Download or read book Faceted Gems A Historical Article on the Methods and Equipment Used in Lapidary written by Richard M. Pearl and published by Read Books Ltd. This book was released on 2014-07-07 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains classic material dating back to the 1900s and before. The content has been carefully selected for its interest and relevance to a modern audience. Carefully selecting the best articles from our collection we have compiled a series of historical and informative publications on the subjects of gemology and crystallography. The titles in this range include "Gemstone Manufacturing" "The Optical Properties of Gemstones and Crystals" "The Thirty-Two Classes of Crystal Symmetry" and many more. Each publication has been professionally curated and includes all details on the original source material. This particular instalment, "Faceted Gems" contains information on the methods and equipment used in lapidary. Intended to illustrate the main features of faceted gems it is a comprehensive guide for anyone wishing to obtain a general knowledge of the subject and to understand the field in its historical context. We are republishing these classic works in affordable, high quality, modern editions, using the original text and artwork.
Download or read book Faceting History Cutting Diamonds and Colored Stones written by Glenn Klein and published by Xlibris Corporation. This book was released on 2005 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author of, "Faceting History: Cutting Diamonds and Colored Stones" has for a long time had a deep interest in learning how the early faceters (cutters) of diamonds and colored gemstones were able to complete their work. What methods did they use? What equipment did they have to make success possible? How soon did they discover how to complete the many phases necessary to accomplish their work? How did the equipment and methods differ between fashioning diamonds and faceting colored stones? These are just a few of the questions that the author wanted to find the answers for. In looking for answers to these and other questions, the author found that there were bits and pieces of information available in many previous books, but there was not a good book available that would answer most of his questions. Upon hearing the author's remarks about this fact, one of the librarians at the wonderful library located at the Gemological Institute of America's Carlsbad campus said that if such a book was not available, "maybe you should write the book!" Well, the author had been thinking of doing just that, but the remark caused the author to see the light and agree to get started on the project. Little did he know then that the project would require many months of eight hour days over seven day weeks to get the book completed. He decided to write a book that would answer these and other related questions that he had. The thought also occurred to him that such a book would be a valuable volume to be placed in libraries of individual faceters around the world. He realized that such a book would also be of great value to anyone who works behind a Jewelry store counter. A successful sales person isone who is knowledgeable about the products that they are selling. A book of faceting information would be extremely valuable if read and re-read from time to time. A customer in the Jewelry store will no doubt be favorably impressed by a sales presentation that is made with the use of interesting and informative information about diamonds and the various colored gemstones. The customer will be convinced that the sales person knows about what they are talking. The author has spent nearly three years on the project of researching the GIA library and other libraries, along with the extensive personal library of gemstone related books that he personally possesses. Many conflicting reports were noted in his study. He has made the statements in his book reflect the most commonly accepted opinions, of the most respected authors' works that he has found in his research. History is only obtainable from the earlier works of other authors. We cannot go back to the long past centuries ourselves, to see first hand what really happened and when it happened. A study of faceting history requires making the best choices of the information that is available. This completed book answers questions as to why the fashioning of diamonds was/is so different from the faceting of colored gemstones. The book compares the needed equipment and the methods that have brought the greatest successes. In addition, a great deal of other information connected to faceting is included. There are seven chapters in the book and there are over 125 photographs of the early equipment and methods that were used. The photographs show the faceters, the workroom conditions, and the tools and equipment that they used to completebeautiful and lasting gemstones. The book chapters are titled: An Introduction to Faceting, Early Man's Stone Appreciation, Diamond Fashioning Procedure and Equipment, Colored Stone Faceting Procedure and Equipment, The Evolution of Cut Designs, Famous and Historic Gemstones, Sources of Diamond and Colored Stone Rough, and lastly, Advances in Faceting Over the Past One Hundred Years. Within each of these chapters the reader will find a multitude of additional and interesting information. Chapter One: Early Faceting Inform
Download or read book Gemstone Facet Cutting A Collection of Historical Articles on Methods and Equipment Used for Working Gems written by Various and published by Read Books Ltd. This book was released on 2016-08-26 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains classic material dating back to the 1900s and before. The content has been carefully selected for its interest and relevance to a modern audience. Carefully selecting the best articles from our collection we have compiled a series of historical and informative publications on the subjects of gemology and crystallography. The titles in this range include "Gemstone Manufacturing" "The Optical Properties of Gemstones and Crystals" "The Thirty-Two Classes of Crystal Symmetry" and many more. Each publication has been professionally curated and includes all details on the original source material. This particular instalment, "Gemstone Facet Cutting" contains information on the methods and equipment of the gem cutter. Intended to illustrate the main aspects of facet cutting it is a comprehensive guide for anyone wishing to obtain a general knowledge of the subject and to understand the field in its historical context. We are republishing these classic works in affordable, high quality, modern editions, using the original text and artwork.
Download or read book Cutting and Polishing Gemstones A Collection of Historical Articles on the Methods and Equipment Used for Working Gems written by Various and published by Read Books Ltd. This book was released on 2014-07-07 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains classic material dating back to the 1900s and before. The content has been carefully selected for its interest and relevance to a modern audience. Carefully selecting the best articles from our collection we have compiled a series of historical and informative publications on the subjects of gemology and crystallography. The titles in this range include "Gemstone Manufacturing" "The Optical Properties of Gemstones and Crystals" "The Thirty-Two Classes of Crystal Symmetry" and many more. Each publication has been professionally curated and includes all details on the original source material. This particular instalment, "Cutting and Polishing Gemstones" contains information on the methods and equipment of the gem cutter. Intended to illustrate the main aspects of cutting and polishing it is a comprehensive guide for anyone wishing to obtain a general knowledge of the subject and to understand the field in its historical context. We are republishing these classic works in affordable, high quality, modern editions, using the original text and artwork.
Download or read book The Cutting Setting and Engraving of Precious Stones A Historical Article on Working Gemstones written by Louis Dieulafait and published by Read Books Ltd. This book was released on 2014-07-07 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains classic material dating back to the 1900s and before. The content has been carefully selected for its interest and relevance to a modern audience. Carefully selecting the best articles from our collection we have compiled a series of historical and informative publications on the subjects of gemology and crystallography. The titles in this range include "Gemstone Manufacturing" "The Optical Properties of Gemstones and Crystals" "The Thirty-Two Classes of Crystal Symmetry" and many more. Each publication has been professionally curated and includes all details on the original source material. This particular instalment, "The Cutting, Setting and Engraving of Precious Stones" contains information on the methods and equipment of the gem cutter. Intended to illustrate the main aspects of working gems it is a comprehensive guide for anyone wishing to obtain a general knowledge of the subject and to understand the field in its historical context. We are republishing these classic works in affordable, high quality, modern editions, using the original text and artwork.
Download or read book Cabochon Cutting A Collection of Historical Articles on the Methods and Equipment Used for Working Gemstones written by Various and published by Read Books Ltd. This book was released on 2015-05-06 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains classic material dating back to the 1900s and before. The content has been carefully selected for its interest and relevance to a modern audience. Carefully selecting the best articles from our collection we have compiled a series of historical and informative publications on the subjects of gemology and crystallography. The titles in this range include "Gemstone Manufacturing" "The Optical Properties of Gemstones and Crystals" "The Thirty-Two Classes of Crystal Symmetry" and many more. Each publication has been professionally curated and includes all details on the original source material. This particular instalment, "Cabochon Cutting" contains information on the methods and equipment of the gem cutter. Intended to illustrate the main aspects of cabochon cutting it is a comprehensive guide for anyone wishing to obtain a general knowledge of the subject and to understand the field in its historical context. We are republishing these classic works in affordable, high quality, modern editions, using the original text and artwork.
- Author : Various
- Publisher : Sutton Press
- Release : 2011-07
- ISBN : 9781447420149
- Pages : 292 pages
Cutting Gemstones A Collection of Historical Articles on the Methods and Equipment of the Gem Cutter
Download or read book Cutting Gemstones A Collection of Historical Articles on the Methods and Equipment of the Gem Cutter written by Various and published by Sutton Press. This book was released on 2011-07 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains classic material dating back to the 1900s and before. The content has been carefully selected for its interest and relevance to a modern audience. Carefully selecting the best articles from our collection we have compiled a series of historical and informative publications on the subjects of gemology and crystallography. The titles in this range include "Gemstone Manufacturing" "The Optical Properties of Gemstones and Crystals" "The Thirty-Two Classes of Crystal Symmetry" and many more. Each publication has been professionally curated and includes all details on the original source material. This particular instalment, "Cutting Gemstones" contains information on the methods and equipment of the gem cutter. Intended to illustrate the main aspects of gem cutting it is a comprehensive guide for anyone wishing to obtain a general knowledge of the subject and to understand the field in its historical context. We are republishing these classic works in affordable, high quality, modern editions, using the original text and artwork.
Download or read book The Craft of Jewellery Making A Collection of Historical Articles on Tools Gemstone Cutting Mounting and Other Aspects of Jewellery Making written by Various and published by Read Books Ltd. This book was released on 2013-05-31 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains classic material dating back to the 1900s and before. The content has been carefully selected for its interest and relevance to a modern audience. Carefully selecting the best articles from our collection we have compiled a series of historical and informative publications on the subjects of gemology and crystallography. The titles in this range include "Gemstone Manufacturing" "The Optical Properties of Gemstones and Crystals" "The Thirty-Two Classes of Crystal Symmetry" and many more. Each publication has been professionally curated and includes all details on the original source material. This particular instalment, "The Craft of Jewellery Making" contains information on tools, cutting, mounting and much more. Intended to illustrate the main aspects of jewellery making it is a comprehensive guide for anyone wishing to obtain a general knowledge of the subject and to understand the field in its historical context. We are republishing these classic works in affordable, high quality, modern editions, using the original text and artwork.
Download or read book Faceting History Cutting Diamonds and Colored Stones written by Glenn Klein and published by Xlibris Corporation. This book was released on 2005-10-13 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author of, "FACETING HISTORY: CUTTING DIAMONDS AND COLORED STONES" has for a long time had a deep interest in learning how the early faceters (cutters) of diamonds and colored gemstones were able to complete their work. What methods did they use? What equipment did they have to make success possible? How soon did they discover how to complete the many phases necessary to accomplish their work? How did the equipment and methods differ between fashioning diamonds and faceting colored stones? These are just a few of the questions that the author wanted to find the answers for. In looking for answers to these and other questions, the author found that there were bits and pieces of information available in many previous books, but there was not a good book available that would answer most of his questions. Upon hearing the author ́s remarks about this fact, one of the librarians at the wonderful library located at the Gemological Institute of America ́s Carlsbad campus said that if such a book was not available, "maybe you should write the book!" Well, the author had been thinking of doing just that, but the remark caused the author to see the light and agree to get started on the project. Little did he know then that the project would require many months of eight hour days over seven day weeks to get the book completed. He decided to write a book that would answer these and other related questions that he had. The thought also occurred to him that such a book would be a valuable volume to be placed in libraries of individual faceters around the world. He realized that such a book would also be of great value to anyone who works behind a Jewelry store counter. A successful sales person is one who is knowledgeable about the products that they are selling. A book of faceting information would be extremely valuable if read and re-read from time to time. A customer in the Jewelry store will no doubt be favorably impressed by a sales presentation that is made with the use of interesting and informative information about diamonds and the various colored gemstones. The customer will be convinced that the sales person knows about what they are talking. The author has spent nearly three years on the project of researching the GIA library and other libraries, along with the extensive personal library of gemstone related books that he personally possesses. Many conflicting reports were noted in his study. He has made the statements in his book reflect the most commonly accepted opinions, of the most respected authors ́ works that he has found in his research. History is only obtainable from the earlier works of other authors. We cannot go back to the long past centuries ourselves, to see first hand what really happened and when it happened. A study of faceting history requires making the best choices of the information that is available. This completed book answers questions as to why the fashioning of diamonds was/is so different from the faceting of colored gemstones. The book compares the needed equipment and the methods that have brought the greatest successes. In addition, a great deal of other information connected to faceting is included. There are seven chapters in the book and there are over 125 photographs of the early equipment and methods that were used. The photographs show the faceters, the workroom conditions, and the tools and equipment that they used to complete beautiful and lasting gemstones. The book chapters are titled: An Introduction to Faceting, Early Man ́s Stone Appreciation, Diamond Fashioning Procedure and Equipment, Colored Stone Faceting Procedure and Equipment, The Evolution of Cut Designs, Famous and Historic Gemstones, Sources of Diamond and Colored Stone Rough, and lastly, Advances in Faceting Over the Past One Hundred Years. By books end, the reader will be well informed as to what is r
Download or read book Gem Cutting written by John Sinkankas and published by . This book was released on 1962 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: For over half a century, Gem Cutting has served as the go-to guide for beginners and experts alike. Offering a wealth of information for everyone, it starts with the fundamentals and leads logically to techniques and projects that will challenge even the most advanced cutter. Every step is described in detail and illustrated with drawings and photographs. Sinkankas covers common pitfalls and, wherever possible, offers hints on how to take money-saving shortcuts. Incorporating tips on operating equipment for greatest efficiency, he explains how to make or choose equipment for sawing, grinding, sanding, and other basic operations. Special chapters describe how to cut and polish cabochons, faceted gems, spheres and beads; how to tumble gems; and how to make carvings, engravings, inlays, and mosaics.
Download or read book Handbook for the Amateur Lapidary written by James Harry Howard and published by Ravenio Books. This book was released on 1935 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Man was cutting, carving and polishing gems long before he began to leave written records of his doings. Many Museums have countless examples of the lapidary work done by those artisans and artists, who wrought from raw materials, with exceedingly primitive equipment, objects of art that our modern workers would be hard taxed to surpass. Today, in the Far East, native artisans with hand or foot driven wheels are producing perfect polishes on difficult gems, showing workmanship of which we amateurs with full complement of tools may well be envious. Gem cutting is only one of many arts that are old. Ceramics, wood working, metal working and so forth are old arts. The thing that is peculiar is that these other arts all have their extensive literatures. One may go to any public library and find many volumes on any of these subjects except gem cutting. These volumes are all-revealing, authoritative and detailed. But the subject of gem cutting is shrouded in mystery. Few have written even in generalities on the subject. The Author, several years ago, conducted a search for such literature. He found absolutely nothing. Much later he learned of and borrowed, a copy of Oliver Byrnes, “Handbook for the Mechanic, Artisan and Engineer” and found in it an exceedingly interesting chapter on gem cutting. But the volume was written about 75 years ago, probably had a very limited circulation, was never reprinted, and not one library in fifty ever heard of it. That is the only volume the Author has ever found that treats even briefly of gem cutting. This excludes of course such texts as “The Gem Cutters Craft” by Leopold Cleremont which have chapters on the technique of cutting, but that treat of it so generally that they cannot be used as instructions. The art for some reason has always been passed down from generation to generation by apprenticeship only. When the Author began the above mentioned investigation he was told “The cutting of gems can be learned only through an apprenticeship.” There is no desire here to picture the art as an easy one to learn nor to minimize the skill that is shown by the work of the professional lapidaries, nor to intimate that the professional could, if he would, reveal all his secrets in one brief volume. The desire is to lift the cloud of mystery that has always surrounded the operation and show that actually there is nothing mysterious in the practices of the profession, but only certain basic rules, which, if obeyed, will bring definite results. It is hoped that the instructions herein given are sufficiently explicit that the beginner in the work will have no especial difficulties. It is hoped also that they are not so tedious but that they will be readable by those who do not propose to cut gems but who are, nevertheless, interested in the operation.
Download or read book Revised Lapidary Handbook written by James Harry Howard and published by Ravenio Books. This book was released on 2015-11-04 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This resource is organized as follows: I. Sawing The Diamond Saw Speed Lubricant Making a Diamond Saw General Notes on Diamond Sawing Mud Sawing The Silicon Carbide Saw Wire Sawing Band Sawing II. Cabochon Cutting Cutting and Polishing Outlining Flatting the Base Cementing Technique No. 1 Technique No. 2 Finishing the Front General Notes Special Treatments III. Large Flats IV. Gem Drilling Tube Drills The Diamond Pointed Dbill The Rod Drill Notes V. Bead Making Alternate Method-Bead Drilling Notes Rough Shaping the Beads VI. Cutting Faceted Gems VII. Advanced Facet Cutting Choosing a Cut VIII. The Optics of Brilliants IX. Mosaics X. Impregnation of Gem Materials XI. The Artificial Coloring of Agates XII. Soft Carving (With Steel Tools) XIII. Carving and Engraving Hard Materials XIV. Sphere Making XV. Bracelets and Rings XVI. Cutting Gems by Hand XVII. Diamond as Abrasive XVIII. Cutting of Diamonds XIX. Miscellaneous Useful Information
Download or read book Description of the Lapidary s Portable Apparatus for Cutting Slitting and Polishing Crystal Jasper Agate Chalcedony and Precious Stones written by John Mawe and published by . This book was released on 1827 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Lapidary Journal written by and published by . This book was released on 1970 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction To Lapidary written by Pansy D. Kraus and published by Krause Publications. This book was released on 2007-09-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative introduction to all aspects of lapidary is provided here by Pansy Kraus. She describes the processes, tools, and equipment of each branch of this fascinating hobby, helping the reader choose a technique, get started the right way, and determine which tools will work best to achieve specific results. &break;&break;Kraus describes the considerable rewards of tumbling rocks, making cabochons, carving gem materials, lapping, cutting spheres, making beads, and faceting. She provides a coherent overview of a vast and complex field, from the elements of getting started to studio visits with lapidary artist, where we discover what may be possible. &break;&break;Olive M. Colhour produces breathtaking Florentine pietre dure portraits by color-matching stones to paintings. Then, she cuts and polishes each rock separately before assembling her sculptured mosaics. &break;&break;Jerry Muchna facets three-dimensional quartz sculptures. His "Great Moments in America" series includes The Spirit of St. Louis, with 695 facets, and Iwo Jima, with 6,511 facets. &break;&break;Hing Wa Lee combines traditional Chinese technique - using a fixed shaft with a foot treadle - with the use of a modern flex shaft to produce carvings of astonishing intricacy. Working with traditional jadeite and nephrite - as well as more unusual materials, such as sugilite - he achieves a unique blend of antiquity and modernity. &break;&break;Their work is shown in 27 exciting color plates, along with that of other artists featured in the studio visits.
Download or read book The Art of Gem Cutting written by Fred S. Young and published by Codman Press. This book was released on 2011-06 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: The working of rough materials into useful tools, weapons, and ornaments dates back to time immemorial. It is known that man lived in the stone age for thousands of years, when the only useful tools and weapons available were those which could be fashioned from the minerals and rocks provided by Nature. At least one hundred thousand years ago primitive man first learned the art of working an edge or point on some hard mineral, to be used as a tool or weapon. Later came the development of the lapidary art for the production of ornaments, and, ever since, precious stones have been an important part of human culture. Contained within this fascinating book is an interesting and informative treatise on gem-cutting, detailing its history, development, and modern application. A perfect book for anyone interested in the subject, this book will also make a great addition to any collection of gemmological literature. The sections of this book are: Cabochon Cutting, Facet Cutting, and Gemmology, each containing detailed subchapters within. We are proud to republish this scarce antiquarian book complete with a new introduction to the subject.
Download or read book Amateur Gemstone Faceting Volume 1 written by Tom Herbst and published by Facetable Books. This book was released on 2014-11-23 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amateur faceter Tom Herbst lays out the steps necessary to transform a shapeless lump of rock into a glittering jewel that is unique and valuable. Along the way, he explains not only the "how" but also the "why," and provides helpful tips in dealing with many of the pitfalls that confront the beginning gem cutter.