Download or read book Fault Analysis and Protection System Design for DC Grids written by Abhisek Ukil and published by Springer Nature. This book was released on 2020-04-13 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive reference guide to the important topics of fault analysis and protection system design for DC grids, at various voltage levels and for a range of applications. It bridges a much-needed research gap to enable wide-scale implementation of energy-efficient DC grids. Following an introduction, DC grid architecture is presented, covering the devices, operation and control methods. In turn, analytical methods for DC fault analysis are presented for different types of faults, followed by separate chapters on various DC fault identification methods, using time, frequency and time-frequency domain analyses of the DC current and voltage signals. The unit and non-unit protection strategies are discussed in detail, while a dedicated chapter addresses DC fault isolation devices. Step-by-step guidelines are provided for building hardware-based experimental test setups, as well as methods for validating the various algorithms. The book also features several application-driven case studies.
Download or read book Protection Principle and Technology of the VSC Based DC Grid written by Bin Li and published by Springer Nature. This book was released on 2020-08-13 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses key techniques of protection and fault ride-through in VSC-HVDC grids, including high-speed selective protection, DC fault current limitation, converter restarting, and DCCB reclosing strategies. It investigates how high-speed transient-variable-based protection can be used to improve grids’ acting sensitivity, acting reliability, and ability to withstand high transition resistance compared with traditional protection. In addition, it discusses the applicability of the pilot protections, including the current differential protection and travelign-wave based protection, in the dc grid, as well as the improved methods. Furthermore, it proposes several DC FCL topologies, which are suitable for DC grids. Lastly, in the context of overhead line application conditions, it explores converter restarting and DCCB reclosing strategies, which not only identify the fault property, but also limit the secondary damage to the system, improving the system’s operation security and reliability. As such, the book offers a comprehensive overview of original and advanced methods and techniques for the protection of VSC-HVDC grids.
Download or read book Multi terminal Direct Current Grids written by Nilanjan Chaudhuri and published by John Wiley & Sons. This book was released on 2014-09-09 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: A generic DC grid model that is compatible with the standard AC system stability model is presented and used to analyse the interaction between the DC grid and the host AC systems. A multi-terminal DC (MTDC) grid interconnecting multiple AC systems and offshore energy sources (e.g. wind farms) across the nations and continents would allow effective sharing of intermittent renewable resources and open market operation for secure and cost-effective supply of electricity. However, such DC grids are unprecedented with no operational experience. Despite lots of discussions and specific visions for setting up such MTDC grids particularly in Europe, none has yet been realized in practice due to two major technical barriers: Lack of proper understanding about the interaction between a MTDC grid and the surrounding AC systems. Commercial unavailability of efficient DC side fault current interruption technology for conventional voltage sourced converter systems This book addresses the first issue in details by presenting a comprehensive modeling, analysis and control design framework. Possible methodologies for autonomous power sharing and exchange of frequency support across a MTDC grid and their impact on overall stability is covered. An overview of the state-of-the-art, challenges and on-going research and development initiatives for DC side fault current interruption is also presented.
Download or read book Modeling Operation and Analysis of DC Grids written by Alejandro Garces and published by Academic Press. This book was released on 2021-07-01 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling, Operation, and Analysis of DC Grids presents a unified vision of direct current grids with their core analysis techniques, uniting power electronics, power systems, and multiple scales of applications. Part one presents high power applications such as HVDC transmission for wind energy, faults and protections in HVDC lines, stability analysis and inertia emulation. The second part addresses current applications in low voltage such as microgrids, power trains and aircraft applications. All chapters are self-contained with numerical and experimental analysis. Provides a unified, coherent presentation of DC grid analysis based on modern research in power systems, power electronics, microgrids and MT-HVDC transmission Covers multiple scales of applications in one location, addressing DC grids in electric vehicles, microgrids, DC distribution, multi-terminal HVDC transmission and supergrids Supported by a unified set of MATLAB and Simulink test systems designed for application scenarios
Download or read book Control of Overhead Power Lines with Unmanned Aerial Vehicles UAVs written by Yevgen I. Sokol and published by Springer Nature. This book was released on 2021-04-15 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the development of complex methods and means of their implementation with using UAVs aimed for improving the safety and efficiency of the energy system. The scientific problem of complex automated monitoring of the energy system objects with using UAVs has been solved, including the control of its elements in the visible and infrared range, the acoustic spectrum, as well as by the levels of the electric field strength. The scientific foundations of mathematical, physical and statistical modeling of electromagnetic and acoustic fields in the elements of electric power objects of complex spatial configurations have been created, taking into account the possibility of the appearance of such nonlinear processes as corona discharges and breakdowns at long air gaps. Improved methods are proposed for determining the exact location of accidents on power lines using UAVs on the basis of the developed mathematical models and the obtained analytical expressions. Conceptual foundations for the creation of methods and means for monitoring the state of insulation, lightning protection systems and the integrity of the structures of electric power facilities with using UAVs have been formed.
Download or read book Distributed Generation Systems written by Gevork B. Gharehpetian and published by Butterworth-Heinemann. This book was released on 2017-05-19 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.580 pages Approx.580 pages
Download or read book DC Technology in Utility Grids written by Sedigheh Rabiee and published by BoD – Books on Demand. This book was released on 2021-12-17 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: The assembly of this study started in 2013 during the preparation of the foundation of the Flexible Electrical Networks (FEN) Research Campus, an institution supported by the German Federal Ministry of Education and Science, concentrating on DC technology in power grids as an enabler for the energy transition. It reflects the state-of-the-art and research needs of DC technology against the background of application in public grids up until the year 2015. Topics as components, control, management and automation, high-, medium, and low-voltage grid concepts as well as social dimensions, economics, and impact on living beings are considered. After substantial editorial effort, its first public edition has become ready now. The aim of FEN is to investigate and to develop flexible power grids. Such grid will safeguard the future energy supply with a high share of fluctuating and decentralized renewable energy sources. At the same time, these grids will enable a reliable and affordable energy supply in the future. The objective is to provide new technologies and concepts for the security and quality of the energy supply in the transmission and distribution grids. To pursue this goal, the use of direct-current (DC) technology, based on power electronics, automation and communication technologies, plays an important role. Although DC technology is not yet established as a standard technology in the public electrical power supply system, its high potential has been widely recognized. The use of DC is an enabler to make the future energy supply system more economical than a system based on alternating-current (AC), because of its superior properties in handling distributed and fluctuation power generation. Indeed, DC connections are already the most cost-efficient solution in cases of very high-power long-distance point-to-point transmission of electricity or via submarine cables. The objective of the FEN Research Campus is now to achieve and demonstrate feasibility of DC as a standard solution for future electrical grids, as described in this study.
Download or read book Cyber Physical Systems Approach to Smart Electric Power Grid written by Siddhartha Kumar Khaitan and published by Springer. This book was released on 2015-01-02 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents recent advances in the field of modeling, simulation, control, security and reliability of Cyber- Physical Systems (CPS) in power grids. The aim of this book is to help the reader gain insights into working of CPSs and understand their potential in transforming the power grids of tomorrow. This book will be useful for all those who are interested in design of cyber-physical systems, be they students or researchers in power systems, CPS modeling software developers, technical marketing professionals and business policy-makers.
Download or read book Proceedings of 2020 International Top Level Forum on Engineering Science and Technology Development Strategy and The 5th PURPLE MOUNTAIN FORUM PMF2020 written by Yusheng Xue and published by Springer Nature. This book was released on 2021-01-23 with total page 1022 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes original, peer-reviewed research papers from the 2020 International Top-Level Forum on Engineering Science and Technology Development Strategy -- the 5th PURPLE MOUNTAIN FORUM on Smart Grid Protection and Control(PMF2020), held in Nanjing, China, on August 15-16, 2020. Hot topics and cutting edge technologies are included: - Advanced Power Transmission Technology - AC-DC Hybrid Power Grid Technology - eIoT Technology and Application - Operation, Protection and Control of Power Systems Supplied with High Penetration of Renewable Energy Sources - Active Distribution Network Technology - Smart Power Consumption and Energy-saving Technology - New Technology on Substation Automation - Clean Energy Technology - Energy Storage Technology and Application - Key Technology and Application of Integrated Energy - Application of AI, Block Chain, Big Data and Other New Technologies in Energy Industry - Application of New Information and Communication Technology in Energy Industry - Application of Technical Standard System and Related Research in Energy Industry The papers included in this proceeding share the latest research results and practical application examples on the methodologies and algorithms in these areas, which makes the book a valuable reference for researchers, engineers, and university students.
Download or read book HVDC Grids written by Dirk Van Hertem and published by John Wiley & Sons. This book was released on 2016-02-29 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses HVDC grids based on multi-terminal voltage-source converters (VSC), which is suitable for the connection of offshore wind farms and a possible solution for a continent wide overlay grid. HVDC Grids: For Offshore and Supergrid of the Future begins by introducing and analyzing the motivations and energy policy drives for developing offshore grids and the European Supergrid. HVDC transmission technology and offshore equipment are described in the second part of the book. The third part of the book discusses how HVDC grids can be developed and integrated in the existing power system. The fourth part of the book focuses on HVDC grid integration, in studies, for different time domains of electric power systems. The book concludes by discussing developments of advanced control methods and control devices for enabling DC grids. Presents the technology of the future offshore and HVDC grid Explains how offshore and HVDC grids can be integrated in the existing power system Provides the required models to analyse the different time domains of power system studies: from steady-state to electromagnetic transients This book is intended for power system engineers and academics with an interest in HVDC or power systems, and policy makers. The book also provides a solid background for researchers working with VSC-HVDC technologies, power electronic devices, offshore wind farm integration, and DC grid protection.
Download or read book Artificial Intelligence Applications in Electrical Transmission and Distribution Systems Protection written by Almoataz Y. Abdelaziz and published by CRC Press. This book was released on 2021-10-22 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial intelligence (AI) can successfully help in solving real-world problems in power transmission and distribution systems because AI-based schemes are fast, adaptive, and robust and are applicable without any knowledge of the system parameters. This book considers the application of AI methods for the protection of different types and topologies of transmission and distribution lines. It explains the latest pattern-recognition-based methods as applicable to detection, classification, and location of a fault in the transmission and distribution lines, and to manage smart power systems including all the pertinent aspects. FEATURES Provides essential insight on uses of different AI techniques for pattern recognition, classification, prediction, and estimation, exclusive to power system protection issues Presents an introduction to enhanced electricity system analysis using decision-making tools Covers AI applications in different protective relaying functions Discusses issues and challenges in the protection of transmission and distribution systems Includes a dedicated chapter on case studies and applications This book is aimed at graduate students, researchers, and professionals in electrical power system protection, stability, and smart grids.
Download or read book Microgrids and Methods of Analysis written by Gevork B. Gharehpetian and published by Academic Press. This book was released on 2021-07-14 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing penetration of distributed energy resource (DER), distributed generation (DG) and energy storage system (ESS) units in distribution grids leads to the emergence of the concepts of active distribution networks (ADNs), microgrids, and virtual power plants. Nowadays, the use of electronically-coupled distributed energy resources is of great interest that can provide the power of demand side alone or in a small electricity grid. A microgrid is a small-scale power grid in low voltage network that must be able to locally solve energy issues and enhance the flexibility and can operate either in grid-connected or islanded/autonomous mode of operation. To study them, researchers need an appropriate set of methods, software tools, analogous to those exist for large interconnected power systems.The book Microgrids and Methods of Analysis addresses systematic analysis, control/protection systems design, and optimal operation of a distribution system under high penetration of DERs analogous to those that exist for large interconnected power systems. Provides professional guidlines for system planners Explores further research, development, and optimization of existing and new microgrids Addresses analytical methods used for microgrid analysis using advanced research
Download or read book High Voltage Direct Current Transmission written by Dragan Jovcic and published by John Wiley & Sons. This book was released on 2019-07-01 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the latest developments in switchgear and DC/DC converters for DC grids, and includes substantially expanded material on MMC HVDC This newly updated edition covers all HVDC transmission technologies including Line Commutated Converter (LCC) HVDC; Voltage Source Converter (VSC) HVDC, and the latest VSC HVDC based on Modular Multilevel Converters (MMC), as well as the principles of building DC transmission grids. Featuring new material throughout, High Voltage Direct Current Transmission: Converters, Systems and DC Grids, 2nd Edition offers several new chapters/sections including one on the newest MMC converters. It also provides extended coverage of switchgear, DC grid protection and DC/DC converters following the latest developments on the market and in research projects. All three HVDC technologies are studied in a wide range of topics, including: the basic converter operating principles; calculation of losses; system modelling, including dynamic modelling; system control; HVDC protection, including AC and DC fault studies; and integration with AC systems and fundamental frequency analysis. The text includes: A chapter dedicated to hybrid and mechanical DC circuit breakers Half bridge and full bridge MMC: modelling, control, start-up and fault management A chapter dedicated to unbalanced operation and control of MMC HVDC The advancement of protection methods for DC grids Wideband and high-order modeling of DC cables Novel treatment of topics not found in similar books, including SimPowerSystems models and examples for all HVDC topologies hosted by the 1st edition companion site. High Voltage Direct Current Transmission: Converters, Systems and DC Grids, 2nd Edition serves as an ideal textbook for a graduate-level course or a professional development course.
Download or read book Modeling Operation and Analysis of DC Grids written by Alejandro Garces and published by Elsevier. This book was released on 2021-07-06 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling, Operation, and Analysis of DC Grids presents a unified vision of direct current grids with their core analysis techniques, uniting power electronics, power systems, and multiple scales of applications. Part one presents high power applications such as HVDC transmission for wind energy, faults and protections in HVDC lines, stability analysis and inertia emulation. The second part addresses current applications in low voltage such as microgrids, power trains and aircraft applications. All chapters are self-contained with numerical and experimental analysis. Provides a unified, coherent presentation of DC grid analysis based on modern research in power systems, power electronics, microgrids and MT-HVDC transmission Covers multiple scales of applications in one location, addressing DC grids in electric vehicles, microgrids, DC distribution, multi-terminal HVDC transmission and supergrids Supported by a unified set of MATLAB and Simulink test systems designed for application scenarios
Download or read book Design Control and Application of Modular Multilevel Converters for HVDC Transmission Systems written by Kamran Sharifabadi and published by John Wiley & Sons. This book was released on 2016-10-17 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design, Control and Application of Modular Multilevel Converters for HVDC Transmission Systems is a comprehensive guide to semiconductor technologies applicable for MMC design, component sizing control, modulation, and application of the MMC technology for HVDC transmission. Separated into three distinct parts, the first offers an overview of MMC technology, including information on converter component sizing, Control and Communication, Protection and Fault Management, and Generic Modelling and Simulation. The second covers the applications of MMC in offshore WPP, including planning, technical and economic requirements and optimization options, fault management, dynamic and transient stability. Finally, the third chapter explores the applications of MMC in HVDC transmission and Multi Terminal configurations, including Supergrids. Key features: Unique coverage of the offshore application and optimization of MMC-HVDC schemes for the export of offshore wind energy to the mainland. Comprehensive explanation of MMC application in HVDC and MTDC transmission technology. Detailed description of MMC components, control and modulation, different modeling approaches, converter dynamics under steady-state and fault contingencies including application and housing of MMC in HVDC schemes for onshore and offshore. Analysis of DC fault detection and protection technologies, system studies required for the integration of HVDC terminals to offshore wind power plants, and commissioning procedures for onshore and offshore HVDC terminals. A set of self-explanatory simulation models for HVDC test cases is available to download from the companion website. This book provides essential reading for graduate students and researchers, as well as field engineers and professionals who require an in-depth understanding of MMC technology.
Download or read book The Proceedings of the 17th Annual Conference of China Electrotechnical Society written by Qingxin Yang and published by Springer Nature. This book was released on 2023-03-28 with total page 1408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers outstanding papers presented at the 17th Annual Conference of China Electrotechnical Society, organized by China Electrotechnical Society (CES), held in Beijing, China, from September 17 to 18, 2022. It covers topics such as electrical technology, power systems, electromagnetic emission technology, and electrical equipment. It introduces the innovative solutions that combine ideas from multiple disciplines. The book is very much helpful and useful for the researchers, engineers, practitioners, research students, and interested readers.
Download or read book Fault Analysis and its Impact on Grid connected Photovoltaic Systems Performance written by Ahteshamul Haque and published by John Wiley & Sons. This book was released on 2022-11-21 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Analysis and its Impact on Grid-connected Photovoltaic Systems Performance A thorough and authoritative discussion of how to use fault analysis to prevent grid failures In Fault Analysis and its Impact on Grid-connected Photovoltaic Systems Performance, a team of distinguished engineers deliver an insightful and concise analysis on how engineers can use fault analysis to estimate and ensure reliability in grid-connected photovoltaic systems. The editors explore how failure data can be used to identify how power electronics-based power systems operate and how they can help to perform risk analysis and reduce the likelihood and frequency of failure. The book explains how to apply different fault detection techniques—including signal and image processing, fault tolerant approaches—and explores the impact of faults in grid-connected photovoltaic systems. It offers contributions from noted experts in the field and is fully updated to include the latest technologies and approaches. Readers will also find: A failure mode effect classification approach for distributed generation systems and their components Explanations of advanced machine learning approaches with significant market potential and real-world relevance A consideration of the issues pertaining to the integration of power electronics converters with distributed generation systems in grid-connected environments Treatments of IoT-based monitoring, ageing detection for capacitors, image and signal processing approaches, and standards for failure modes and criticality analyses Perfect for manufacturers and engineers working in the power electronics-based power system and smart grid sectors, Fault Analysis and its Impact on Grid- connected Photovoltaic Systems Performance will also earn a place in the libraries of distributed generation companies facing issues in operation and maintenance.