Download or read book Fabrication of Functionally Gradient Materials with Internal Channels in Ceramics and Ceramic Composites written by Hyea-Weon Shin and published by . This book was released on 2002 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramics and Composites Processing Methods written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2012-04-17 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the latest processing and fabrication methods There is increasing interest in the application of advanced ceramic materials in diverse areas such as transportation, energy, environmental protection and remediation, communications, health, and aerospace. This book guides readers through a broad selection of key processing techniques for ceramics and their composites, enabling them to manufacture ceramic products and components with the properties needed for various industrial applications. With chapters contributed by internationally recognized experts in the field of ceramics, the book includes traditional fabrication routes as well as new and emerging approaches in order to meet the increasing demand for more reliable ceramic materials. Ceramics and Composites Processing Methods is divided into three sections: * Densification, covering the fundamentals and practice of sintering, pulsed electric current sintering, and viscous phase silicate processing * Chemical Methods, examining colloidal methods, sol-gel, gel casting, polymer processing, chemical vapor deposition, chemical vapor infiltration, reactive melt infiltration, and combustion synthesis * Physical Methods, including directional solidification, solid free-form fabrication, microwave processing, electrophoretic deposition, and plasma spraying Each chapter focuses on a particular processing method or approach. Collectively, these chapters offer readers comprehensive, state-of-the-science information on the many approaches, techniques, and methods for the processing and fabrication of advanced ceramics and ceramic composites. With its coverage of the latest processing methods, Ceramics and Composites Processing Methods is recommended for researchers and students in ceramics, materials science, structural materials, biomedical engineering, and nanotechnology.
Download or read book Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II written by Tatsuki Ohji and published by John Wiley & Sons. This book was released on 2009-02-11 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a one-stop resource, compiling current research on advanced processing and manufacturing technologies for structural and multifunctional materials. It is a collection of papers from The American Ceramic Society s 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008. Topics include advanced processing and manufacturing technologies for a wide variety of non-oxide and oxide based structural ceramics, ultra-high temperature ceramics and composites, particulate and fiber reinforced composites, and multifunctional materials. This is a valuable, up-to-date resource for researchers in the field.
Download or read book Advances in High Temperature Ceramic Matrix Composites and Materials for Sustainable Development written by Mrityunjay Singh and published by John Wiley & Sons. This book was released on 2017-06-22 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global population growth and tremendous economic development has brought us to the crossroads of long-term sustainability and risk of irreversible changes in the ecosystem. Energy efficient and ecofriendly technologies and systems are critically needed for further growth and sustainable development. While ceramic matrix composites were originally developed to overcome problems associated with the brittle nature of monolithic ceramics, today the composites can be tailored for customized purposes and offer energy efficient and ecofriendly applications, including aerospace, ground transportation, and power generation systems. The 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC 9) was held in Toronto, Canada, June 26-30, 2016 to discuss challenges and opportunities in manufacturing, commercialization, and applications for these important material systems. The Global Forum on Advanced Materials and Technologies for Sustainable Development (GFMAT 2016) was held in conjunction with HTCMC 9 to address key issues, challenges, and opportunities in a variety of advanced materials and technologies that are critically needed for sustainable societal development. This Ceramic Transactions volume contains a collection of peer reviewed papers from the 16 below symposia that were submitted from these two conferences Design and Development of Advanced Ceramic Fibers, Interfaces, and Interphases in Composites- A Symposium in Honor of Professor Roger Naslain Innovative Design, Advanced Processing, and Manufacturing Technologies Materials for Extreme Environments: Ultrahigh Temperature Ceramics (UHTCs) and Nano-laminated Ternary Carbides and Nitrides (MAX Phases) Polymer Derived Ceramics and Composites Advanced Thermal and Environmental Barrier Coatings: Processing, Properties, and Applications Thermomechanical Behavior and Performance of Composites Ceramic Integration and Additive Manufacturing Technologies Component Testing and Evaluation of Composites CMC Applications in Transportation and Industrial Systems Powder Processing Innovation and Technologies for Advanced Materials and Sustainable Development Novel, Green, and Strategic Processing and Manufacturing Technologies Ceramics for Sustainable Infrastructure: Geopolymers and Sustainable Composites Advanced Materials, Technologies, and Devices for Electro-optical and Medical Applications Porous Ceramics for Advanced Applications Through Innovative Processing Multifunctional Coatings for Sustainable Energy and Environmental Applications
Download or read book Designing with Structural Ceramics written by R.W. Davidge and published by Springer. This book was released on 1991-12-31 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last 30 years have seen a steady development in the range of ceramic materials with potential for high temperature engineering applications: in the 60s, self-bonded silicon carbide and reaction-bonded silicon nitride; in the 70s, improved aluminas, sintered silicon carbide and silicon nitrides (including sialons); in the 80s, various toughened Zr0 materials, ceramic matrix composites reinforced with silicon 2 carbide continuous fibres or whiskers. Design methodologies were evolved in the 70s, incorporating the principles of fracture mechanics and the statistical variation and time dependence of strength. These have been used successfully to predict the engineering behaviour of ceramics in the lower range of temperature. In spite of the above, and the underlying thermodynamic arguments for operations at higher temperatures, there has been a disappointing uptake of these materials in industry for high temperature usc. Most of the successful applications are for low to moderate temperatures such as seals and bearings, and metal cutting and shaping. The reasons have been very well documented and include: • Poor predictability and reliability at high temperature. • High costs relative to competing materials. • Variable reproducibility of manufacturing processes. • Lack of sufficiently sensitive non-destructive techniques. With this as background, a Europhysics Industrial Workshop sponsored by the European Physical Society (EPS) was organised by the Netherlands Energy Research Foundation (ECN) and the Institute for Advanced Materials of the Joint Research Centre (JRC) of the EC, at Petten, North Holland, in April 1990 to consider the status of thermomechanical applications of engineering ceramics.
Download or read book Machining of Ceramics and Composites written by Jahanmir and published by CRC Press. This book was released on 1999-01-04 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting modern advances in the machining of ceramics and composites, this work offers broadly based, fundamental information for selecting the appropriate machining processes and parameters, developing successful manufacturing strategies, and designing novel machining systems. It focuses on scientific and engineering developments affecting the present and future of machining processes.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2003 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Functionally Graded Materials FGMs written by Pulak M. Pandey and published by CRC Press. This book was released on 2021-09-15 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The science and study of functionally graded materials (FGMs) have intrigued researchers over the last few decades. Their application has the capability to produce parts with unmatched properties which are virtually impossible to obtain via conventional material routes. This book addresses various FGM aspects and provides a relevant, high-quality, and comprehensive data source. The book covers trends, process classification on various bases, physical processes involved, structure, properties, applications, advantages, and limitations. Emerging trends in the field are discussed in detail and advancements are thoroughly reviewed and presented to broaden the spectrum of FGM applications. This reference book will be of interest to scholars, researchers, academicians, industry practitioners, government labs, libraries, and anyone interested in the area of materials engineering.
Download or read book Fabrication of Ceramic Composites by Infiltration written by Materials Information Editors and published by . This book was released on 2004-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Functionally Graded Materials written by Y. Miyamoto and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seven years have elapsed since Dr. Renee Ford, editor-in-chief of Materials Technology, first suggested to me to publish a book on Functionally Graded Materials (FGMs). She said that the FGM concept, then largely unknown outside of Japan and a relatively few laboratories elsewhere, would be of great interest to everyone working in the materials field because of its potentially universal applicability. There was no book about FGMs in English at that time, although the number of research papers, review articles, and FGM conference proceedings had been increasing yearly. We discussed what the book should cover, and decided it should present a comprehensive description from basic theory to the most recent applications of FGMs. This would make it useful both as an introduction to FGMs for those simply curious about what this new materials field was all about, and also as a textbook for researchers, engineers, and graduate students in various material fields. The FGM Forum in Japan generously offered to support this publication program. is very difficult for an individual author to write a book that Because it covers such a wide range of various aspects of many different materials, I invited more than 30 eminent materials scientists throughout the world, who were associated with FGM research, to contribute selected topics. I also asked several leading researchers in this field to edit selected chapters: Dr. Barry H. Rabin, then at the U. S.
Download or read book High temperature Ceramic matrix Composites II written by Anthony Glyn Evans and published by . This book was released on 1995 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Ceramic Matrix Composites VIII written by J. P. Singh and published by Wiley-American Ceramic Society. This book was released on 2002-11-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic composites are leading candidate materials for high-temperature structural applications. This new book updates readers on the latest in state-of-the-art ceramic composite processing and fabrication methods, process modeling, processing-microstructure-property relationships, mechanical behavior, and characterization. Many of the most important aspects necessary for the understanding and further development of ceramic composites is covered in this volume. It will be of great interest to the technical community involved in advanced ceramic composite processing, characterization, component development, and manufacturing. Proceedings of the symposium held at the 104th Annual Meeting of The American Ceramic Society, April 28-May1, 2002 in Missouri; Ceramic Transactions, Volume 139.
Download or read book Fiber Reinforced Ceramic Composites written by K.S. Mazdiyasni and published by William Andrew. This book was released on 1990-12-31 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the first comprehensive treatment of continuous and discontinuous ceramic fiber and whisker reinforced ceramic composites, written by 29 authorities in the field.
Download or read book Ceramic Materials for Energy Applications Volume 32 Issue 9 written by Yutai Katoh and published by John Wiley & Sons. This book was released on 2011-10-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers from The American Ceramic Society's 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the Ceramics for Electric Energy Generation, Storage and Distribution; Advanced Ceramics and Composites for Nuclear and Fusion Applications; and Advanced Materials and Technologies for Rechargeable Batteries symposia.
Download or read book American Doctoral Dissertations written by and published by . This book was released on 2002 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Ceramic Processing and Technology written by J. Binner and published by Noyes Data Corporation/Noyes Publications. This book was released on 1990-01-01 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced ceramics and ceramic matrix composites continue to find increasing use in modern technological applications as ever more stringent demands are placed upon materials' properties. While advanced ceramics and ceramic composites have many potentially useful properties, they can be extremely difficult to fabricate. This book contains a series of independent chapters focusing on different aspects of ceramics processing. The views of leading experts on a number of ceramics processing options and the direction of which their field is taking. Aimed at the materials engineer, this book is a wonderful reference as well as a guide to expanding the knowledge of processing techniques and their underlying philosophies.
Download or read book Biomimetic Fabrication of Functional Ceramic Composites written by and published by . This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin films and multilayers of functional ceramics have a number of important applications including dielectrics, magnetic recording media, piezoelectric transducers, and integrated optical devices. Variously functionalized self-assembled monolayers, attached to single-crystal silicon substrates, were used to direct the deposition of thin films of the oxides of titanium, zinc, iron, and zirconium, at low temperatures and ambient pressures. The films were uniform, adherent, and pore-free and were, in many cases, comprised of micro-crystalline oxide particles. The monolayer functionality found to be most generally useful for these purposes included hydroxyl, carboxylate, and sulfonate functionality. In some cases the films contained desirable forms of the oxides that were different than those normally obtained: i.e., the anatase form of titania as opposed to rutile; and the tetragonal form of zirconia as opposed to monoclinic version. The patterning of the oxide films by patterning the underlying monolayer was also demonstrated. This project developed new technologies for the production of functional ceramics by creating templates for their deposition from solution and as such is a first step towards the generalized control of microstructural and crystallographic order by interface design in composite organic/inorganic materials.
