Download or read book Historic Preservation Technology written by Robert A. Young and published by John Wiley & Sons. This book was released on 2008-03-21 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introduction to historic preservation goes well beyond the Secretary of the Interior's Standards for Rehabilitation and shows how wood, stone, masonry, and metal were used in the past and how adaptive re-use can be employed to bring modern amenities to historic structures. The book covers all aspects of the exterior and interior building fabric, including windows, roofing, doors, porches, and electrical and mechanical systems for both residential and small-scale commercial buildings. Richly illustrated with photographs showing typical elements of historic buildings, decay mechanisms, and remediation techniques, the book also contains a variety of useful case studies and features a companion Website that offers dozens of additional images and resources.

Download or read book Estimating for Building Civil Engineering Work written by John Williams and published by Routledge. This book was released on 2013-02-01 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: It deals in a practical and reasonable way with many of the estimating problems which can arise where building and civil engineering works are carried out and to include comprehensive estimating data within the guidelines of good practice. The early part of the book has been completely rewritten to contain chapters useful to students and practitioners alike for the development of the estimating process resulting in the presentation of a tender for construction works. The second and major part of the book contains estimating data fully updated for the major elements in building and civil engineering work, including a new chapter on piling, and a wealth of constants for practical use in estimating. The estimating examples are based on the current edition of the Standard Method of Measurement for Building Works (SMM7). The comprehensive information on basic principles of estimating found in 'Spence Geddes' are still as valid today as the first edition. In this edition the prevailing rates of labour and costs of materials are taken whenever possible as a round figure. Readers will appreciate in the construction industry that prices are continually changing, rise and fall, and that worked examples should therefore be used as a guide to method of calculation substituting in any specific case the current rates applicable to it. In the case of plant output dramatic increases have been experienced in productivity over recent years and again estimators with their own records should substitute values appropriate to their work.

Download or read book American Artisan written by and published by . This book was released on 1922 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Snow Country written by and published by . This book was released on 1990-12 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the 87 issues of Snow Country published between 1988 and 1999, the reader can find the defining coverage of mountain resorts, ski technique and equipment, racing, cross-country touring, and the growing sport of snowboarding during a period of radical change. The award-winning magazine of mountain sports and living tracks the environmental impact of ski area development, and people moving to the mountains to work and live.

Download or read book Estimating for Building and Civil Engineering Works written by Spence Geddes and published by Routledge. This book was released on 1996 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the latest edition of a standard reference work on estimating. It deals in a practical way with many of the estimating problems which arise where building and civil engineering works are carried out.

Download or read book Fundamentals of Building Construction written by Edward Allen and published by John Wiley & Sons. This book was released on 2011-10-24 with total page 1674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its Fifth Edition, this essential textbook has been used by thousands of students annually in schools of architecture, engineering, and construction technology. The bestselling reference focuses on the basic materials and methods used in building construction, emphasizing common construction systems such as light wood frames, masonry bearing walls, steel frames, and reinforced concrete. New introductory material on the processes, organization, constraints, and choices in construction offers a better look at the management of construction. New sections covering the building envelope uncover the secrets to designing enclosures for thermal insulation, vapor retarders, air barriers, and moisture control. The Fifth Edition also features more axonometric detail drawings and revised photographs for a thoroughly illustrated approach and the latest IBC 2006, CSI MasterFormat, ASTM references, and LEED information.

Download or read book Specifications in Detail written by Frank W. Macey and published by Routledge. This book was released on 2015-10-06 with total page 1253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sir Roger Pratt's "Rules for the Guidance of Architects", written on 7 December 1665, included the following statements which embody succinctly the principles of the specification of building works and indeed of contract administration, and are as true today as they were nearly 350 years ago: To determine anything without due premeditation is rashness. Not to come to any determination in a convenient time is an effect either of ignorance or sloth. To wittingly omit to do that at the first, which at last we shall be forced to, at our greater disadvantage, is the extremity of folly. To be so forward in premeditation as to make no trade at a stand for want of direction, which will cause great repining etc. and to be careful to see them exactly performed, for otherwise all trades will be at catch with him. To contrive all things with the most orderly thrift and longest duration. However, Pratt seems to have relied on entrusting the works to known competent workmen rather than incorporating these wise principles in a written specification. This method of working appears to have continued until the rise of the general contractor in the nineteenth century when a written specification became an essential part of the design process. The specification was needed to describe the materials to be used and ways of working them and to ensure comparability of tenders, particularly for public works. This encouraged books on specifications, starting with Alfred Bartholomew's "Specifications for Practical Architecture" in 1840, revised in 1846. It began with a long 'essay on the decline of excellence in the structure and in the science of modern English buildings with the proposal of remedies for those defects'. This was followed by 54 specifications for various types and classes of buildings, notes on various materials, and an alphabetical digest of the London Building Act, with a comprehensive index - a multi-purpose book, like many of its successors. Noting that Bartholomew was no longer in print, T. L. Donaldson was prompted to produce his Handbook of Specifications in 1859, in which, after setting out the principles of specification writing, he reproduced 46 specifications for actual buildings and other works by his illustrious contemporaries. This included the "Houses of Parliament" by Sir Charles Barry and "Newcastle High Level Bridge" by Robert Stephenson, and was followed by 136 pages on the law as applied to building matters. This is a fascinating book, invaluable to construction historians, but will have been of less use to authors of specifications than a sequential list of trade-based clauses. Bartholomew's book was revised again, twice, by Frederick Rogers, in 1886 and 1893, but still with a similar 'essay' followed by specifications for various types of building (but now only 27), rather than trade-based clauses, for which we had to wait for the first edition of Macey in 1898. Frank W. Macey's predecessors had a tendency to set out what should be covered in specifications and the ills of poor specification, together with a quantity of information about the use of various materials and construction methods. This was admittedly useful, but better covered in the books on building construction that had started to appear at about the same date, such as Mitchell and Rivingtons (published in facsimile by Donhead in 2004). Macey, by contrast, dived almost straight in to trade-based clauses in a logical order. The specification author in an architect's office must have heaved a sigh of relief when Macey landed on his desk, because here was a book that provided just what he needed to 'cut and paste', in the order he needed it, and with marginal sketches showing how the materials and details were applied. Similarly, students of architecture had a useful source of reference for the work by the various trades, instead of having to look at the trade in each specification when referring to earlier books to decide which example to follow. Contemporary reviews of Macey criticized the book for being 'out of date' as he failed to cover all the latest developments in materials. In hindsight that attitude appears less than fair, because any architect incorporating recently introduced materials, such as reinforced concrete or metal lathing, would make sure he was fully conversant with them and their use, and would be able to describe them adequately as a matter of common prudence. No book would be able to keep up to date with the rapidly developing variety of materials appearing almost daily at the dawn of the Edwardian era. That was more than adequately addressed by the annual (initially quarterly) Specification published by the Architectural Press, which started the same year that the first edition of Macey was published and continued to keep construction professionals informed every year until 1992. Frank Macey revised and enlarged the text in 1904 for the second edition, having published his companion volume on "Conditions of Contract" in 1902, and taking account of criticisms in The Builder's review of his first edition. It is his second edition that this introduction accompanies, having been chosen by Donhead to give us an exhaustive reference to the materials and construction in use at the end of the Victorian era and the dawn of the twentieth century. It will also help us today when drafting specifications for work on buildings that have just passed their centenary. Frank William Macey (1863-1935) practised as an architect in the City of London before emigrating to Canada. He was the first resident architect in Burnaby in British Columbia, where he settled in the first decade of the twentieth century, and obtained a number of commissions from prominent businessmen who were building grand homes in the new community of Deer Lake. He designed predominantly in the British Arts and Crafts style and introduced the use of rough-cast stucco for building exteriors, a characteristic for which he was renowned. He also designed three churches, two of which are still standing. Macey's Specifications in Detail survived his departure to Canada. The third edition, co-authored by J. P. Allen, PASI was published in 1922, and the fourth edition, revised by Donald Brooke, MA BArch ARIBA MIStructE, a Lecturer in Architecture at the University of Liverpool and J. W. Summerfield, FASI MRSanI, a quantity surveyor, was published in 1930, with a second impression in 1937. The fifth edition, revised by the then late Donald Brooke and Stanley Wilkinson, BArch ARIBA, a Senior Lecturer in Architectural Construction at the University of Liverpool, was published in 1955 and takes specification writing through to the introduction of the National Building Specification in 1973, continuing where Macey had started, with trade-based clauses in a logical order. A contemporary reviewer of the first edition praised 'so much that is excellent in the book and so many things explained, of which the young architect would have much difficulty in finding a description in other books'. The fact that Macey gave 'a great amount of practical information as to the details of construction on points which are not usually to be met with in text books' means that this facsimile should find a place on the bookshelves of construction professionals from all disciplines today, alongside Donhead's other facsimiles, as a well indexed guide to what they can expect to find when working on late Victorian and Edwardian buildings. Students of conservation practice may like to note this comment from the same contemporary reviewer: It may, therefore, be looked upon as a guide to the young architect in practical matters, quite as much as a model for specification writing. It indeed attempts to furnish the novice with the knowledge that he ought to possess before sitting down to write a specification. If Macey's book was valued a hundred years ago for these reasons, there is all the more reason today to use it as a reliable reference to what will be found in buildings that have celebrated their centenary. Lawrance Hurst August 2009.

Download or read book Structural Steel written by Skelton (R.A.) & Co and published by . This book was released on 1915 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Specifications in Detail written by Frank William Macey and published by . This book was released on 1922 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book architctural building construction written by and published by CUP Archive. This book was released on with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A collection of the public general statutes passed in the year of the reign of Her Majesty Queen Victoria written by Great Britain and published by . This book was released on 1844 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modern Construction Handbook written by Andrew Watts and published by Birkhäuser. This book was released on 2016-05-24 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Construction Handbook has become a modern classic of building construction literature. In the USA, it is used as a reference work for many architectural courses. With the chapters "Material", "Wall", "Roof", "Structure", "Environment" and "Applications" it systematically explores the subject and provides a clear and efficient structure to the reader. For the fourth edition, many of the 3D illustrations have been updated and, likewise, the technical information has been brought up to date. "Applications" showcases current developments, such as those relating to mass customization manufacture of components, and presents material and construction innovations. A compact and systematic handbook filled with information, produced for students and young architects alike.

Download or read book Geology The Coast Ranges written by Josiah Dwight Whitney and published by BoD – Books on Demand. This book was released on 2024-05-15 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geology The Coast Ranges written by Geological Survey of California and published by . This book was released on 1882 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Buildings for Small Holdings written by Thomas Potter and published by . This book was released on 1909 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Architecture and Construction in Steel written by Alan Blanc and published by Taylor & Francis. This book was released on 2003-09-02 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guide to the successful use of steel in building and will form a unique source of inspiration and reference for all those concerned with architecture in steel.

Download or read book The American Artisan written by and published by . This book was released on 1922 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: