Download or read book High Temperature Superconductors Materials Properties and Applications written by Rainer Wesche and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The discovery by J. G. Bednorz and K. A. Mtllier in 1986 that the superconducting state can exist in oxides at temperatures above 30 K stimulated research in the field of superconductivity and opened up a new field of research. Within a few years a large number of cuprate superconductors with transition temperatures well above the boiling point of liquid nitrogen have been found. The possibility of using liquid nitrogen as coolant re-stimulated interest in power applications of supercon ductivity. In this book an overview of the known high-Te superconductors and their physical properties is presented. Aspects related to conductor fabrication and high-current applications are emphasised. The material should be suitable for use in graduate level courses on superconductivity. Researchers in the field may profit from the large number of tables and references describing its status at the end of 1997. An introduction to high-To superconductivity must be based on the fundamental physical principles of normal-state electrical conductivity and the well-known characteristics of conventional superconductors. In Chapter 2 this background is provided. Crystal structures, anisotropic properties and general trends of the critical temperatures of the cuprate superconductors are described in Chapters 3 and 4. The processing of superconductor powders addressed in Chapter 5 affects considerably the current-carrying capacity of high-T. wires. In Chapter 6 several fabrication techniques for superconducting wires are described. In addition, the factors limiting the transport critical currents ofhigh-Te wires are discussed.
Download or read book Bismuth Based High Temperature Superconductors written by Hiroshi Maeda and published by CRC Press. This book was released on 1996-07-09 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides coverage of the ongoing investigations on bismuth-based high-temperature cuprate superconductors, integrating scattered research activities and literature from 70 leading scientists throughout the world. The text covers crystal structures and microstructures, reversible or equilibrium magnetic and thermal properties, atomic site tunnel spectroscopy, experimental studies concerning equilibrium phases, and more.
Download or read book High Temperature Superconductivity 2 written by Anant V. Narlikar and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: In contrast to research on the fundamental mechanisms of High-Temperature Superconductivity, in recent years we have seen enormous developments in the fabrication and application of High-Tc-superconductors. The two volumes of High Temperature Superconductivity provide a survey of the state of the technology and engineering applications of these materials. They comprise extended original research papers and technical review articles written by physicists, chemists, materials scientists and engineers, all of them noted experts in their fields. The interdisciplinary and strictly application-oriented coverage should benefit graduate students and academic researchers in the mentioned areas as well as industrial experts. Volume 1 "Materials" focuses on major technical advancements in High-Tc materials processing for applications. Volume 2 "Engineering Applications" covers numerous application areas where High-Tc superconductors are making tremendous impact.
Download or read book High Temperature Superconducting Materials Science and Engineering written by Donglu Shi and published by Elsevier. This book was released on 1995-02-20 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the fascinating field of high-temperature superconductivity. Basic concepts–including experimental techniques and theoretical issues–are discussed in a clear, systematic manner. In addition, the most recent research results in the measurements, materials synthesis and processing, and characterization of physical properties of high-temperature superconductors are presented. Researchers and students alike can use this book as a comprehensive introduction not only to superconductivity but also to materials-related research in electromagnetic ceramics. Special features of the book: - presents recent developments in vortex-state properties, defects characterization, and phase equilibrium - introduces basic concepts for experimental techniques at low temperatures and high magnetic fields - provides a valuable reference for materials-related research - discusses potential industrial applications of high-temperature superconductivity - includes novel processing technologies for thin film and bulk materials - suggests areas of research and specific problems whose solution can make high-Tc superconductors a practical reality
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of High Temperature Superconductors to Electric Power Equipment written by Swarn S. Kalsi and published by John Wiley & Sons. This book was released on 2011-04-18 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only one-stop reference to design, analysis, and manufacturing concepts for power devices utilizing HTS. High temperature superconductors (HTS) have been used for building many devices for electric grids worldwide and for large ship propulsion motors for the U.S. Navy. And yet, there has been no single source discussing theory and design issues relating to power applications of HTS—until now. This book provides design and analysis for various devices and includes examples of devices built over the last decade. Starting with a complete overview of HTS, the subsequent chapters are dedicated to specific devices: cooling and thermal insulation systems; rotating AC and DC machines; transformers; fault current limiters; power cables; and Maglev transport. As applicable, each chapter provides a history of the device, principles, configuration, design and design challenges, prototypes, and manufacturing issues, with each ending with a summary of the material covered. The design analysis and design examples provide critical insight for readers to successfully design their own devices. Original equipment manufacturer (OEM) designers, industry and utilities users, universities and defense services research groups, and senior/postgraduate engineering students and instructors will rely on this resource. "HTS technology reduces electric losses and increases the efficiency of power equipment. This book by Swarn Kalsi, a leading expert on the HTS subject, provides a survey of the HTS technology and the design rules, performance analyses, and manufacturing concepts for power application-related devices. It compares conventional and HTS technology approaches for device design and provides significant examples of devices utilizing the HTS technology today. The book is useful for a broad spectrum of professionals worldwide: students, teaching staff, and OEM designers as well as users in industry and electric utilities." —Professor Dr. Rolf Hellinger, Research and Technologies Corporate Technology, Siemens AG
Download or read book Synthesis and Characterization of High temperature Superconductors written by John J. Pouch and published by . This book was released on 1993 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers describes the synthesis, properties, characteristics and applications of the recently discovered high-temperature superconductors. Results of research activities around the world are presented.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of High Temperature Superconductor written by Neeraj Khare and published by CRC Press. This book was released on 2003-05-06 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Devoted to the preparation, characterization and evaluation of HTS electronic devices, the Handbook of High-Temperature Superconductor Electronics provides information on using high-Tc thin films and junctions to increase speed, lessen noise, lower power consumption and enhance upper frequency limits in superconductor electronics. Compiled by a gro
Download or read book Physical Properties of High Temperature Superconductors written by Rainer Wesche and published by John Wiley & Sons. This book was released on 2015-05-13 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: A much-needed update on complex high-temperature superconductors, focusing on materials aspects; this timely book coincides with a recent major break-through of the discovery of iron-based superconductors. It provides an overview of materials aspects of high-temperature superconductors, combining introductory aspects, description of new physics, material aspects, and a description of the material properties This title is suitable for researchers in materials science, physics and engineering. Also for technicians interested in the applications of superconductors, e.g. as biomagnets
Download or read book High Tc Superconductivity written by R. Bruce Van Dover and published by . This book was released on 1988 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superconductors in the Power Grid written by C. Rey and published by Elsevier. This book was released on 2015-04-20 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superconductors offer high throughput with low electric losses and have the potential to transform the electric power grid. Transmission networks incorporating cables of this type could, for example, deliver more power and enable substantial energy savings. Superconductors in the Power Grid: Materials and Applications provides an overview of superconductors and their applications in power grids. Sections address the design and engineering of cable systems and fault current limiters and other emerging applications for superconductors in the power grid, as well as case studies of industrial applications of superconductors in the power grid. - Expert editor from highly respected US government-funded research centre - Unique focus on superconductors in the power grid - Comprehensive coverage
Download or read book Technology 2000 written by and published by . This book was released on 1991 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low Temperature Electronics written by Edmundo A. Gutierrez-D. and published by Academic Press. This book was released on 2001 with total page 985 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes the advances in cryoelectronics starting from the fundamentals in physics and semiconductor devices to electronic systems, hybrid superconductor-semiconductor technologies, photonic devices, cryocoolers and thermal management. This book provides an exploration of the theory, research, and technologies related to cryoelectronics.
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1963 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Superconductivity written by David A. Cardwell and published by CRC Press. This book was released on 2022-07-05 with total page 1292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second of three volumes of the extensively revised and updated second edition of the Handbook of Superconductivity. The past twenty years have seen rapid progress in superconducting materials, which exhibit one of the most remarkable physical states of matter ever to be discovered. Superconductivity brings quantum mechanics to the scale of the everyday world where a single, coherent quantum state may extend over a distance of metres, or even kilometres, depending on the size of a coil or length of superconducting wire. Viable applications of superconductors rely fundamentally on an understanding of this intriguing phenomena and the availability of a range of materials with bespoke properties to meet practical needs. While the first volume covers the fundamentals of superconductivity and the various classes of superconducting materials, Volume 2 covers processing of the desired superconducting materials into desired forms: bulks, films, wires and junction-based devices. The volume closes with articles on the refrigeration methods needed to put the materials into the superconducting state. Key Features: Covers the depth and breadth of the field Includes contributions from leading academics and industry professionals across the world Provides hands-on guidance to the manufacturing and processing technologies A comprehensive reference, the handbook is suitable for both graduate students and practitioners in experimental physics, materials science, and multiple engineering disciplines, including electronic and electrical, chemical, mechanical, metallurgy and others.
Download or read book Development of high temperature superconductor cables for high direct current applications written by Preuß, Alan and published by KIT Scientific Publishing. This book was released on 2021-01-14 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: A design process for HTS DC cables was developed for high current applications. Based on the design process, a 35 kA HTS DC cable demonstrator was developed. The superconducting elements of the demonstrator were manufactured and tested individually at 77 K. Afterwards, the demonstrator cable was assembled and tested at 77 K. The assembled demonstrator successfully reached 35 kA at 77 K and self field conditions.
