Download or read book Extraction Metallurgy 85 written by and published by . This book was released on 1985 with total page 1144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Chemistry of Gold Extraction written by John Marsden and published by SME. This book was released on 2006 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensively revised and updated, this edition provides the broad base of knowledge required by all working in the gold extraction and gold processing industries. It bridges the gap between research and industry by emphasizing practical applications of chemical principles and techniques.
Download or read book Extractive Metallurgy of Copper written by Anil Kumar Biswas and published by Oxford ; Toronto : Pergamon. This book was released on 1980 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extractive Metallurgy of Activated Minerals written by P. Baláž and published by Elsevier. This book was released on 2000-04-28 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical activation of solids is a part of mechanochemistry, the science with a sound theoretical foundation exhibiting a wide range of potential application. Mechanical activation itself is an innovative procedure where an improvement in technological processes can be attained via a combination of new surface area and defects formation in minerals. Mechanical activation is of exceptional importance in extractive metallurgy and mineral processing and this area forms the topic of this book and is the result of more than twenty years of research and graduate teaching in the field. In pyrometallurgy, the mechanical activation of minerals makes it possible to reduce their decomposition temperatures or causes such a degree of disordering that the thermal activation may be omitted entirely. The potential mitigation of environmental pollutants is becoming increasingly important in this context. The lowering of reaction temperatures, the increase of the rate and amount of solubility, preparation of water soluble compounds, the necessity for simpler and less expensive reactors and shorter reaction times are some of the advantages of mechanical activation in hydrometallurgy. The environmental aspects of these processes are particularly attractive. Several industrial processes are examined and their flowsheets are presented as succesful of activation. In these processes, the introduction of a mechanical activation step into the technological cycle significantly modifies the subsequent steps. The book is designed for researchers, teachers, operators and students in the areas of extractive metallurgy, mineral processing, mineralogy, solid state chemistry and materials science.It will encourage newcomers to the mechanochemistry to do useful research and discover novel applications in this field.
Download or read book Extractive Metallurgy 2 written by Alain Vignes and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extractive metallurgy is the art and science of extracting metals from their ores and refining them. The production of metals and alloys from these source materials is still one of the most important and fundamental industries in both developed and developing economies around the world. The outputs and products are essential resources for the metallic, mechanical, electromagnetic, electrical and electronics industries (silicon is treated as a metal for these purposes). This series is devoted to the extraction of metals from ores, concentrates (enriched ores), scraps, and other sources and their refining to the state of either liquid metal before casting or to solid metals. The extraction and refining operations that are required may be carried out by various metallurgical reaction processes. Extractive Metallurgy 1 deals with the fundamentals of thermodynamics and kinetics of the reaction processes. Extractive Metallurgy 2 focuses on pyrometallurgical, hydrometallurgical, halide and electro-metallurgical (conversion) processes. Extractive Metallurgy 3 deals with the industrial processing operations, technologies, and process routes, in other words the sequence of steps or operations used to convert the ore to metal. Processes and operations are studied using the methodology of "chemical reaction engineering". As the fundamentals of the art and science of Extractive Metallurgy are infrequently taught as dedicated university or engineering schools courses, this series is intended both for students in the fields of Metallurgy and Mechanical Engineering who want to acquire this knowledge, and also for engineers put in charge of the operation of an industrial production unit or the development of a new process, who will need the basic knowledge of the corresponding technology.
Download or read book The Extractive Metallurgy of Gold written by John C. Yannopoulos and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: The history of gold begins in antiquity. Bits of gold were found in Spanish caves that were used by Paleolithic people around 40,000 B.C. Gold is the "child of Zeus," wrote the Greek poet Pindar. The Romans called the yellow metal aurum ("shining dawn"). Gold is the first element and first metal mentioned in the Bible, where it appears in more than 400 references. This book provides the most thorough and up-to-date information available on the extraction of gold from its ores, starting with the miner alogy of gold ores and ending with details of refining. Each chapter con cludes with a list of references including full publication information for all works cited. Sources preceded by an asterisk (*) are especially recom mended for more in-depth study. Nine appendices, helpful to both students and operators, complement the text. I have made every attempt to keep abreast of recent technical literature on the extraction of gold. Original publications through the spring of 1989 have been reviewed and cited where appropriate. This book is intended as a reference for operators, managers, and designers of gold mills and for professional prospectors. It is also designed as a textbook for extractive metallurgy courses. I am indebted to the Library of Engineering Societies in New York, which was the main source of the references in the book. The assistance of my son, Panos, in typing the manuscript is gratefully acknowledged.
Download or read book Extractive Metallurgy of Niobium written by A.K. Suri and published by Routledge. This book was released on 2017-11-13 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth and development witnessed today in modern science, engineering, and technology owes a heavy debt to the rare, refractory, and reactive metals group, of which niobium is a member. Extractive Metallurgy of Niobium presents a vivid account of the metal through its comprehensive discussions of properties and applications, resources and resource processing, chemical processing and compound preparation, metal extraction, and refining and consolidation. Typical flow sheets adopted in some leading niobium-producing countries for the beneficiation of various niobium sources are presented, and various chemical processes for producing pure forms of niobium intermediates such as chloride, fluoride, and oxide are discussed. The book also explains how to liberate the metal from its intermediates and describes the physico-chemical principles involved. It is an excellent reference for chemical metallurgists, hydrometallurgists, extraction and process metallurgists, and minerals processors. It is also valuable to a wide variety of scientists, engineers, technologists, and students interested in the topic.
Download or read book Extractive Metallurgy of Niobium written by A.K. Suri and published by Routledge. This book was released on 2017-11-13 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth and development witnessed today in modern science, engineering, and technology owes a heavy debt to the rare, refractory, and reactive metals group, of which niobium is a member. Extractive Metallurgy of Niobium presents a vivid account of the metal through its comprehensive discussions of properties and applications, resources and resource processing, chemical processing and compound preparation, metal extraction, and refining and consolidation. Typical flow sheets adopted in some leading niobium-producing countries for the beneficiation of various niobium sources are presented, and various chemical processes for producing pure forms of niobium intermediates such as chloride, fluoride, and oxide are discussed. The book also explains how to liberate the metal from its intermediates and describes the physico-chemical principles involved. It is an excellent reference for chemical metallurgists, hydrometallurgists, extraction and process metallurgists, and minerals processors. It is also valuable to a wide variety of scientists, engineers, technologists, and students interested in the topic.
Download or read book Extractive Metallurgy of Nickel Cobalt and Platinum Group Metals written by Frank Crundwell and published by Elsevier. This book was released on 2011-07-18 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes and explains the methods by which three related ores and recyclables are made into high purity metals and chemicals, for materials processing. It focuses on present day processes and future developments rather than historical processes. Nickel, cobalt and platinum group metals are key elements for materials processing. They occur together in one book because they (i) map together on the periodic table (ii) occur together in many ores and (iii) are natural partners for further materials processing and materials manufacturing. They all are, for example, important catalysts – with platinum group metals being especially important for reducing car and truck emissions. Stainless steels and CoNiFe airplane engine super alloys are examples of practical usage. The product emphasises a sequential, building-block approach to the subject gained through the author's previous writings (particularly Extractive Metallurgy of Copper in four editions) and extensive experience. Due to the multiple metals involved and because each metal originates in several types of ore – e.g. tropical ores and arctic ores this necessitates a multi-contributor work drawing from multiple networks and both engineering and science. - Synthesizes detailed review of the fundamental chemistry and physics of extractive metallurgy with practical lessons from industrial consultancies at the leading international plants - Discusses Nickel, Cobalt and Platinum Group Metals for the first time in one book - Reviews extraction of multiple metals from the same tropical or arctic ore - Industrial, international and multidisciplinary focus on current standards of production supports best practice use of industrial resources
Download or read book Hydrometallurgy in Extraction Processes Volume I written by T.K. Mukherjee and published by Routledge. This book was released on 2019-01-22 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set provides a full account of hydrometallurgy. Filled with illustrations and tables, this work covers the flow of source material from the mined or concentrate state to the finished product. It also highlights ion exchange, carbon adsorption and solvent extraction processes for solution purification and concentration. The extensive
Download or read book SME Mineral Processing and Extractive Metallurgy Handbook written by Courtney A. Young and published by Society for Mining, Metallurgy & Exploration. This book was released on 2019-02-01 with total page 2258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This landmark publication distills the body of knowledge that characterizes mineral processing and extractive metallurgy as disciplinary fields. It will inspire and inform current and future generations of minerals and metallurgy professionals. Mineral processing and extractive metallurgy are atypical disciplines, requiring a combination of knowledge, experience, and art. Investing in this trove of valuable information is a must for all those involved in the industry—students, engineers, mill managers, and operators. More than 192 internationally recognized experts have contributed to the handbook’s 128 thought-provoking chapters that examine nearly every aspect of mineral processing and extractive metallurgy. This inclusive reference addresses the magnitude of traditional industry topics and also addresses the new technologies and important cultural and social issues that are important today. Contents Mineral Characterization and AnalysisManagement and ReportingComminutionClassification and WashingTransport and StoragePhysical SeparationsFlotationSolid and Liquid SeparationDisposalHydrometallurgyPyrometallurgyProcessing of Selected Metals, Minerals, and Materials
Download or read book EXTRACTIVE METALLURGY written by DUTTA, SUJAY KUMAR and published by PHI Learning Pvt. Ltd.. This book was released on 2018-01-01 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: Primarily intended for the undergraduate students of metallurgical and materials engineering, this textbook will help the students to grasp the subject matter of extractive metallurgy in a simple and easy-to-understand manner. It presents a comprehensive view of extractive metallurgy, especially principles and fundamental aspects, in a concise form. The book explains various concepts step by step by narrating their importance. Even without much of background in specialized subjects, the students will be able to understand the topics without any difficulty. It covers a brief summary of the metallurgical processes including physical chemistry, thermodynamics, kinetics, and heat/mass balance. Many of the scientific and engineering aspects of unit processes have been discussed. Applications of metallurgical thermodynamics and kinetics to the process metallurgy are explained as well. All basic concepts and definitions related to metal extraction are also covered.
Download or read book Availability of Platinum and Platinum group Metals written by Catharine T. Fogg and published by . This book was released on 1993 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Mining Journal Railway and Commercial Gazette written by and published by . This book was released on 1898 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrometallurgy in Extraction Processes written by C. K. Gupta and published by CRC Press. This book was released on 1990-08-15 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set provides a full account of hydrometallurgy. Filled with illustrations and tables, this work covers the flow of source material from the mined or concentrate state to the finished product. It also highlights ion exchange, carbon adsorption and solvent extraction processes for solution purification and concentration. The extensive reference list-over 850-makes this set a valuable resource for extraction and process metallurgists, researchers, and practitioners.
Download or read book Hydrometallurgy in Extraction Processes Volume II written by C. K. Gupta and published by Routledge. This book was released on 2017-11-01 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set provides a full account of hydrometallurgy. Filled with illustrations and tables, this work covers the flow of source material from the mined or concentrate state to the finished product. It also highlights ion exchange, carbon adsorption and solvent extraction processes for solution purification and concentration. The extensive reference list-over 850-makes this set a valuable resource for extraction and process metallurgists, researchers, and practitioners.
Download or read book Geo Platinum 87 written by H.M. Prichard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Geo-Platinum 87 Symposium, held at the Open University during April 1987, was designed as a forum for presentation of new research results on the occurrence, genesis, geochemistry, mineralogy and analysis of the platinum-group elements (PGE). With the support of the Open University and the Mineral Industry Research Organisation, the symposium was attended by 115 representatives of university departments, research institutions and members of the mining and mineral exploration industries. An introduction to the symposium was provided by two invited papers from C. J. Morrissey (Riofinex North) and C. R. N. Clark (Johnson Matthey) which were designed to give perspective to the goals of PGE research work. The first of these papers gave a provocative insight into the aims and objectives of an exploration manager, examining the influence of supply, demand and perceived world reserves on exploration strategy. The second invited paper gave a valuable view of the industrial uses, market trends and predicted changes in the commercial value of the platinum-group elements from the standpoint of a refining company and supplier. These invited papers are reproduced in this volume and are followed by twenty four full papers and twenty abstracts that reflect the wide range of research topics presented at the symposium.
