Download or read book Biomaterials Fabrication and Processing Handbook written by Paul K. Chu and published by CRC Press. This book was released on 2008-03-27 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on a variety of production and processing aspects of the latest biomaterials. It discusses how scaffolds are used in tissue engineering and describes common implant materials, such as hard tissue, blood contacting, and soft tissue. The book also examines the important role nanotechnology plays in the preparation of drugs, protein delivery, tissue engineering, cardiovascular biomaterials, hard tissue replacements, biosensors, and bio-MEMS. With contributions from renowned international experts and extensive reference lists in each chapter, this book provides detailed, practical information to produce biomaterials and employ them in biomedicine.

Download or read book Protein Architecture written by Lvov/Mohwald and published by CRC Press. This book was released on 1999-09-29 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considers the design, structure and biological activity of ordered films comprised of proteins, polymers, amphiphile molecules and colloidal particles, and assesses the ability of protein/polyion multilayers to mimic living organelles. The book discusses how to reach predetermined locations with proteins and orient molecules while preserving their bioactivity.

Download or read book Nanoscale Fabrication Optimization Scale up and Biological Aspects of Pharmaceutical Nanotechnology written by Alexandru Mihai Grumezescu and published by William Andrew. This book was released on 2017-12-11 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale Fabrication, Optimization, Scale-up and Biological Aspects of Pharmaceutical Nanotechnology focuses on the fabrication, optimization, scale-up and biological aspects of pharmaceutical nanotechnology. In particular, the following aspects of nanoparticle preparation methods are discussed: the need for less toxic reagents, simplification of the procedure to allow economic scale-up, and optimization to improve yield and entrapment efficiency. Written by a diverse range of international researchers, the chapters examine characterization and manufacturing of nanomaterials for pharmaceutical applications. Regulatory and policy aspects are also discussed. This book is a valuable reference resource for researchers in both academia and the pharmaceutical industry who want to learn more about how nanomaterials can best be utilized. - Shows how nanomanufacturing techniques can help to create more effective, cheaper pharmaceutical products - Explores how nanofabrication techniques developed in the lab have been translated to commercial applications in recent years - Explains safety and regulatory aspects of the use of nanomanufacturing processes in the pharmaceutical industry

Download or read book Polyelectrolytes and Nanoparticles written by Joachim Koetz and published by Springer Science & Business Media. This book was released on 2007-02-20 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This lab manual guides chemists through demonstrations of synergistic effects between polyelectrolytes and nanoparticles. After a short introduction into the field of polyelectrolytes and polyelectrolyte characterization, the book discusses the role of polyelectrolytes in the process of nanoparticle formation. The book also explains methods for characterization of the polyelectrolyte-modified nanoparticles.

Download or read book Design and Applications of Nanostructured Polymer Blends and Nanocomposite Systems written by Sabu Thomas and published by William Andrew. This book was released on 2015-09-22 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Applications of Nanostructured Polymer Blend and Nanocomposite Systems offers readers an intelligent, thorough introduction to the design and applications of this new generation of designer polymers with customized properties. The book assembles and covers, in a unified way, the state-of-the-art developments of this less explored type of material. With a focus on nanostructured polymer blends, the book discusses the science of nanostructure formation and the potential performance benefits of nanostructured polymer blends and composites for applications across many sectors: electronics, coatings, adhesives, energy (photovoltaics), aerospace, automotive, and medical devices (biocompatible polymers). The book also describes the design, morphology, and structure of nanostructured polymer composites and blends to achieve specific properties. - Covers all important information for designing and selecting the right nanostructured polymer system - Provides specialized knowledge on self-repairing, nanofibre and nanostructured multiphase materials, as well as evaluation and testing of nanostructured polymer systems - Serves as a reference guide for development of new products in industries ranging from electronics, coatings, and energy, to transport and medical applications - Describes the design, morphology, and structure of nanostructured polymer composites and blends to achieve specific properties

Download or read book Responsive Polymer Surfaces written by Danqing Liu and published by John Wiley & Sons. This book was released on 2017-07-20 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adopting an integrated approach, this book covers experiments, theory, and emerging applications. In the first part surfaces are described that change from flat to either a random corrugated or to a well-structured structure, while the second part deals with those surface structures integrated in the coating surface where the structures change their shape or dimension when addressed by an external trigger. A variety of materials are addressed, including liquid crystal polymers, hydrogels, hard acrylates, and soft silicones. The whole is rounded off by a discussion of various applications, including surface controlled flows in microfluidic systems. Of interest to chemists and engineers, researchers in industry and academia, as well as those working in the paint industry and hydrodynamics.

Download or read book Chemical Physics of Thin Film Deposition Processes for Micro and Nano Technologies written by Y. Pauleau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date collection of tutorial papers on the latest advances in the deposition and growth of thin films for micro and nano technologies. The emphasis is on fundamental aspects, principles and applications of deposition techniques used for the fabrication of micro and nano devices. The deposition of thin films is described, emphasising the gas phase and surface chemistry and its effects on the growth rates and properties of films. Gas-phase phenomena, surface chemistry, growth mechanisms and the modelling of deposition processes are thoroughly described and discussed to provide a clear understanding of the growth of thin films and microstructures via thermally activated, laser induced, photon assisted, ion beam assisted, and plasma enhanced vapour deposition processes. A handbook for engineers and scientists and an introduction for students of microelectronics.

Download or read book Alginate Biomaterial written by Sougata Jana and published by Springer Nature. This book was released on 2023-01-31 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on recent trends of research on alginate-based biomaterials in Drug Delivery strategies and biomedical engineering. It contains the widely used alginate-based biomaterials as micro to nano-controlled drug delivery (oral, ocular delivery, topical delivery, etc.) and its fabrication technology, characterization, and biomedical aspects (such as cancer therapy, tissue engineering, gene delivery, vaccine delivery, enzyme immobilization, wound healing, dental applications, etc.) in a single book. The chapters cover updated information, current research trends, informatics, and all aspects of applications. Alginate is a U.S. Food and Drug Administration (FDA)-approved natural biomaterial and has diverse biomedical applications. In recent years, researchers and scientists are working on the alginate-based drug delivery systems that have been designed and characterized as a matrix, micro to nanocarriers, fibers, composite/scaffolds, etc. Alginate has versatile properties such as biodegradable, biocompatible, nontoxic, and easily available. This book especially highlights both the drug delivery strategies and biomedical engineering aspects such as controlled drug delivery, drug targeting to the site of action, cancer therapy, gene and vaccine delivery, enzyme immobilization, tissue engineering, and regenerative medicine.

Download or read book Fabrication and characterisation of multilayer thin film using self assembly of colloidal gold and silica nanoparticles written by Zaheer Abbas Khan and published by GRIN Verlag. This book was released on 2016-06-20 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doctoral Thesis / Dissertation from the year 2011 in the subject Materials Science, Asian Insitute of Technology, language: English, abstract: A novel approach of multilayered thin film based on layer-by-layer deposition using colloidal nanoparticles was carried out in this work. The films were made by the self-assembly of oppositely charged metal and dielectric nanoparticles, alternately capped with polymers. Synthesized colloidal suspensions of gold nanoparticles (~20nm) and silica nanoparticles (~30nm) were used as the building blocks for the self-organisation of the films. Capping with PDDA and chitosan was used effectively to control the optical absorption of the surface plasmon resonance peaks of the gold nanoparticles. Using different combinations of layer formation, absorption characteristics in the near-ultraviolet (NUV), green and blue region were controlled through capping and varying the thickness of the film. Capping with chitosan or PDDA reduced the absorption peak of the coated silica nanoparticles in a similar fashion. Peak absorption in the UV range was achieved by assembling bare silica nanoparticles layers onto layers of gold nanoparticles. Transmission color was controlled (less than 1% color distance per added bi-layer) by changing the film thickness. Optical modeling of multilayer thin films constructed with oppositely charged nanoparticles helped us to understand phenomenon such as surface plasmon resonance, absorbance, transmittance and reflectance. Maxwell-Garnett effective medium theory in this case is applied in quasi-static limit to multilayer composite consisting of host material silica and inclusion material gold nanoparticles. Maxwell Garnett optical simulations is correlated with experimental spectra obtained for the thin film composites. The thickness of layers, size and spacing of metal inclusion is varied to alter the optical properties for the required device applications. The multilayered thin film of gold and silica resembles a structure consisting of large charge sheets of metal separated by a dielectric layer. When the applied electric potential reaches a threshold value, it drives the electrons to tunnel through the charge sheets producing a rectification effect. Therefore current-voltage measurements of the multilayer thin films were performed to calculate the threshold voltages. The electrical capacitance in these multilayer devices was modified with the change in thickness of the dielectric layers between two conducting layers and calculated by capacitance-voltage measurements of multilayer stack. [...]

Download or read book Application of Nanotechnology in Membranes for Water Treatment written by Alberto Figoli and published by CRC Press. This book was released on 2017-07-14 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on Application of Nanotechnology in Membranes for Water Treatment but not only provides a series of innovative solutions for water reclamation through advanced membrane technology but also serves as a medium to promote international cooperation and networking for the development of advanced membrane technology for Universal well-being and to achieve the common goal of supplying economically, environmentally and societally sustainable freshwater and better sanitation systems. This book is unique because the chapters were authored by established researchers all around the globe based on their recent research findings. In addition, this book provides a holistic coverage of membrane development for water treatment, from the membrane preparation and characterizations to the performance for specific processes and applications. Since that water scarcity has become a global risk and one of the most serious challenges for the scientific community in this century, the publication of this book is therefore significant as it will serve as a medium for a good reference of an alternative solution in water reclamation. This book will provide the readers with a thorough understanding of the different available approaches for manufacturing membranes both with innovative polymeric systems and inorganic nano-materials which could give enhanced functionalities, catalytic and antimicrobial activities to improve the performance of the existing membranes. It will be useful for leading decision and policy makers, water sector representatives and administrators, policy makers from the governments, business leaders, business houses in water treatment, and engineers/ scientists from both industrialized and developing countries as well.

Download or read book Emerging Sources and Applications of Alternative Proteins written by and published by Academic Press. This book was released on 2022-08-05 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Protein nutrition and sustainability is a global challenge. Emerging Sources and Applications of Food Proteins provides the latest progresses about research and applications of emerging alternative proteins. Topics covered in this volume include rapeseed (canola) proteins, pulse proteins, insect proteins, fungal proteins, artificial meat, and new applications in bioactive peptides, nanotechnology, 3D printing, meat alternatives, with a focus on the consumer trend and practical applications. - Focuses only on emerging sources of food proteins that are key to sustain the global protein nutrition - Written by invited experts with years of hands-on experience on the field - Provides the latest advancements of research and application of emerging sources of food proteins - Aims to inspire new protein products development using emerging sources of food proteins

Download or read book Bottom up Nanofabrication Applications written by Katsuhiko Ariga and published by American Scientific Publishers. This book was released on 2009 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Glycopolymers Polyelectrolyte Multilayers for Biomedical Applications written by and published by Scholar Press. This book was released on 2018-01-16 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theoretical background of this work is concerning with the drug loaded polyelectrolyte multilayers (PEM) modified by the host-guest interaction of biocompatible hyperbranched core-shell glycopolymers. The glycopolymer in this work is the hyperbranched polyethyleneimine that was modified with maltose moieties using reductive amination. Thus, the use of glycohyperbranched polymers for drug delivery would allow the avoid naturally occurring drug resistance due to decreased transporter activity. Concerning preparative method, PEM was fabricated using layer-by-layer (LbL) processes involve the sequential deposition of two polyions that physically bond together. Control was taken on the stoichiometric ratio related to cationic and anionic repeating units, which was chosen close to zero for the final applied PEM. Concerning analytical methods, a couple of physical-chemical methods were applied to characterize colloid stability, adhesiveness, drug loading and release of fabricated PEM. In conclusion, a highly sable and sustainable PEM coats on a surface of an activated solid substrate has been fabricated with an efficient ability to recycle the charged molecule for more than 24 times.

Download or read book Nanocomposites of Polymers and Inorganic Nanoparticles written by Walter Remo Caseri and published by MDPI. This book was released on 2021-03-25 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue deals with the fascinating material class of nanocomposites consisting of extremely small particles (nanoparticles) which are embedded in polymers. Such materials are of paramount interest in various disciplines, especially chemistry, physics, biomedicine and materials science. Due to the diversity of the components of nanocomposites, they provide a broad spectrum of material properties and applications. The versatility of nanocomposites is indeed reflected by the research covered in this Special Issue. The field of nanocomposites includes innovative science and a source of inspiration for currently relevant economic topics as well as for envisaged technologies of the future. Indeed, this volume alludes to strategies for the preparation of nanocomposites and possibilities for a variety of applications, such as catalytic reactions, gas barriers, high refractive index materials, corrosion protection, electromagnetic inference (EMI) shielding, lithium ion batteries, tissue engineering and plastic surgery.

Download or read book Biopolymers in Pharmaceutical and Food Applications 2 Volumes written by Sougata Jana and published by John Wiley & Sons. This book was released on 2024-10-01 with total page 983 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revolutionize the search for sustainable industry with these biodegradable materials The search for biodegradable materials has become an increasingly essential component of the global response to climate change and the urgent need for more sustainable industrial processes. Biodegradable polymers, either synthetic or natural, have become an explosive research subject as their applications in food, medicinal, and pharmaceutical industries become more and more apparent. There is an urgent need for chemists and other professionals working in these industries to understand the range of available biopolymers and how to use them. Biopolymers in Pharmaceutical and Food Applications presents an overview of all currently-known food-safe polymers and their applications for food and pharmaceutical technology. Its grasp of recent sustainable trends in biopolymer production and distribution make it a one-stop shop for researchers and industry professionals looking to understand the future of sustainable food production, pharmaceutical and cosmetic applications. Comprehensive and accessible, it has never been timelier as a contribution to these key industries. Readers of the two volumes of Biopolymers in Pharmaceutical and Food Applications will also find: Treatment of biopolymers including collagen, chitosan, carrageenan, and more Detailed discussion of drug delivery systems incorporating plant- and animal-based biopolymers An editor with extensive research and teaching experience in biopolymer and pharmaceutical research Biopolymers in Pharmaceutical and Food Applications is ideal for polymer chemists, pharmaceutical chemists, food scientists, and any other researcher looking to work with biodegradable polymers.

Download or read book Advanced Materials in Drug Release and Drug Delivery Systems written by Katarzyna Winnicka and published by MDPI. This book was released on 2021-09-03 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Development of new drug molecules is costly and requires longitudinal, wide-ranging studies; therefore, designing advanced pharmaceutical formulations for existing and well-known drugs seems to be an attractive device for the pharmaceutical industry. Properly formulated drug delivery systems can improve pharmacological activity, efficacy and safety of the active substances. Advanced materials applied as pharmaceutical excipients in designing drug delivery systems can help solve problems concerning the required drug release—with the defined dissolution rate and at the determined site. Novel drug carriers enable more effective drug delivery, with improved safety and with fewer side effects. Investigations concerning advanced materials represent a rapidly growing research field in material/polymer science, chemical engineering and pharmaceutical technology. Exploring novel materials or modifying and combining existing ones is now a crucial trend in pharmaceutical technology. Eleven articles included in the the Special Issue “Advanced Materials in Drug Release and Drug Delivery Systems” present the most recent insights into the utilization of different materials with promising potential in drug delivery and into different formulation approaches that can be used in the design of pharmaceutical formulations.

Download or read book Polymer Capsules written by Ye Liu and published by CRC Press. This book was released on 2019-05-10 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are one of the most versatile and important materials used for capsule preparation despite various others available. Suitably formulated capsules can securely protect ingredients, deliver them to targeted sites, and release them expeditiously, improving functions and minimizing adverse effects. New polymers are constantly being explored to develop more efficient capsules as they are routinely used in pharmaceuticals, consumer healthcare products, nutrients, and food. This book focuses on the current state of the art of polymer-based capsules and delivery systems. It describes the formulation processes of capsules developed from redox-responsive polymers and polymer-functionalized carbon nanotubes, in addition to shedding light on coacervation of polymers for encapsulation. It reviews different active ingredients that can be used with polymer capsules in various products, encapsulation of essential oils using such capsules, and development of polymer capsules of cells and bacteriophages.