Download or read book The Chemistry of Gold Extraction written by John Marsden and published by Society for Mining Metallurgy & Exploration. This book was released on 2006 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensively revised and updated, this edition provides the broad base of knowledge required by all working in the gold extraction and gold processing industries. It bridges the gap between research and industry by emphasizing practical applications of chemical principles and techniques.

Download or read book A Process for the Recovery of Gold from Activated Carbon by Leaching and Electrolysis written by J. B. Zadra and published by . This book was released on 1950 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Extraction of Gold III Using Modified Activated Carbon written by and published by . This book was released on 2009 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: The activated carbons were modified with various potentially gold binding reagents by impregnation technique and their extraction efficiencies toward gold were evaluated. Tetrabutyl ammonium iodide (TBA) was found to be the most effective adsorbent for gold in terms of both extraction efficiency and speed. Various parameters were optimized around the preparation and utilization of this modified carbon in both batch and column methods. Several interfering ions commonly found in gold waste samples were found to have absolutely no effects to the extraction of gold. The adsorption isotherm was studied but no definite relation to any model was established. The breakthrough curve was used to demonstrate the improvement in gold extraction of the TBA-impregnated carbon over a commercial activated carbon and determine the adsorption capacity. The breakthrough capacity of the TBA-carbon and the commercial carbon were 90.62 and 18.00 mg/g respectively. The TBA-carbon was successfully applied to the recovery of gold from a real industrial waste sample.

Download or read book Gold Metallurgy and the Environment written by Sadia Ilyas and published by CRC Press. This book was released on 2018-02-19 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an overview of all the gold extraction processes along with their mechanistic study and environmental impact. Reviews extraction techniques previously employed as well as recently evolved technology for gold leaching, provides technical flow sheets for processing of ores with a diversity of lixiviants and offers a compulsory overview of every gold processing technique It also discusses recent integrated techniques including hydro- and bio-metallurgical techniques with examples

Download or read book Carbon in pulp Technology for the Extraction of Gold written by and published by . This book was released on 1982 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Recovery Of Gold From Secondary Sources written by Syed Sabir and published by World Scientific. This book was released on 2016-06-29 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: New discoveries of the properties of gold at a nanoscale, and its effective use in modern technologies, have been driving a virtual 'gold rush'. Depleting natural resources has meant that the recovery of gold continues to grow in importance and relevance.The Recovery of Gold from Secondary Sources analyses the most advanced technology in gold recovery and recycling from spent sources of mobile phones, unwanted electronic equipment and waste materials. State-of-the-art techniques of hydrometallurgical and bio-metallurgical processing, leaching, cementing, adsorbing and separation through bio-sorbents are all described in detail, providing a guide for students and researchers. Discussion of environmentally friendly methods of recovery are presented, in order to provide modern-day alternatives to previous techniques. For those interested in the study of gold recovery this book gives a comprehensive overview of current recovery, making it the ultimate source of information for students, researchers, chemists, metallurgists, environmental scientists and electronic waste recovery experts.

Download or read book Processing Gold Ores Using Heap Leach carbon Adsorption Methods written by Harold J. Heinen and published by . This book was released on 1978 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Oxidation Process for Improving Gold Recovery from Carbon bearing Gold Ores written by Bernard J. Scheiner and published by . This book was released on 1971 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Process for Recovering Gold and Silver from Activated Carbon by Leaching and Electrolysis written by J. B. Zadra and published by . This book was released on 1952 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gold written by Nathaniel Arbiter and published by CRC Press. This book was released on 1990 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The eight articles first appeared as volume 6 (no date) of Mineral processing and extractive metallurgy review. They review new methods of recovery for gold, and to some extent, silver, focus on the particular challenges of extraction from carbonaceous ores and from various sulfide-bearing ore, and the treatment of refractory gold ore, and discuss high-temperature and biological oxidation, high- temperature chlorination, and removing metals from leach liquor. Book club price, $40. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book Extraction of Precious Metals on Activated Carbon written by and published by . This book was released on 1987 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgical interest in activated carbon as an extractant for precious metals is related principally to its use in gold recovery processes, and therefore this review focuses largely on the extraction of gold. Since activated carbon is also an efficient scavenger of certain silver metal complexes, some attention is also given to silver.

Download or read book Gold Recovery Using Activated Carbon written by and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrolytic Oxidation of Carbonaceous Ores for Improving Gold Recovery written by Bernard J. Scheiner and published by . This book was released on 1969 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Process for the Recovery of Gold from Activated Carbon by Leaching and Electrolysis written by and published by . This book was released on 1950 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Extractive Metallurgy of Gold written by John C. Yannopoulos and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: The history of gold begins in antiquity. Bits of gold were found in Spanish caves that were used by Paleolithic people around 40,000 B.C. Gold is the "child of Zeus," wrote the Greek poet Pindar. The Romans called the yellow metal aurum ("shining dawn"). Gold is the first element and first metal mentioned in the Bible, where it appears in more than 400 references. This book provides the most thorough and up-to-date information available on the extraction of gold from its ores, starting with the miner alogy of gold ores and ending with details of refining. Each chapter con cludes with a list of references including full publication information for all works cited. Sources preceded by an asterisk (*) are especially recom mended for more in-depth study. Nine appendices, helpful to both students and operators, complement the text. I have made every attempt to keep abreast of recent technical literature on the extraction of gold. Original publications through the spring of 1989 have been reviewed and cited where appropriate. This book is intended as a reference for operators, managers, and designers of gold mills and for professional prospectors. It is also designed as a textbook for extractive metallurgy courses. I am indebted to the Library of Engineering Societies in New York, which was the main source of the references in the book. The assistance of my son, Panos, in typing the manuscript is gratefully acknowledged.

Download or read book Experimental Extraction of Gold and Silver from California and Nevada Ores written by Abraham L. Engel and published by . This book was released on 1961 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Au gold Recovery Using an Activated Carbon Column written by and published by . This book was released on 1986 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The feasibility of a process involving the use of activated carbon in a multi-stage column (NIMCIX contactor) for the recovery of gold from unclarified pregnant solutions was investigated on pilot-plant scale. It was found that satisfactory extractions, corresponding to a recovery of 99,6 per cent, can be achieved with an average gold concentration of 0,0077 p.p.m. in the barren solutions from a feed averaging 1,89 p.p.m. The results show that excessive loading of CaCO3 can be prevented by lowering of the pH of the feed to about 7,6. This obviates the need for the carbon to be treated with hydrochloric acid. The gold was eluted from the carbon by the Zadra procedure. The operating conditions of the elution and electrowinning circuits are reported, and the elution of the gold and other metals is discussed. The reactivation of the carbon, which was carried out in a vibrating-deck kiln, is described, and the effects of this reactivation on the activity of the carbon and its microstructure are also discussed. The consumption of reagents in the adsorption and elution circuits is presented in sufficient detail to allow the potential of the activated-carbon process as an alternative to the Merill-Crowe process for the treatment of high-grade solutions to be evaluated. In addition, the results of parallel small-scale investigations on the effect of pH on the loading of CaCO3, gold, and other metals on activated carbon are presented and discussed briefly.