Download or read book Extruding Plastics written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: Worldwide, extrusion lines successfully process more plastics into prod ucts than other processes by consuming at least 36 wt% of all plastics. They continue to find practical solutions for new products and/ or prob lems to meet new product performances. This book, with its practical industry reviews, is a unique handbook (the first of its kind) that covers over a thousand of the potential combina tions of basic variables or problems with solutions that can occur from up-stream to down-stream equipment. Guidelines are provided for maxi mizing processing efficiency and operating at the lowest possible cost. It has been prepared with an awareness that its usefulness will depend greatly upon its simplicity and provision of essential information. It should be useful to: 0) those already extruding and desiring to obtain additional information for their line and/ or prOVide a means of reviewing other lines that can provide their line with operating improvements; (2) those processing or extruding plastics for the first time; (3) those consider ing going into another extrusion process; (4) those desiring additional information about employing the design of various products more effi ciently, with respect to both performance and cost; (5) those contemplat ing entering the business of extrusion; (6) those in new venture groups, materials development, and/ or market development; (7) those in disci plines such as nonplastics manufacturers, engineers, designers, quality control, financial, and management; and (8) those requiring a textbook on extrusion in trade schools and high schools or colleges.
Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. - A practical guide to the selection, design and optimization of extrusion processes and equipment - Designed to improve production efficiency and product quality - Focuses on practical fault analysis and troubleshooting techniques
Download or read book Plastics Extrusion Technology Handbook written by Sidney Levy and published by Industrial Press Inc.. This book was released on 1989 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering complete and in-depth data and information on plastics extrusion, this practical handbook presents the technology of the subject rather than the theory. Presents an overview of extrusion technology as applied to the operation of extrusion systems and the design of tooling and equipment for use in the process. Provides basic technical information on the behavior of polymer and plastics materials in the extrusion process. Contains tool descriptions that provide a basis for the analysis of existing product lines as examples for the design of new systems. Includes illustrations of and background material on control systems for the extruder and extrusion process. Fundamentals of the Extrusion Process. Extruder Design, Construction and Operation. Extrusion Dies for Specific Product Lines. Controlling the Extrusion Process. Heat Transfer and Heat Content Considerations. Downstream Equipment and Auxiliary Units for Extrusion Lines. Coextrusion and Dual-Extrusion Technology. Extrusion of Cellular Plastics Products. Extrusion System Design and Integration. On-Line and Computer Control of the Extrusion Process. Plant Design and Operations. Extrusion Products and Processes. Glossary. Index.
Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2004-12-31 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why is it important to get to equilibrium and how long does it take? Are there problems running polypropylene profiles on a single screw extruder? Does the job involve compounding color concentrates on a corotating twin screw extruder? This unique reference work is designed to aid operators, engineers, and managers in quickly answering such practical day-to-day questions in extrusion processing. This comprehensive volume is divided into 7 Parts. It contains detailed reference data on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. This reference is a practical guide to extrusion bringing together both the equipment and materials processing aspects. It provides basic and advanced topics about the thermoplastics processing in the extruder, for reference and training. Parts 1 û 3, emphasize the fundamentals, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. Parts 4 û 7 treat advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. Extensive applications in Part 7 cover such contemporary areas as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. Each chapter includes review topics.
Download or read book Plastics Extrusion Technology written by U. Berghaus and published by Hanser Gardner Publications. This book was released on 1997 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now updated, this industry standard provides information on the aspects and processes of extrusion technology, including design, construction, and operation of extrusion lines. Well-known experts in various fields of extrusion have contributed to this book. As a reference book it will undoubtedly prove a considerable benfit to engineers involved with the extrusion process. “The presentation of this book is excellent and the quantity of information is immense.” Applied Mechanics Review “... this book belongs on the bookshelf of every engineer, operations supervisor and maintenance manager. It is also invaluable for plastic engineering students at all levels.” Polymer News “ ... on a value for money basis it is outstanding.” Plastics & Rubber Weekly
Download or read book Polymer Extrusion written by Chris Rauwendaal and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2014-01-16 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: Initially published "to bridge the gap between theory and practice in extrusion," this 5th edition of Polymer Extrusion continues to serve the practicing polymer engineer and chemist, providing the theoretical and the practical tools for successful extrusion operations. In its revised and expanded form, it also incorporates the many new developments in extrusion theory and machinery over the last years. Contents · Different Types of Extruders · Extruder Hardware · Instrumentation and Control · Fundamental Principles · Important Polymer Properties · Functional Process Analysis · Extruder Screw Design · Die Design · Twin Screw Extruders · Troubleshooting Extruders · Modeling and Simulation of the Extrusion Process
Download or read book Extrusion Dies for Plastics and Rubber written by Christian Hopmann and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2017-04-10 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This definitive book provides a comprehensive account of the full range of dies used for extrusion of plastics and elastomers. The distinctive features of the various types of dies are described in detail. Expert advice on the configuration of dies is given, and the possibilities of computer-aided design, as well as its limitations, are demonstrated. Fundamentals and computational procedures are clearly explained so that no special prior knowledge of the subject is required. The mechanical configuration, handling, and maintenance of extrusion dies are described. Calibration procedures for pipes and profiles are also discussed. This book was written for plastics engineers who need daily support in their practical work in industry and science, as well as for students preparing for their professional life. The 4th edition is brought up to date with several important additions, including coverage of multilayer (>15 layer) dies, melt encapsulation, and simulation tools (rheological/thermal CFD simulations).
Download or read book Practical Extrusion Blow Molding written by Samuel L. Belcher and published by CRC Press. This book was released on 1999-06-18 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Outline proven methods from planning and manufacture to product testing, this work reports on the most effective means of producing plastics by the extrusion blow moulding process. It supplies data on materials, performance standards and testing methodologies developed in industry with proven reliability and cost effectiveness.
Download or read book Extrusion of Polymers written by Chan I. Chung and published by . This book was released on 2011 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author presents single-screw extrusion technology together with the relevant polymer fundamentals, with an emphasis on screw design. The presentation begins on a physical level providing an in-depth tutorial for conceptual understanding, followed by an analytical level with mathematical models. Practical applications of the mathematical models are illustrated by examples. A brief description of twin-screw extrusion technology is also presented. The second edition includes new chapters on die design, elastic effects in melt flow, and a new type of single-screw extruder with channeled barrel as well as improvements and corrections in the first edition. Content: " Physical Description of Single-Screw Extrusion " Fundamentals of Polymers and Melt Rheology " Theory of Single-Screw Extrusion and Scale-Up " Screw Design and High Performance Screws " Gear Pumps, Static Mixers, and Dynamic Mixers " Physical Description of Twin-Screw Extruders " Die Design " Elastic Effects in Melt Flow " Special Single-Screw Extruder with Channeled Barrel
Download or read book Polyethylene Film Extrusion written by B. H Gregory and published by Trafford Publishing. This book was released on 2009-11 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised version of this book is now available.The polyethylene industry has been in the midst of major restructuring and rationalization. This has lead to joint ventures and alliances to combine technologies and exploit opportunities to maximize improvements in process productivity, catalyst innovations, and enhancements in extrusion technology and converting. This comprehensive study of the polyethylene film extrusion process describes this technology in detail. In depth descriptions of the manufacturing processes for polyethylene homopolymers and copolymers, including metallocenes, are reviewed. All aspects of machine design with particular emphasis on screws and dies including coextrusion are discussed comprehensively. With computer modeling, the interactions between equipment and polymer are quantified. All aspects of equipment design and polymer features that control melt fracture, interfacial instabilities, gauge control, output and temperature, and cooling of blown and cast film processes are presented quantitatively. This methodology will highlight solutions in troubleshooting for optimum design and operation and the best available polymer and formulation choices. All polyethylene film applications in packaging, agriculture, lamination, and construction, consumer, industrial, and health care are reviewed and discussed in depth.
Download or read book Extrusion of Polymers written by Chan I. Chung and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2019-10-07 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author presents single-screw extrusion technology together with the relevant polymer fundamentals, with an emphasis on screw design. The presentation begins on a physical level, providing an in-depth conceptual understanding, followed by an analytical level with mathematical models. Practical applications of the mathematical models are illustrated by numerous examples. A brief description of twin-screw extrusion technology is also presented. New in the third edition: a novel patented barrier screw design that eliminates shortcomings of all previous barrier screw designs, more descriptive specific screw design guidelines, a scientifically designed pineapple mixing section, and general improvements and corrections. Contents: • Physical Description of Single-Screw Extrusion • Fundamentals of Polymers and Melt Rheology • Theories of Single-Screw Extrusion and Scale-Up • Screw Design and High Performance Screws • Gear Pumps, Static Mixers, and Dynamic Mixers • Die Design • Viscoelastic Effects in Melt Flow • Special Single-Screw Extruder with Channeled Barrel • Physical Description of Twin-Screw Extruders
Download or read book Screw Extrusion written by James Lindsay White and published by . This book was released on 2003 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Screw extruders are the most important of all polymer processing machines There is a need for a comprehensive book on this subject. This book emphazises the understanding of the underlaying principles of screw extrusion, the design and behavior of screw based machines. It helps the enineer t optimize his equipment and enhance production rates. Contents: · Introduction · Fundamentals · Screw Extrusion Technology · Technology of Single Screw Extrusion with Reciprocating Screws · Single Screw Extruder Analysis and Design · Twin and Multiscrew Extrusion
Download or read book Principles of Polymer Processing written by Zehev Tadmor and published by John Wiley & Sons. This book was released on 2013-12-02 with total page 1004 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly revised edition of the classic text on polymer processing The Second Edition brings the classic text on polymer processing thoroughly up to date with the latest fundamental developments in polymer processing, while retaining the critically acclaimed approach of the First Edition. Readers are provided with the complete panorama of polymer processing, starting with fundamental concepts through the latest current industry practices and future directions. All the chapters have been revised and updated, and four new chapters have been added to introduce the latest developments. Readers familiar with the First Edition will discover a host of new material, including: * Blend and alloy microstructuring * Twin screw-based melting and chaotic mixing mechanisms * Reactive processing * Devolatilization--theory, mechanisms, and industrial practice * Compounding--theory and industrial practice * The increasingly important role of computational fluid mechanics * A systematic approach to machine configuration design The Second Edition expands on the unique approach that distinguishes it from comparative texts. Rather than focus on specific processing methods, the authors assert that polymers have a similar experience in any processing machine and that these experiences can be described by a set of elementary processing steps that prepare the polymer for any of the shaping methods. On the other hand, the authors do emphasize the unique features of particular polymer processing methods and machines, including the particular elementary step and shaping mechanisms and geometrical solutions. Replete with problem sets and a solutions manual for instructors, this textbook is recommended for undergraduate and graduate students in chemical engineering and polymer and materials engineering and science. It will also prove invaluable for industry professionals as a fundamental polymer processing analysis and synthesis reference.
Download or read book Reactive Extrusion written by Günter Beyer and published by John Wiley & Sons. This book was released on 2018-01-03 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first comprehensive overview of reactive extrusion technology for over a decade combines the views of contributors from both academia and industry who share their experiences and highlight possible applications and markets. They also provide updated information on the underlying chemical and physical concepts, summarizing recent developments in terms of the material and machinery used. As a result, readers will find here a compilation of potential applications for reactive extrusion to access new and cost-effective polymeric materials, while using existing compounding machines.
Download or read book Extrusion Dies written by Walter Michaeli and published by . This book was released on 1984 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastics Extrusion Technology written by Allan L Griff and published by Hassell Street Press. This book was released on 2021-09-09 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important and is part of the knowledge base of civilization as we know it. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. To ensure a quality reading experience, this work has been proofread and republished using a format that seamlessly blends the original graphical elements with text in an easy-to-read typeface. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Essential Manufacturing written by Gordon Mair and published by John Wiley & Sons. This book was released on 2019-04-08 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the manufacturing industry Essential Manufacturing provides a comprehensive introduction to the wide breadth of the manufacturing industry. There is a need for all engineering and business students to understand the importance and context of the manufacturing industry. An engineer should have a well rounded appreciation of all aspects of the industry they work in, including manufacturing. This is evidenced by professional bodies expecting all accredited engineering courses to provide students with a background that allows them to see their own specific discipline in context. Similarly, business students will often find themselves dealing in some way with manufactured products or even be directly involved in manufacturing operations management. This book will cover the full spectrum of the manufacturing industry to provide a holistic appreciation of the topic but with enough detail to be of practical use. The book begins with an introduction to the manufacturing industry, its history, and some important manufacturing concepts. The materials used in manufacturing and how they are produced are covered. This is followed by a more detailed description of the more common manufacturing processes, their application, and the types of automation used in the manufacturing industry. Consideration is then given to the important aspects of manufacturing operations management and production planning and control, work study, and manufacturing economics. How to maintain quality in the manufacturing process, including metrology, is examined and this is followed by human factors in manufacturing. Finally, a speculative look at the future of manufacturing is included. Key features: Takes a self-contained approach. Includes review questions. Suitable as an introduction for more advanced study. Satisfies the requirements of college and first and second year university engineering courses. The book provides a comprehensive, concise introduction to the manufacturing industry for engineering and management students.
