Download or read book Metal Matrix Composites written by Antonio Contreras Cuevas and published by Springer. This book was released on 2018-10-27 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers several aspects of the synthesis of composites by the pressureless infiltration technique. It describes the methods used to obtain green preforms, such as cold pressed and hot sintering, describing the heating time, load, and time required for pressing the preforms. Additionally, wettability phenomena, which is directly related on infiltration, is extensively described. Wettability process and interfacial reactions are analyzed in many ceramic-metal systems prior to fabricate the composites. A complete description of fabrication processes for Metal Matrix Composites is included. An extensive section on structural, chemical, and mechanical characterization of composites fabricated with aluminum and magnesium alloys as matrices reinforced with titanium carbide (TiC), aluminum nitride (AlN), silicon carbide (SiC) and alumina (Al2O3) is included. Relevant techniques for joining composites, such as welding and brazing are addressed. As well as issues pertaining to the corrosion and wear of composites are discussed as well. Corrosion behavior of some composites exposed to aqueous media was analyzed. Corrosion of composites using TiC and SiC like reinforcement and Al, Ni, and some Al-Cux, Al-Mgx and Al-Cu-Li alloys like matrix is discussed extensively. The structural characterization techniques addressed include: scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), optical microscopy (OM), differential thermal analysis (DTA), high resolution transmission electron microscopy (HRTEM), and thermogravimetry analysis (TGA). Mechanical testing including hardness, elastic modulus, tension tests, and impact tests were used in the characterization of composites. Theoretical models for prediction of some mechanical properties are included too.

Download or read book Metal Matrix Composites in Industry written by Alexander Evans and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal matrix composites are making tangible inroads into the "real" world of engineering. They are used in engineering components such as brake rotors, aircraft parts, combustion engines, and heat sinks for electronic systems. Yet, outside a relatively limited circle of specialists, these materials are mostly unknown. Designers do not as a rule think of using these materials, in part because access to information is difficult as these materials have not really entered engineering handbooks. Metal Matrix Composites in Industry is thus useful to engineers who wish to gain introductory knowledge of these materials and who want to know where "to find" them. Additionally, it provides researchers and academics with a survey of current industrial activity in this area of technology.

Download or read book Composites and Their Properties written by Ning Hu and published by BoD – Books on Demand. This book was released on 2012-08-22 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites are a class of material, which receives much attention not only because it is on the cutting edge of active material research fields due to appearance of many new types of composites, e.g., nanocomposites and bio-medical composites, but also because there are a great deal of promises for their potential applications in various industries ranging from aerospace to construction due to their various outstanding properties. This book mainly deals with fabrication and property characterization of various composites by focusing on the following topics: functional and structural nanocomposites, numerical and theoretical modelling of various damages in long fiber reinforced composites and textile composites, design, processing and manufacturing technologies and their effects on mechanical properties of composites, characterization of mechanical and physical properties of various composites, and metal and ceramic matrix composites. This book has been divided into five sections to cover the above contents.

Download or read book Scientific Information Bulletin written by and published by . This book was released on 1993 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Matrix Composites written by Karl U. Kainer and published by John Wiley & Sons. This book was released on 2006-08-21 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the properties of MMCs can be directly designed "into" the material, they can fulfill all the demands set by design engineers. This book surveys the latest results and development possibilities for MMCs as engineering and functional materials, making it of utmost value to all materials scientists and engineers seeking in-depth background information on the potentials these materials have to offer in research, development and design engineering.

Download or read book Electromagnetic Processing of Materials written by Shigeo Asai and published by Springer Science & Business Media. This book was released on 2012-02-12 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is both a course book and a monograph. In fact, it has developed from notes given to graduate course students on materials processing in the years 1989 to 2006. Electromagnetic Processing of Materials (EPM), originates from a branch of materials science and engineering developed in the 1980s as a field aiming to create new materials and/or design processes by making use of various functions which appear when applying the electric and magnetic fields to materials. It is based on transport phenomena, materials processing and magnetohydrodynamics. The first chapter briefly introduces the history, background and technology of EPM. In the second chapter, the concept of transport phenomena is concisely introduced and in the third chapter the essential part of magnetohydrodynamics is transcribed and readers are shown that the concept of transport phenomena does not only apply to heat, mass and momentum, but also magnetic field. The fourth chapter describes electromagnetic processing of electrically conductive materials such as electromagnetic levitation, mixing, brake, and etc., which are caused by the Lorentz force. The fifth chapter treats magnetic processing of organic and non-organic materials such as magnetic levitation, crystal orientation, structural alignment and etc., which are induced by the magnetization force. This part is a new academic field named Magneto-Science, which focuses on the development of super-conducting magnets. This book is written so as to be understood by any graduate student in engineering courses but also to be of interest to engineers and researchers in industries.

Download or read book Metal Matrix Composites A Modern Approach to Manufacturing written by Virat Khanna, Prianka Sharma, Santosh Kumar and published by Bentham Science Publishers. This book was released on 2024-03-28 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of metal matrix composite manufacturing, including fabrication methods, characterization techniques, and manufacturing applications. 10 chapters cover fundamental and applied topics on matrix metal composites. The book is a resource for all readers seeking to gain an in-depth understanding of metal matrix composites with its relevance to the modern industry. Key Features - Includes fully referenced contributions by experts in materials science - Provides an introduction to the subject, and a future prospective for a broad range of readers - Reviews current knowledge on fabrication techniques and structure property relationships of metal matrix composites - Includes dedicated chapters for reinforced composites (carbon fiber, carbon nanotubes, aluminium) - Includes guidance on material wear and tear and - Provides an investigation for process optimization for EDM for newly developed composites It is designed to be an essential resource for students and professionals in the field of materials science and engineering, as well as researchers and engineers working on metal matrix composite in manufacturing industries.

Download or read book Characterization of Minerals Metals and Materials written by Jiann-Yang Hwang and published by John Wiley & Sons. This book was released on 2012-05-09 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: This state-of-the-art reference contains chapters on all aspectsof the characterization of minerals, metals, and materials. The title presents papers from one of the largest yearly gatheringsof materials scientists in the world and thoroughly discusses thecharacterization of minerals, metals, and materials The scope includes current industrial applications and researchand developments in the following areas: • Characterization of Ferrous Metals • Characterization of Non-Ferrous Materials • Characterization of Minerals and Ceramics • Characterization Technologies • Characterization of Environmental and ConstructionMaterials • Characterization of Energy, Electronic and OpticalMaterials • Characterization of Carbon and Soft Materials • Characterization of Light Metals An excellent reference for global extractive and processmetallurgy industries, materials scientists and engineers,metallurgists, and mechanical engineers.

Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies

Download or read book Introduction to Metal Matrix Composites written by Yoshinori Nishida and published by Springer Science & Business Media. This book was released on 2013-01-13 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first of its kind to deal with fabrication processes of metal matrix composites (MMCs) theoretically, experimentally, systematically, and instructively. The theoretical bases of fabrication processes and recycling processes of MMCs are established in this volume. Most other books in the field are concerned with the mechanics of properties, which is not easy for readers to grasp, and they introduce fabrication processes only as techniques without theoretical discussion. Because this book provides a clear image of the fabrication processes of MMCs without using complicated mathematics, readers can use production theory to create new composites. Also, fundamental concepts of recycling of MMCs are given in this book for the first time so as to meet the demands for solving environmental problems. This work originally was published in Japanese and has attained a high reputation among Japanese professors and researchers in the field.

Download or read book Carbon Carbon Materials and Composites written by John D. Buckley and published by William Andrew. This book was released on 2012-12-02 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major areas of carbon-carbon materials and composites are described in this comprehensive volume. It presents data and technology on the materials and structures developed for the production of carbon-carbon materials and composites. The text is composed of papers by 13 noted authors in their areas of expertise relating to the processes and production of these material systems and structures. The subject matter in the book is arranged to lead the reader through materials processing, fabrication, structural analysis, and applications of typical carbon-carbon products. The information provided includes: fiber technology, matrix material, design of composite structures, manufacturing techniques, engineering mechanics, protective coatings, and structural applications using carbon-carbon materials and composites.

Download or read book TMS 2011 140th Annual Meeting and Exhibition Materials Fabrication Properties Characterization and Modeling written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2011-04-12 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the most up-to-date information on the state of Materials Fabrication, Properties, Characterization, and Modeling. It's a great mix of practical applied technology and hard science, which is of invaluable benefit to the global industry.

Download or read book High Performance Structural Material written by Yafang Han and published by Trans Tech Publications Ltd. This book was released on 2015-04-01 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the Chinese Materials Congress 2014 (CMC 2014), July 4-7, 2014, Chengdu, China

Download or read book Processing and Fabrication of Advanced Materials XIII written by and published by World Scientific. This book was released on 2005 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Challenges and Opportunities in Industrial and Mechanical Engineering A Progressive Research Outlook written by S M Pandey and published by CRC Press. This book was released on 2024-06-24 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt: Present time Industry 4.0 is the need of all industries because it connects industries to AI, high productivity, safety, and flexibility, ensures the 100% utilization of resources across diverse manufacturing systems, and could accelerate normal manufacturing systems to advanced manufacturing systems by using robotics, additive manufacturing, and many more. In this book, the collection of selected papers is constituted from the International Conference on Progressive Research in Industrial & Mechanical Engineering (PRIME 2021), which was at the National Institute of Technology (NIT), Patna, India from August 5 to 7, 2021. This conference brings together all academic people, industry experts, and researchers from India as well as abroad for involving thoughts on the needs, challenges, new technology, opportunities threats in the current transformational field of aspire. This book deliberates on several elements and their relevance to hard-core areas of industrial and mechanical engineering including design engineering, production engineering, indus trial engineering, automobile engineering, thermal and fluid engineering, mechatronics control robotics, interdisciplinary, and many new emerging topics that keep potential in several areas of applications. This book focuses on providing versatile knowledge of cut ting-edge practices to all readers, helping to develop a clear vision toward Industry 4.0, robotics automation, and additive manufacturing in this demanding and evolving time. The book will be a treasured reference for students, researchers, and professionals inter ested in mechanical engineering and allied fields.

Download or read book Fiber Reinforced Composites written by P.K. Mallick and published by CRC Press. This book was released on 1993-05-24 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintaining the interdisciplinary perspective of the first edition, this reference and text provides comprehensive discussions of all aspects of fiber-reinforced composites, including materials, mechanics, properties, test methods, manufacturing and design. Written from a conceptual point of view and emphasizing fundamentals, the second edition of Fiber Reinforced Composites offers updated and expanded sections including: fibers and matrix, including thermoplastic matrices; discontinuous fibers and laminated structures; static mechanical properties, fatigue properties and damage tolerance; resin flow, bag molding, filament winding and resin transfer molding; and environmental effects.

Download or read book Design Manufacturing and Applications of Composites written by A. D. Ngo and published by DEStech Publications, Inc. This book was released on 2010 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: