EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Fatigue Data Book

Download or read book Fatigue Data Book written by ASM International and published by ASM International. This book was released on 1994-12-31 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Fatigue Data Handbook

Download or read book Fatigue Data Handbook written by A. Buch and published by Trans Tech Publications Ltd. This book was released on 1998-03-17 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative handbook presents an extensive compilation of data covering all important fatigue situations - fatigue strength of steels and other materials, notch- , size-, and mean stress effects, influence of temperature and corrosion, influence of special surface treatments, fatigue of structural elements and welds, aircraft fatigue, multilevel loading test programs, fatigue performance prediction etc.As is well known, fatigue investigations are often extremely time-consuming. The results of the tests depend upon numerous factors, and therefore handbook data must include all of the parameters which affect reported test results. The calculation of fatigue life and strength cannot be performed without having appropriate information concerning the specific fatigue situation. Nor can test programs be properly prepared without knowing the service conditions and the results of previous tests as, otherwise, the results obtained cannot be generalized. Information on component fatigue behaviour is of importance not only to machine designers but also to production engineers in charge of component manufacture, since processing strongly affects fatigue strength, and to maintenance engineers in charge of the operation and repair of cyclically loaded machine elements.

Book Properties of Aluminum Alloys

Download or read book Properties of Aluminum Alloys written by John Gilbert Kaufman and published by ASM International. This book was released on 2008-01-01 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of data collected and maintained for many years as the property of a large aluminum company, which decided in 1997 to make it available to other engineers and materials specialists. In tabular form, presents data on the tensile and creep properties of eight species of wrought alloys and five species of cast alloys in the various shapes used in applications. Then looks at the fatigue data for several alloys under a range of conditions and loads. The data represent the typical or average findings, and though some were developed years ago, the collection is the largest and most detailed available. There is no index.

Book Fatigue Testing and Analysis

Download or read book Fatigue Testing and Analysis written by Yung-Li Lee and published by Elsevier. This book was released on 2011-04-18 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue Testing and Analysis: Theory and Practice presents the latest, proven techniques for fatigue data acquisition, data analysis, and test planning and practice. More specifically, it covers the most comprehensive methods to capture the component load, to characterize the scatter of product fatigue resistance and loading, to perform the fatigue damage assessment of a product, and to develop an accelerated life test plan for reliability target demonstration. This book is most useful for test and design engineers in the ground vehicle industry. Fatigue Testing and Analysis introduces the methods to account for variability of loads and statistical fatigue properties that are useful for further probabilistic fatigue analysis. The text incorporates and demonstrates approaches that account for randomness of loading and materials, and covers the applications and demonstrations of both linear and double-linear damage rules. The reader will benefit from summaries of load transducer designs and data acquisition techniques, applications of both linear and non-linear damage rules and methods, and techniques to determine the statistical fatigue properties for the nominal stress-life and the local strain-life methods. Covers the useful techniques for component load measurement and data acquisition, fatigue properties determination, fatigue analysis, and accelerated life test criteria development, and, most importantly, test plans for reliability demonstrations Written from a practical point of view, based on the authors' industrial and academic experience in automotive engineering design Extensive practical examples are used to illustrate the main concepts in all chapters

Book Statistical Analysis of Fatigue Data

Download or read book Statistical Analysis of Fatigue Data written by R. E. Little and published by ASTM International. This book was released on 1981 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is commonly assumed in analysing fatigue data that there is a definite functional relationship between life in number of cycles and stress level. However, as has been pointed out several times (1, 2), an examination of the data shows considerable scatter. Even with carefully prepared smooth specimens, all from the same heat of steel, treated in the same manner and tested in the same laboratory, a range of 2 to 1 in number of cycles for failure at the same stress level is normal (1) and a range of 10 to 1 is not unusual (2). If the specimens are tested by different laboratories, slightly varying techniques will introduce further scatter (3).

Book Fatigue of Structures and Materials

Download or read book Fatigue of Structures and Materials written by J. Schijve and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.

Book Fatigue and Fracture

Download or read book Fatigue and Fracture written by F. C. Campbell and published by ASM International. This book was released on 2012-01-01 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book emphasizes the physical and practical aspects of fatigue and fracture. It covers mechanical properties of materials, differences between ductile and brittle fractures, fracture mechanics, the basics of fatigue, structural joints, high temperature failures, wear, environmentally-induced failures, and steps in the failure analysis process."--publishers website.

Book A Unified Statistical Methodology for Modeling Fatigue Damage

Download or read book A Unified Statistical Methodology for Modeling Fatigue Damage written by Enrique Castillo and published by Springer Science & Business Media. This book was released on 2009-02-27 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to provide a uni?ed methodology to derive models for fatigue life. This includes S-N, ?-N and crack propagation models. This is not a conventional book aimed at describing the fatigue fundamentals, but rather a book in which the basic models of the three main fatigue approaches, the stress-based, the strain-based and the fracture mechanics approaches, are contemplated from a novel and integrated point of view. On the other hand, as an alternative to the preferential attention paid to deterministic models based on the physical, phenomenological and empirical description of fatigue, their probabilistic nature is emphasized in this book, in which stochastic fatigue and crack growth models are presented. This book is the result of a long period of close collaborationbetween its two authors who, although of di?erent backgrounds, mathematical and mechanical, both have a strong sense of engineering with respect to the fatigue problem. When the authors of this book ?rst approached the fatigue ?eld in 1982 (twenty six years ago), they found the following scenario: 1. Linear, bilinear or trilinear models were frequently proposed by relevant laboratoriesandacademiccenterstoreproducetheW ̈ ohler?eld. Thiswas the case of well known institutions, which justi?ed these models based on clientrequirementsorpreferences. Thisledtotheinclusionofsuchmodels and methods as, for example, the up-and-down, in standards and o?cial practical directives (ASTM, Euronorm, etc.), which have proved to be unfortunate.

Book Fatigue Strength of Welded Structures

Download or read book Fatigue Strength of Welded Structures written by S J Maddox and published by Woodhead Publishing. This book was released on 2014-03-14 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: The key to avoidance of fatigue, which is the main cause of service failures, is good design. In the case of welded joints, which are particularly susceptible to fatigue, design rules are available. However, their effective use requires a good understanding of fatigue and an appreciation of problems concerned with their practical application. Fatigue strength of welded structures has incorporates up-to-date design rules with high academic standards whilst still achieving a practical approach to the subject. The book presents design recommendations which are based largely on those contained in recent British standards and explains how they are applied in practice. Attention is also focused on the relevant aspects of fatigue in welded joints which are not yet incorporated in codes thus providing a comprehensive aid for engineers concerned with the design or assessment of welded components or structures. Background information is given on the fatigue lives of welded joints which will enable the engineer or student to appreciate why there is such a contrast between welded and unwelded parts, why some welded joints perform better than others and how joints can be selected to optimise fatigue performance.

Book Properties of Aluminum Alloys

Download or read book Properties of Aluminum Alloys written by John Gilbert Kaufman and published by ASM International. This book was released on 1999-01-01 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of data collected and maintained for many years as the property of a large aluminum company, which decided in 1997 to make it available to other engineers and materials specialists. In tabular form, presents data on the tensile and creep properties of eight species of wrought alloys and five species of cast alloys in the various shapes used in applications. Then looks at the fatigue data for several alloys under a range of conditions and loads. The data represent the typical or average findings, and though some were developed years ago, the collection is the largest and most detailed available. There is no index.

Book Gigacycle Fatigue in Mechanical Practice

Download or read book Gigacycle Fatigue in Mechanical Practice written by Claude Bathias and published by CRC Press. This book was released on 2004-09-13 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by pioneers in the study and analysis of very high cycle fatigue this text brings together the most recent findings on gigacycle fatigue phenomena, focusing on improving the reliability and performance of key engine and machine components. This reference reflects the explosion of new concepts, testing methods, and data on very high cycle fa

Book Fatigue of Materials

Download or read book Fatigue of Materials written by Subra Suresh and published by Cambridge University Press. This book was released on 1998-10-29 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a leading researcher in the field, this revised and updated second edition of a highly successful book provides an authoritative, comprehensive and unified treatment of the mechanics and micromechanisms of fatigue in metals, non-metals and composites. The author discusses the principles of cyclic deformation, crack initiation and crack growth by fatigue, covering both microscopic and continuum aspects. The book begins with discussions of cyclic deformation and fatigue crack initiation in monocrystalline and polycrystalline ductile alloys as well as in brittle and semi-/non-crystalline solids. Total life and damage-tolerant approaches are then introduced in metals, non-metals and composites followed by more advanced topics. The book includes an extensive bibliography and a problem set for each chapter, together with worked-out example problems and case studies. This will be an important reference for anyone studying fracture and fatigue in materials science and engineering, mechanical, civil, nuclear and aerospace engineering, and biomechanics.

Book Atlas of Fatigue Curves

Download or read book Atlas of Fatigue Curves written by Howard E. Boyer and published by ASM International. This book was released on 1985-12-31 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains more than 500 fatigue curves for industrial ferrous and nonferrous alloys. Also includes an explanation of fatigue testing and interpretation of test results. Each curve is presented independently and includes an explanation of its particular importance.

Book Fatigue and Durability of Structural Materials

Download or read book Fatigue and Durability of Structural Materials written by Gary R. Halford and published by ASM International. This book was released on 2006 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue and Durability of Structural Materials explains how mechanical material behavior relates to the design of structural machine components. The major emphasis is on fatigue and failure behavior using engineering models that have been developed to predict, in advance of service, acceptable fatigue and other durability-related lifetimes. The book covers broad classes of materials used for high-performance structural applications such as aerospace components, automobiles, and power generation systems. Coverage focuses on metallic materials but also addresses unique capabilities of important nonmetals. The concepts are applied to behavior at room or ambient temperatures; a planned second volume will address behavior at higher-temperatures. The volume is a repository of the most significant contributions by the authors to the art and science of material and structural durability over the past half century. During their careers, including 40 years of direct collaboration, they have developed a host of durability models that are based on sound physical and engineering principles. Yet, the models and interpretation of behavior have a unique simplicity that is appreciated by the practicing engineer as well as the beginning student. In addition to their own pioneering work, the authors also present the work of numerous others who have provided useful results that have moved progress in these fields. This book will be of immense value to practicing mechanical and materials engineers and designers charged with producing structural components with adequate durability. The coverage is appropriate for a range of technical levels from undergraduate engineering students through material behavior researchers and model developers. It will be of interest to personnel in the automotive and off-highway vehicle manufacturing industry, the aeronautical industry, space propulsion and the power generation/conversion industry, the electric power industry, the machine tool industry, and any industry associated with the design and manufacturing of mechanical equipment subject to cyclic loads.

Book Fatigue and Corrosion in Metals

Download or read book Fatigue and Corrosion in Metals written by Pietro Paolo Milella and published by Springer Science & Business Media. This book was released on 2012-10-05 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook, suitable for students, researchers and engineers, gathers the experience of more than 20 years of teaching fracture mechanics, fatigue and corrosion to professional engineers and running experimental tests and verifications to solve practical problems in engineering applications. As such, it is a comprehensive blend of fundamental knowledge and technical tools to address the issues of fatigue and corrosion. The book initiates with a systematic description of fatigue from a phenomenological point of view, since the early signs of submicroscopic damage in few surface grains and continues describing, step by step, how these precursors develop to become mechanically small cracks and, eventually, macrocracks whose growth is governed by fracture mechanics. But fracture mechanics is also introduced to analyze stress corrosion and corrosion assisted fatigue in a rather advanced fashion. The author dedicates a particular attention to corrosion starting with an electrochemical treatment that mechanical engineers with a rather limited knowledge of electrochemistry will well digest without any pain. The electrochemical introduction is considered an essential requirement to the full understanding of corrosion that is essentially an electrochemical process. All stress corrosion aspects are treated, from the generalized film rupture-anodic dissolution process that is the base of any corrosion mechanism to the aggression occurring in either mechanically or thermally sensitized alloys up to the universe of hydrogen embrittlement, which is described in all its possible modes of appearance. Multiaxial fatigue and out-of-phase loading conditions are treated in a rather comprehensive manner together with damage progression and accumulation that are not linear processes. Load spectra are analyzed also in the frequency domain using the Fourier transform in a rather elegant fashion full of applications that are generally not considered at all in fatigue textbooks, yet they deserve a special place and attention. The issue of fatigue cannot be treated without a probabilistic approach unless the designer accepts the shame of one-out-of-two pieces failure. The reader is fully introduced to the most promising and advanced analytical tools that do not require a normal or lognormal distribution of the experimental data, which is the most common case in fatigue. But the probabilistic approach is also used to introduce the fundamental issue of process volume that is the base of any engineering application of fatigue, from the probability of failure to the notch effect, from the metallurgical variability and size effect to the load type effect. Fractography plays a fundamental role in the post mortem analysis of fatigue and corrosion failures since it can unveil the mystery encrypted in any failure.

Book Mechanical Fatigue of Metals

Download or read book Mechanical Fatigue of Metals written by José A.F.O. Correia and published by Springer. This book was released on 2019-05-07 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the XIX International Colloquium on Mechanical Fatigue of Metals, held at the Faculty of Engineering of the University of Porto, Portugal, 5-7 September 2018. This International Colloquium facilitated and encouraged the exchange of knowledge and experiences among the different communities involved in both basic and applied research in the field of the fatigue of metals, looking at the problem of fatigue exploring analytical and numerical simulative approaches. Fatigue damage represents one of the most important types of damage to which structural materials are subjected in normal industrial services that can finally result in a sudden and unexpected abrupt fracture. Since metal alloys are still today the most used materials in designing the majority of components and structures able to carry the highest service loads, the study of the different aspects of metals fatigue attracts permanent attention of scientists, engineers and designers.

Book Metal Fatigue Analysis Handbook

Download or read book Metal Fatigue Analysis Handbook written by Yung-Li Lee and published by Elsevier. This book was released on 2011-08-17 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand why fatigue happens and how to model, simulate, design and test for it with this practical, industry-focused reference Written to bridge the technology gap between academia and industry, the Metal Fatigue Analysis Handbook presents state-of-the-art fatigue theories and technologies alongside more commonly used practices, with working examples included to provide an informative, practical, complete toolkit of fatigue analysis. Prepared by an expert team with extensive industrial, research and professorial experience, the book will help you to understand: Critical factors that cause and affect fatigue in the materials and structures relating to your work Load and stress analysis in addition to fatigue damage-the latter being the sole focus of many books on the topic How to design with fatigue in mind to meet durability requirements How to model, simulate and test with different materials in different fatigue scenarios The importance and limitations of different models for cost effective and efficient testing Whilst the book focuses on theories commonly used in the automotive industry, it is also an ideal resource for engineers and analysts in other disciplines such as aerospace engineering, civil engineering, offshore engineering, and industrial engineering. The only book on the market to address state-of-the-art technologies in load, stress and fatigue damage analyses and their application to engineering design for durability Intended to bridge the technology gap between academia and industry - written by an expert team with extensive industrial, research and professorial experience in fatigue analysis and testing An advanced mechanical engineering design handbook focused on the needs of professional engineers within automotive, aerospace and related industrial disciplines