Download or read book Extruder Principles and Operation written by M.J. Stevens and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to fill a gap between the theoretical studies and the practical experience of the processor in the extrusion of thermoplastic polymers. The former have provided a basis for numerical design of extruders and their components, but generally give scant attention to the practical performance, especially to the conflict between production rate and product quality. In practice extruders are frequently purchased to perform a range of duties; even so, the operator may have to use a machine designed for another purpose and not necessarily suitable for the polymer, process or product in hand. The operator's experience enables him to make good product in unpromising circumstances, but a large number of variables and interactions often give apparently contradictory results. The hope is that this book will provide a logical background, based on both theory and experience, which will help the industrial processor to obtain the best performance from his equipment, to recognize its limitations, and to face new problems with confidence. Mathematics is used only to the extent that it clarifies effects which cannot easily be expressed in words; ifit is passed over, at least a qualitative understanding should remain. The approximate theory will not satisfy the purist, but this seems to the authors less important than a clear representation of the physical mechanisms on which so much of the polymer processing industry depends. M. J. STEVENS J. A.
Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. - A practical guide to the selection, design and optimization of extrusion processes and equipment - Designed to improve production efficiency and product quality - Focuses on practical fault analysis and troubleshooting techniques
Download or read book Extrusion Cooking written by Girish M. Ganjyal and published by Elsevier. This book was released on 2020-07-25 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extrusion Cooking provides a detailed description of extrusion processing with an in-depth exploration of cereal grains processing. In particular, the book addresses the basic principles of extrusion processing, various extruder parts and their design principles, food ingredients and their characteristics as they relate to extrusion. It also discusses physicochemical changes in the different ingredient components as they are processed in an extruder, modeling and control of extrusion process, scale-up aspects, extrusion plant design, food safety in extrusion, new advancements in extrusion, and a look into the future of extrusion. This valuable text serves as a one-volume reference on extrusion processing for food industry professionals and students. - Covers the engineering, chemistry, nutrition, and food safety aspects of extrusion cooking - Presents both the fundamental and applied aspects of extrusion processing - Details the extrusion of whole-grain, high-fiber, and high-protein foods - Covers both expanded and texturized products - Outlines extrusion processing of different ingredients - Addresses new technologies that have expanded the extruder capabilities - Analyzes new developments in the area of modeling of extrusion processing
Download or read book Polymer Extrusion written by Chris Rauwendaal and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2014-01-16 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: Initially published "to bridge the gap between theory and practice in extrusion," this 5th edition of Polymer Extrusion continues to serve the practicing polymer engineer and chemist, providing the theoretical and the practical tools for successful extrusion operations. In its revised and expanded form, it also incorporates the many new developments in extrusion theory and machinery over the last years. Contents · Different Types of Extruders · Extruder Hardware · Instrumentation and Control · Fundamental Principles · Important Polymer Properties · Functional Process Analysis · Extruder Screw Design · Die Design · Twin Screw Extruders · Troubleshooting Extruders · Modeling and Simulation of the Extrusion Process
Download or read book Hot Melt Extrusion written by Dennis Douroumis and published by John Wiley & Sons. This book was released on 2012-04-24 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot-melt extrusion (HME) - melting a substance and forcing it through an orifice under controlled conditions to form a new material - is an emerging processing technology in the pharmaceutical industry for the preparation of various dosage forms and drug delivery systems, for example granules and sustained release tablets. Hot-Melt Extrusion: Pharmaceutical Applications covers the main instrumentation, operation principles and theoretical background of HME. It then focuses on HME drug delivery systems, dosage forms and clinical studies (including pharmacokinetics and bioavailability) of HME products. Finally, the book includes some recent and novel HME applications, scale -up considerations and regulatory issues. Topics covered include: principles and die design of single screw extrusion twin screw extrusion techniques and practices in the laboratory and on production scale HME developments for the pharmaceutical industry solubility parameters for prediction of drug/polymer miscibility in HME formulations the influence of plasticizers in HME applications of polymethacrylate polymers in HME HME of ethylcellulose, hypromellose, and polyethylene oxide bioadhesion properties of polymeric films produced by HME taste masking using HME clinical studies, bioavailability and pharmacokinetics of HME products injection moulding and HME processing for pharmaceutical materials laminar dispersive & distributive mixing with dissolution and applications to HME technological considerations related to scale-up of HME processes devices and implant systems by HME an FDA perspective on HME product and process understanding improved process understanding and control of an HME process with near-infrared spectroscopy Hot-Melt Extrusion: Pharmaceutical Applications is an essential multidisciplinary guide to the emerging pharmaceutical uses of this processing technology for researchers in academia and industry working in drug formulation and delivery, pharmaceutical engineering and processing, and polymers and materials science. This is the first book from our brand new series Advances in Pharmaceutical Technology. Find out more about the series here.
Download or read book Screw Extrusion written by James Lindsay White and published by . This book was released on 2003 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Screw extruders are the most important of all polymer processing machines There is a need for a comprehensive book on this subject. This book emphazises the understanding of the underlaying principles of screw extrusion, the design and behavior of screw based machines. It helps the enineer t optimize his equipment and enhance production rates. Contents: · Introduction · Fundamentals · Screw Extrusion Technology · Technology of Single Screw Extrusion with Reciprocating Screws · Single Screw Extruder Analysis and Design · Twin and Multiscrew Extrusion
Download or read book Advances in Food Extrusion Technology written by Medeni Maskan and published by CRC Press. This book was released on 2016-04-19 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fresh view of the state-of-the-art, Advances in Food Extrusion Technology focuses on extruder selection, extrudate development, quality parameters, and troubleshooting in the 21st century extrusion process. In particular, the book:Introduces the history, nomenclature, and working principles of extrusion technologyPresents an overview of various t
Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2004-12-31 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why is it important to get to equilibrium and how long does it take? Are there problems running polypropylene profiles on a single screw extruder? Does the job involve compounding color concentrates on a corotating twin screw extruder? This unique reference work is designed to aid operators, engineers, and managers in quickly answering such practical day-to-day questions in extrusion processing. This comprehensive volume is divided into 7 Parts. It contains detailed reference data on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. This reference is a practical guide to extrusion bringing together both the equipment and materials processing aspects. It provides basic and advanced topics about the thermoplastics processing in the extruder, for reference and training. Parts 1 û 3, emphasize the fundamentals, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. Parts 4 û 7 treat advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. Extensive applications in Part 7 cover such contemporary areas as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. Each chapter includes review topics.
Download or read book Reactive Extrusion written by Marino Xanthos and published by Oxford University Press, USA. This book was released on 1992 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first published book that combines the applied and fundamental aspects of reactive extrusion, a technology that has seen a tremendous growth in the past few years. It is based on a highly successful advanced technical course given by the authors at the Stevens Institute of Technology Polymer Processing Institute. The use of an extruder as a continuous reactor for processes such as polymerization, polymer modification, and blend compatibilization is gaining increasing popularity and competes with diluent-free operations with respect to efficiency and economics. The first part of the book emphasizes the technological aspects of reactive extrusion. It includes case histories of industrial applications, an analysis of existing continuous processes from reaction fundamentals and an extensive review of polymer modification reactions involving acid and anhydride functionalities and their applications. The second part of the monograph contains an exhaustive survey of virtually all chemical reactions that have been conducted in extruders; the important characteristics of over 600 processes listed in recent technical and patent literature are summarized. The engineering fundamentals of reactive extrusion are included in the third part of the book which features a full description and comparison of available extrusion equipment, heat transfer considerations and the application of polymerization engineering principles to extruder reactions. The book is intended for engineers and technologists involved in this industrially important sector of polymer processing.
Download or read book Twin Screw Extruders written by F. Martelli and published by Springer. This book was released on 2012-02-16 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most books on plastics machinery include a preamble on the origin of such equipment, and some even discuss the origin of plastic itself, dating back to the early 1900s and such men as Leo Baekeland - the real founder of synthetic plastics. There seems therefore, little pur pose in reiterating what has been said before and going over the same ground so adequately covered in a number of books as well as the trade press. We are indebted to the author of this excellent treatise on twin-screw extruders for getting right down to the business at hand. The author makes mention of two pioneers - Roberto Colombo and Carlo Pasquetti - who were the first to develop twin-screw ex truders. It was my good fortune to follow the work of these pioneers, and, interestingly enough, the principles were so good that their work continues to be relevant even to the advanced and more sophisticated models so well defmed in this book.
Download or read book Rubber Extrusion written by B. G. Crowther and published by iSmithers Rapra Publishing. This book was released on 1998 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent changes in Screw extruders for rubber have been driven by demands for accuracy and economy, increased understanding of the underlying principles, and improvements in related technologies such as control systems and computing power. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.
Download or read book Plastics Extrusion Technology Handbook written by Sidney Levy and published by Industrial Press Inc.. This book was released on 1989 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering complete and in-depth data and information on plastics extrusion, this practical handbook presents the technology of the subject rather than the theory. Presents an overview of extrusion technology as applied to the operation of extrusion systems and the design of tooling and equipment for use in the process. Provides basic technical information on the behavior of polymer and plastics materials in the extrusion process. Contains tool descriptions that provide a basis for the analysis of existing product lines as examples for the design of new systems. Includes illustrations of and background material on control systems for the extruder and extrusion process. Fundamentals of the Extrusion Process. Extruder Design, Construction and Operation. Extrusion Dies for Specific Product Lines. Controlling the Extrusion Process. Heat Transfer and Heat Content Considerations. Downstream Equipment and Auxiliary Units for Extrusion Lines. Coextrusion and Dual-Extrusion Technology. Extrusion of Cellular Plastics Products. Extrusion System Design and Integration. On-Line and Computer Control of the Extrusion Process. Plant Design and Operations. Extrusion Products and Processes. Glossary. Index.
Download or read book Engineering Principles of Plasticating Extrusion written by Zehev Tadmor and published by . This book was released on 1970 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Food Processing written by Richard W Hartel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The approach to teaching the concepts of food processing to the undergrad uate food science major has evolved over the past 40 years. In most under graduate food science curricula, food processing has been taught on a commodity basis. In many programs, several courses dealt with processing with emphasis on a different commodity, such as fruits and vegetables, dairy products, meat products, and eggs. In most situations, the emphasis was on the unique characteristics of the commodity and very little empha sis on the common elements associated with processing of the different commodities. Quite often the undergraduate student was allowed to select one or two courses from those offered in order to satisfy the minimum standards suggested by the Institute of Food Technologists. The current 1FT minimum standards suggest that the undergradu ate food science major be required to complete at least one food processing course. The description of this course is as follows: One course with lecture and laboratory which covers general characteristics of raw food materials, principles offood preserva tion, processing factors that influence quality, packaging, water and waste management, and sanitation. Prerequisites: general chemistry, physics, and general microbiology.
Download or read book Extrusion Processing Technology written by Jean-Marie Bouvier and published by John Wiley & Sons. This book was released on 2014-06-23 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extrusion is the operation of forming and shaping a molten or dough-like material by forcing it through a restriction, or die. It is applied and used in many batch and continuous processes. However, extrusion processing technology relies more on continuous process operations which use screw extruders to handle many process functions such as the transport and compression of particulate components, melting of polymers, mixing of viscous media, heat processing of polymeric and biopolymeric materials, product texturization and shaping, defibering and chemical impregnation of fibrous materials, reactive extrusion, and fractionation of solid-liquid systems. Extrusion processing technology is highly complex, and in-depth descriptions and discussions are required in order to provide a complete understanding and analysis of this area: this book aims to provide readers with these analyses and discussions. Extrusion Processing Technology: Food and Non-Food Biomaterials provides an overview of extrusion processing technology and its established and emerging industrial applications. Potency of process intensification and sustainable processing is also discussed and illustrated. The book aims to span the gap between the principles of extrusion science and the practical knowledge of operational engineers and technicians. The authors bring their research and industrial experience in extrusion processing technology to provide a comprehensive, technical yet readable volume that will appeal to readers from both academic and practical backgrounds. This book is primarily aimed at scientists and engineers engaged in industry, research, and teaching activities related to the extrusion processing of foods (especially cereals, snacks, textured and fibrated proteins, functional ingredients, and instant powders), feeds (especially aquafeeds and petfoods), bioplastics and plastics, biosourced chemicals, paper pulp, and biofuels. It will also be of interest to students of food science, food engineering, and chemical engineering. Also available Formulation Engineering of Foods Edited by J.E. Norton, P.J. Fryer and I.T. Norton ISBN 978-0-470-67290-7 Food and Industrial Bioproducts and Bioprocessing Edited by N.T. Dunford ISBN 978-0-8138-2105-4 Handbook of Food Process Design Edited by J. Ahmed and M.S. Rahman ISBN 978-1-4443-3011-3
Download or read book Elastomer Technology Handbook written by Nicholas P. Cheremisinoff and published by CRC Press. This book was released on 2020-07-09 with total page 1113 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elastomer Technology Handbook is a major new reference on the science and technology of engineered elastomers. This contributed volume features some of the latest work by international experts in polymer science and rubber technology. Topics covered include theoretical and practical information on characterizing rubbers, designing engineering elastomers for consumer and engineering applications, properties testing, chemical and physical property characterization, polymerization chemistry, rubber processing and fabrication methods, and rheological characterization. The book also highlights both conventional and emerging market applications for synthetic rubber products and emphasizes the latest technology advancements. Elastomer Technology Handbook is a "must have" book for polymer researchers and engineers. It will also benefit anyone involved in the handling, manufacturing, processing, and designing of synthetic rubbers.
Download or read book Plastics Extrusion Technology written by U. Berghaus and published by Hanser Gardner Publications. This book was released on 1997 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now updated, this industry standard provides information on the aspects and processes of extrusion technology, including design, construction, and operation of extrusion lines. Well-known experts in various fields of extrusion have contributed to this book. As a reference book it will undoubtedly prove a considerable benfit to engineers involved with the extrusion process. “The presentation of this book is excellent and the quantity of information is immense.” Applied Mechanics Review “... this book belongs on the bookshelf of every engineer, operations supervisor and maintenance manager. It is also invaluable for plastic engineering students at all levels.” Polymer News “ ... on a value for money basis it is outstanding.” Plastics & Rubber Weekly
