwhelming the computation capacity of high performance servers. Cloud, grid, edge and fog computing are a few examples of the current hype. Computational Intelligence offers two faces to deal with the development of models: on the one hand, the crisp approach, which considers for every variable an exact value and, on the other hand, the fuzzy focus, which copes with values between two boundaries. This book presents 114 papers from the 4th International Conference on Fuzzy Systems and Data Mining (FSDM 2018), held in Bangkok, Thailand, from 16 to 19 November 2018. All papers were carefully reviewed by program committee members, who took into consideration the breadth and depth of the research topics that fall within the scope of FSDM. The acceptance rate was 32.85% . Offering a state-of-the-art overview of fuzzy systems and data mining, the publication will be of interest to all those whose work involves data science.

Download or read book American Book Publishing Record written by and published by . This book was released on 1999 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Theory And Practice Of Control And Systems Proceedings Of The 6th Ieee Mediterranean Conference written by Antonio Tornambe and published by World Scientific. This book was released on 1999-01-04 with total page 863 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers together all the lectures presented at the 6th IEEE Mediterranean Conference. It focuses on the mathematical aspects in the theory and practice of control and systems, including stability and stabilizability, robust control, adaptive control, robotics and manufacturing; these topics are under intense investigation and development in the engineering and mathematics communities. The volume should have immediate appeal for a large group of engineers and mathematicians who are interested in very abstract as well as very concrete aspects of control and system theory.