Download or read book Fatigue Behavior and Residual Stress Stability of Deep rolled Aluminium Alloys AA5083 and AA6110 at Elevated Temperature written by Patiphan Juijerm and published by kassel university press GmbH. This book was released on 2007 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Residual Stresses 2016 written by Thomas M. Holden and published by Materials Research Forum LLC. This book was released on 2017-03-15 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the International Conference on Residual Stresses 10 and is devoted to the prediction/modelling, evaluation, control, and application of residual stresses in engineering materials. New developments, on stress-measurement techniques, on modelling and prediction of residual stresses and on progress made in the fundamental understanding of the relation between the state of residual stress and the material properties, are highlighted. The proceedings offer an overview of the current understanding of the role of residual stresses in materials used in wide ranging application areas.
Download or read book Encyclopedia of Aluminum and Its Alloys Two Volume Set Print written by George E. Totten and published by CRC Press. This book was released on 2018-12-07 with total page 2957 pages. Available in PDF, EPUB and Kindle. Book excerpt: This encyclopedia, written by authoritative experts under the guidance of an international panel of key researchers from academia, national laboratories, and industry, is a comprehensive reference covering all major aspects of metallurgical science and engineering of aluminum and its alloys. Topics covered include extractive metallurgy, powder metallurgy (including processing), physical metallurgy, production engineering, corrosion engineering, thermal processing (processes such as metalworking and welding, heat treatment, rolling, casting, hot and cold forming), surface engineering and structure such as crystallography and metallography.
Download or read book Reliability of Selective Laser Melted AlSi12 Alloy for Quasistatic and Fatigue Applications written by Shafaqat Siddique and published by Springer. This book was released on 2018-09-18 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selective laser melting (SLM) has established itself as the most prominent additive manufacturing (AM) process for metallic structures in aerospace, automotive and medical industries. For a reliable employment of this process, it has to conform to the demanding requirements of these industries in terms of quasistatic and, especially, fatigue performance. Shafaqat Siddique identifies the influence of SLM processing conditions on the microstructural features, and their corresponding influence on the mechanical behavior of the processed AlSi12 alloy structures. The author also gives insight into integrated manufacturing by combining conventional and SLM processes to get the synergic benefits. Requirements for fatigue-resistant designs in additive manufacturing are highlighted, and a novel method is developed for agile fatigue life prediction. About the Author Shafaqat Siddique worked as Scientific Assistant at TU Dortmund University, Department of Materials Test Engineering (WPT), headed by Prof. Dr.-Ing. Frank Walther, and completed his Ph.D. research in cooperation with Laser Zentrum Nord (LZN) in Hamburg. He continues his post-doctoral research at TU Dortmund University, Germany.
Download or read book Aluminium Alloys written by Tibor Kvackaj and published by BoD – Books on Demand. This book was released on 2011-02-04 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book enhances in detail the scope and objective of various developmental activities of the aluminium alloys. A lot of research on aluminium alloys has been performed. Currently, the research efforts are connected to the relatively new methods and processes. We hope that people new to the aluminium alloys investigation will find this book to be of assistance for the industry and university fields enabling them to keep up-to-date with the latest developments in aluminium alloys research.
Download or read book Effects of Deep Rolling and Its Modification on Fatigue Performance of Aluminium Alloy AA6110 written by Patiphan Juijerm and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Variable amplitude Fatigue Tests with Particular Attention to the Effects of High and Low Loads written by Eugene C. Naumann and published by . This book was released on 1962 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deutsche Nationalbibliografie written by Die deutsche Nationalbibliothek and published by . This book was released on 2008 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Properties of Aluminum Alloys written by John Gilbert Kaufman and published by ASM International. This book was released on 2008-01-01 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of data collected and maintained for many years as the property of a large aluminum company, which decided in 1997 to make it available to other engineers and materials specialists. In tabular form, presents data on the tensile and creep properties of eight species of wrought alloys and five species of cast alloys in the various shapes used in applications. Then looks at the fatigue data for several alloys under a range of conditions and loads. The data represent the typical or average findings, and though some were developed years ago, the collection is the largest and most detailed available. There is no index.
Download or read book Fatigue Behavior of A356 Aluminum Alloy written by Phalgun Nelaturu and published by . This book was released on 2016 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal fatigue is a recurring problem for metallurgists and materials engineers, especially in structural applications. It has been responsible for many disastrous accidents and tragedies in history. Understanding the micro-mechanisms during cyclic deformation and combating fatigue failure has remained a grand challenge. Environmental effects, like temperature or a corrosive medium, further worsen and complicate the problem. Ultimate design against fatigue must come from a materials perspective with a fundamental understanding of the interaction of microstructural features with dislocations, under the influence of stress, temperature, and other factors. This research endeavors to contribute to the current understanding of the fatigue failure mechanisms. Cast aluminum alloys are susceptible to fatigue failure due to the presence of defects in the microstructure like casting porosities, non-metallic inclusions, non-uniform distribution of secondary phases, etc. Friction stir processing (FSP), an emerging solid state processing technique, is an effective tool to refine and homogenize the cast microstructure of an alloy. In this work, the effect of FSP on the microstructure of an A356 cast aluminum alloy, and the resulting effect on its tensile and fatigue behavior have been studied. The main focus is on crack initiation and propagation mechanisms, and how stage I and stage II cracks interact with the different microstructural features. Three unique microstructural conditions have been tested for fatigue performance at room temperature, 150 °C and 200 °C. Detailed fractography has been performed using optical microscopy, scanning electron microscopy (SEM) and electron back scattered diffraction (EBSD). These tools have also been utilized to characterize microstructural aspects like grain size, eutectic silicon particle size and distribution. Cyclic deformation at low temperatures is very sensitive to the microstructural distribution in this alloy. The findings from the room temperature fatigue tests highlight the important role played by persistent slip bands (PSBs) in fatigue crack initiation. At room temperature, cracks initiate along PSBs in the absence of other defects/stress risers, and grow transgranularly. Their propagation is retarded when they encounter grain boundaries. Another major finding is the complete transition of the mode of fatigue cracking from transgranular to intergranular, at 200 °C. This occurs when PSBs form in adjacent grains and impinge on grain boundaries, raising the stress concentration at these locations. This initiates cracks along the grain boundaries. At these temperatures, cyclic deformation is no longer microstructure- dependent. Grain boundaries don't impede the progress of cracks, instead aid in their propagation. This work has extended the current understanding of fatigue cracking mechanisms in A356 Al alloys to elevated temperatures.
Download or read book Mechanical Metallurgical and Fatigue Properties of Friction Stir Welded and Tungsten Inert Gas Welded AA6061 T6 Aluminium Alloys written by Akshansh Mishra and published by GRIN Verlag. This book was released on 2017-09-11 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: Project Report from the year 2017 in the subject Engineering - Mechanical Engineering, grade: 8.9, SRM University, language: English, abstract: This paper deals with the mechanical, microstructural and fatigue analysis of welded joints. In the study, 6061-T6 aluminium alloy plates in 4mm thickness, that are particularly used for aerospace and in automotive industries, were welded using Tungsten Inert Gas (TIG) welding and Friction Stir Welding (FSW) methods as similar joints with one side pass and parameters of varying tool rotation, weld speed and 2.3 degree tool tilt angle. The weld zones cross sections were analysed with light optical microscopy (LOM). During recent years several investigations have been made of fatigue properties of friction stir welded joints. The great majority of available data from the fatigue analysis of friction stir welded joints are concerned with uniaxial loading conditions for a simple geometry. In uniaxial loading nominal stress is normally used as reference stress and it is easy to determine. However, fatigue failure is a highly localized phenomenon in engineering components and determining the nominal stress is not always possible due to the complexity of structures and presence of stress concentrators such as notches and cracks in which many approaches based on local parameters.
- Author : F. E. Kiddle
- Publisher :
- Release : 1976
- ISBN : 9780114711214
- Pages : 64 pages
Influence of Prior Heat and Creep on Fatigue in Structural Elements of DTD 5014 RR58 Aluminium Alloy
Download or read book Influence of Prior Heat and Creep on Fatigue in Structural Elements of DTD 5014 RR58 Aluminium Alloy written by F. E. Kiddle and published by . This book was released on 1976 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effects of heat on fatigue have been studied by fatigue tests at ambient temperature on specimens first subjected to a single period of heating with and without steady load applied. The tests employed constant amplitude loading on various structural elements in DTD 5014 (RR58) aluminium alloy material. Heating was applied at temperatures in the range 100 deg C to 170 deg C for times ranging from 1h to 20000h. The initiation of fatigue cracks was significantly affected by heating, particularly at temperatures of 110 deg C and higher when the effects occurred comparatively rapidly. The two mechanisms of importance were changes in microstructure at the machined surface which encouraged initiation, and changes in residual stress by creep which encouraged or discouraged initiation according to the creep being compressive or tensile.
Download or read book Fatigue of Materials III written by T. S. Srivatsan and published by Wiley-TMS. This book was released on 2014-10-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers presented in the third international symposium titled Fatigue of Materials: Advances and Emergences in Understanding held during the Materials Science and Technology 2014 meeting in Pittsburgh, Pennsylvania, USA, in October 2014. The book contains contributions from engineers, technologists, and scientists from academia, research laboratories, and industries. The 19 papers are divided into five topical areas: Session 1: Aluminum Alloys Session 2: Ferrous Materials I Session 3: Ferrous Materials II Session 4: Composite Materials Session 5: Advanced Materials Session 6: Modeling The papers cover a broad spectrum of topics that represent the truly diverse nature of the subject of fatigue as it relates to the world of materials.
Download or read book Fatigue Performance and Crack Growth Behaviour on Cast Aluminium Alloys and a Nickel Based Superalloy and Effects of Compressive Residual Stress written by and published by . This book was released on 2004 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Residual Stress and Fatigue in Cold worked Hard coated 2024 T351 Aluminium Alloy written by David Thomas Asquith and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue Behavior of Weldments in Thick Aluminum Alloys written by Steven Michael Gannon and published by . This book was released on 1974 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Residual Stress and Deformation of Steel written by George E. Totten and published by ASM International. This book was released on 2002 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Examines the factors that contribute to overall steel deformation problems. The 27 articles address the effect of materials and processing, the measurement and prediction of residual stress and distortion, and residual stress formation in the shaping of materials, during hardening processes, and during manufacturing processes. Some of the topics are the stability and relaxation behavior of macro and micro residual stresses, stress determination in coatings, the effects of process equipment design, the application of metallo- thermo-mechanic to quenching, inducing compressive stresses through controlled shot peening, and the origin and assessment of residual stresses during welding and brazing. Annotation c. Book News, Inc., Portland, OR (booknews.com)