Download or read book Extrusion Coating written by B. H. Gregory and published by Trafford Publishing. This book was released on 2008-05-28 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive study of extrusion coating technology describes the process and applications in detail, combining experimental data with computer modeling and the author's 30 years of experience. This methodology provides insight, clarity and assistance in problem solving, process optimization and new product development. The oportunities to exploit a wide range of polymers by the extrusion coater are discussed in detail. These include LDPE, HDPE, PP, ionomers, copolymers and blends and speciality materials, such as EVOH and PET. Everything you wanted to know about: Screw and die design for mono and coextrusion. Chill roll design and winders. Maximizing adhesion at high line speeds:- time in air gap and melt relaxation. Adhesion promotion:- corona, flame, ozone treatment and chemical primers. Feedblock and dual manifold coextrusion compared. Coextrusion:- control layer arrangement and eliminate interfacial instabilities. Optimize melt stability and minimize neck-in in air gap. Material selection:- polyethylenes, copolymers, ionomers, metallocenes, polypropylene etc. Substrates: pulp and paper, aluminium foil, plastic films etc. Applications for extrusion coatings and laminates. Minimize odor and off-taste and the scalping phenomenon in food packaging. Trouble shooting and many more insights. Target Audience: Engineers, marketers, technicians and students involved with the extrusion coating process. Table of Contents: The Extrusion Coating Process Equipment and Screw Design Die Design Stretching Flows and Neck-In Adhesion Coextrusion Adhesion Promotion Methods Polymers for Extrusion Coating: includes, coplymers, ionomers, PP, blends, metallocene PEs Speciality Polymers: EVOH and PET Improving organoleptic properties Substrates and Films for the EXtrusion Coater Extrusion Coated Products and Applications
Download or read book Rapra written by and published by iSmithers Rapra Publishing. This book was released on 1983 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments in the European Extrusion Industry written by R. Hudson and published by iSmithers Rapra Publishing. This book was released on 1995 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report provides the reader with not only a review of technology developments but also a consideration of end-use market factors.
Download or read book Extruding Plastics written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 1998-10-31 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Worldwide, extrusion lines successfully process more plastics into prod ucts than other processes by consuming at least 36 wt% of all plastics. They continue to find practical solutions for new products and/ or prob lems to meet new product performances. This book, with its practical industry reviews, is a unique handbook (the first of its kind) that covers over a thousand of the potential combina tions of basic variables or problems with solutions that can occur from up-stream to down-stream equipment. Guidelines are provided for maxi mizing processing efficiency and operating at the lowest possible cost. It has been prepared with an awareness that its usefulness will depend greatly upon its simplicity and provision of essential information. It should be useful to: 0) those already extruding and desiring to obtain additional information for their line and/ or prOVide a means of reviewing other lines that can provide their line with operating improvements; (2) those processing or extruding plastics for the first time; (3) those consider ing going into another extrusion process; (4) those desiring additional information about employing the design of various products more effi ciently, with respect to both performance and cost; (5) those contemplat ing entering the business of extrusion; (6) those in new venture groups, materials development, and/ or market development; (7) those in disci plines such as nonplastics manufacturers, engineers, designers, quality control, financial, and management; and (8) those requiring a textbook on extrusion in trade schools and high schools or colleges.
Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2004-12-31 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why is it important to get to equilibrium and how long does it take? Are there problems running polypropylene profiles on a single screw extruder? Does the job involve compounding color concentrates on a corotating twin screw extruder? This unique reference work is designed to aid operators, engineers, and managers in quickly answering such practical day-to-day questions in extrusion processing. This comprehensive volume is divided into 7 Parts. It contains detailed reference data on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. This reference is a practical guide to extrusion bringing together both the equipment and materials processing aspects. It provides basic and advanced topics about the thermoplastics processing in the extruder, for reference and training. Parts 1 û 3, emphasize the fundamentals, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. Parts 4 û 7 treat advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. Extensive applications in Part 7 cover such contemporary areas as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. Each chapter includes review topics.
Download or read book ANTEC 2001 written by Society of Plastics Engineers. Technical Conference and published by Taylor & Francis. This book was released on 2001 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Food Extrusion Technology written by Medeni Maskan and published by CRC Press. This book was released on 2016-04-19 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fresh view of the state-of-the-art, Advances in Food Extrusion Technology focuses on extruder selection, extrudate development, quality parameters, and troubleshooting in the 21st century extrusion process. In particular, the book:Introduces the history, nomenclature, and working principles of extrusion technologyPresents an overview of various t
Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. A practical guide to the selection, design and optimization of extrusion processes and equipment Designed to improve production efficiency and product quality Focuses on practical fault analysis and troubleshooting techniques
Download or read book Coatings Technology Handbook written by Arthur A. Tracton and published by CRC Press. This book was released on 2005-07-28 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as an all-in-one guide to the entire field of coatings technology, this encyclopedic reference covers a diverse range of topics-including basic concepts, coating types, materials, processes, testing and applications-summarizing both the latest developments and standard coatings methods. Take advantage of the insights and experience of over
Download or read book Handbook of Industrial Polyethylene and Technology written by Mark A. Spalding and published by John Wiley & Sons. This book was released on 2017-10-12 with total page 1382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an exhaustive description of polyethylene. The 50+ chapters are written by some of the most experienced and prominent authors in the field, providing a truly unique view of polyethylene. The book starts with a historical discussion on how low density polyethylene was discovered and how it provided unique opportunities in the early days. New catalysts are presented and show how they created an expansion in available products including linear low density polyethylene, high density polyethylene, copolymers, and polyethylene produced from metallocene catalysts. With these different catalysts systems a wide range of structures are possible with an equally wide range of physical properties. Numerous types of additives are presented that include additives for the protection of the resin from the environment and processing, fillers, processing aids, anti-fogging agents, pigments, and flame retardants. Common processing methods including extrusion, blown film, cast film, injection molding, and thermoforming are presented along with some of the more specialized processing techniques such as rotational molding, fiber processing, pipe extrusion, reactive extrusion, wire and cable, and foaming processes. The business of polyethylene including markets, world capacity, and future prospects are detailed. This handbook provides the most current and complete technology assessments and business practices for polyethylene resins.
Download or read book Plastics Technology Handbook written by Manas Chanda and published by CRC Press. This book was released on 2017-11-07 with total page 1012 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated throughout to reflect advances over the last decade, the Fifth Edition continues the handbook’s tradition of authoritative coverage of fundamentals, production methods, properties, and applications of plastics and polymer-based materials. It covers tooling for plastics fabrication processes, thermoplastics, thermosetting plastics, foamed plastics, reinforced plastics, plastisols, and new developments in mold design. It also discusses rubber compounding and processing technologies. More recent developments in polymer fabrication and processing, including electrospinning, electrografted coating, polymer-metal hybrid joining, flex printing, and rapid prototyping/ 3D printing, are also presented. The handbook highlights advanced materials including natural and synthetic gfnanosize polymers, their unusual properties, and innovative applications, as well as polymer-carbon nanocomposites, graphene-based polymer nanocomposites, smart healable polymer composites, smart polymer coatings, electroactive polymers, polymer nanomaterials, and novel nano-/microfibrillar polymer composites. It offers updates on polymer solar battery development, plastics recycling and disposal methods, new concepts of "upcycling" and single-polymer composites, renewable synthetic polymers, biodegradable plastics and composites, and toxicity of plastics. The book also provides an overview of new developments in polymer applications in various fields including packaging, building and construction, corrosion prevention and control, automotive, aerospace applications, electrical and electronic applications, agriculture and horticulture, domestic appliances and business machines, medical and biomedical applications, marine and offshore applications, and sports.
Download or read book Thermoplastic Materials written by Christopher C. Ibeh and published by CRC Press. This book was released on 2011-04-25 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text offers a detailed presentation of thermoplastic materials that are commercially available for the plastics and polymer industries. It discusses chemical structure-property relationships and various categories of thermoplastic resins, including general purpose/commodity, quasicommodity, engineering, and specialty. Some of the thermoplastics covered include polycarbonate, nylon, ABS, and PMMA. Using a process-oriented format, the author explores application areas of thermoplastics to elucidate the interrelation and effect of processing on the properties and performance of these materials.
Download or read book Extrusion Coating Lamination and Coextrusion written by Bertram Hubert Gregory and published by . This book was released on 2012 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical study of the production and potential of multilayered plastic films This book is written for the industry professional engaged in the development, production or specification of multilayered films for packaging and other industrial applications. It will enable the reader to optimize product performance and evaluate the most cost effective solutions, with useful information on the key polymers and substrates used. Multilayer film structures provide properties and performance which could not be achieved by a single material, whilst also exploiting cheap and easily processed polymers. All three processes described can be used in their manufacture, and in combination they provide yet more options and benefits. One role of this book is to explain when each should be used. This is a practical process manual filled with useful advice for the processor seeking the optimum product, describing the effects of machine design, process variables and materials selection. There is sufficient theory for the student or industry newcomer who wishes to understand how the processes work. Designers and end-users will also find plenty of information on the properties and performance that can be obtained.
Download or read book Extrusion Coating of Paper and Paperboard written by Technical Association of the Pulp and Paper Industry. Extrusion Coating Committee and published by . This book was released on 1976 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polyolefin Compounds and Materials written by Mariam Al-Ali AlMa'adeed and published by Springer. This book was released on 2015-12-23 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes industrial applications of polyolefins from the researchers' perspective. Polyolefins constitute today arguably the most important class of polymers and polymeric materials for widespread industrial applications. This book summarizes the present state of the art. Starting from fundamental aspects, such as the polymerization techniques to synthesize polyolefins, the book introduces the topic. Basic knowledge about polyolefin composites and blends is explained, before applications aspects in different industry sectors are discussed. The spectrum comprises a wide range of applications and industry sectors, such as the packaging and food industry, the textile industry, automotive and buildings, and even biomedical applications. Topics, which are addressed in the various chapters, comprise synthesis and processing of the materials; their classification; mechanical, physical and technical requirements and properties; their characterization; and many more. In the end of the book, even the disposal, degradation and recycling of polyolefins are addressed, and light is shed on their commercial significance and economic value. In this way, the book follows the entire 'lifetime' of polyolefin compounds and materials: from their synthesis and processing, over applications, to the recycling and reuse of disposed or degraded polyolefin substrates.
Download or read book Plastics Fabrication and Recycling written by Manas Chanda and published by CRC Press. This book was released on 2016-04-19 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Derived from the fourth edition of the well-known Plastics Technology Handbook, Plastics Fabrication and Recycling presents the molding and fabrication processes of plastics as well as several important fe
Download or read book Aluminum Compounds Advances in Research and Application 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-06-21 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminum Compounds—Advances in Research and Application: 2013 Edition is a ScholarlyBrief™ that delivers timely, authoritative, comprehensive, and specialized information about ZZZAdditional Research in a concise format. The editors have built Aluminum Compounds—Advances in Research and Application: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about ZZZAdditional Research in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Aluminum Compounds—Advances in Research and Application: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.