Download or read book Physical Modelling in Geotechnics Volume 1 written by Andrew McNamara and published by CRC Press. This book was released on 2018-07-11 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.
Download or read book Rock Slope Engineering written by Duncan C. Wyllie and published by CRC Press. This book was released on 2017-09-18 with total page 803 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Slope Engineering covers the investigation, design, excavation and remediation of man-made rock cuts and natural slopes, primarily for civil engineering applications. It presents design information on structural geology, shear strength of rock and ground water, including weathered rock. Slope design methods are discussed for planar, wedge, circular and toppling failures, including seismic design and numerical analysis. Information is also provided on blasting, slope stabilization, movement monitoring and civil engineering applications. This fifth edition has been extensively up-dated, with new chapters on weathered rock, including shear strength in relation to weathering grades, and seismic design of rock slopes for pseudo-static stability and Newmark displacement. It now includes the use of remote sensing techniques such as LiDAR to monitor slope movement and collect structural geology data. The chapter on numerical analysis has been revised with emphasis on civil applications. The book is written for practitioners working in the fields of transportation, energy and industrial development, and undergraduate and graduate level courses in geological engineering.
Download or read book Soil Liquefaction During Earthquakes written by I. M. Idriss and published by . This book was released on 2008 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Centrifuges in Soil Mechanics written by W.H. Craig and published by CRC Press. This book was released on 2020-08-26 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains technical papers, presented in a discussion session at the XI International Conference on Soil Mechanics and Foundation Engineering held in San Francisco in 1985, on the role of centrifuge in geotechnical testing, with descriptions of test facilities.
Download or read book Dynamic Soil structure Interaction written by John P. Wolf and published by Prentice Hall. This book was released on 1985 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Critical State Soil Mechanics written by Andrew Noel Schofield and published by . This book was released on 1968 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ground Improvement Third Edition written by Klaus Kirsch and published by CRC Press. This book was released on 2012-11-26 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: When finding another location, redesigning a structure, or removing troublesome ground at a project site are not practical options, prevailing ground conditions must be addressed. Improving the ground—modifying its existing physical properties to enable effective, economic, and safe construction—to achieve appropriate engineering performance is an increasingly successful approach. This third edition of Ground Improvement provides a comprehensive overview of the major ground improvement techniques in use worldwide today. Written by recognized experts who bring a wealth of knowledge and experience to bear on their contributions, the chapters are fully updated with recent developments including advancements in equipment and methods since the last edition. The text provides an overview of the processes and the key geotechnical and design considerations as well as equipment needed for successful execution. The methods described are well illustrated with relevant case histories and include the following approaches: Densification using deep vibro techniques or dynamic compaction Consolidation employing deep fabricated drains and associated methods Injection techniques, such as permeation and jet grouting, soil fracture grouting, and compaction grouting New in-situ soil mixing processes, including trench-mixing TRD and panel-mixing CSM approaches The introductory chapter touches on the historical development, health and safety, greenhouse gas emissions, and two less common techniques: blasting and the only reversible process, ground freezing. This practical and established guide provides readers with a solid basis for understanding and further study of the most widely used processes for ground improvement. It is particularly relevant for civil and geotechnical engineers as well as contractors involved in piling and ground engineering of any kind. It would also be useful for advanced graduate and postgraduate civil engineering and geotechnical students.
Download or read book Design and Construction of Tunnels written by Pietro Lunardi and published by Springer Science & Business Media. This book was released on 2008-02-20 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work illustrates how the Analysis of Controlled Deformation in Rocks and Soils (ADECO-RS) is used in the design and the construction of tunnels. This is a very new and effective way of tunnel construction. The ADECO-RS approach makes a clear distinction between the design and the construction stages and allows reliable forecasts of construction times and costs to be made. It uses the advance core (the core of ground ahead of the face) as a structural tool for the long and short term stabilisation of tunnels, after its rigidity has first been regulated using conservation techniques.
Download or read book Role of Seismic Testing Facilities in Performance Based Earthquake Engineering written by Michael N. Fardis and published by Springer Science & Business Media. This book was released on 2011-10-07 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays research in earthquake engineering is mainly experimental and in large-scale; advanced computations are integrated with large-scale experiments, to complement them and extend their scope, even by coupling two different but simultaneous tests. Earthquake engineering cannot give answers by testing and qualifying few, small typical components or single large prototypes. Besides, the large diversity of Civil Engineering structures does not allow drawing conclusions from only a few tests; structures are large and their seismic response and performance cannot be meaningfully tested in an ordinary lab or in the field. So, seismic testing facilities should be much larger than in other scientific fields; their staff has to be resourceful, devising intelligent ways to carry out simultaneously different tests and advanced computations. To better serve such a mission European testing facilities and researchers in earthquake engineering have shared their resources and activities in the framework of the European project SERIES, combining their research and jointly developing advanced testing and instrumentation techniques that maximize testing capabilities and increase the value of the tests. This volume presents the first outcomes of the SERIES and its contribution towards Performance-based Earthquake Engineering, i.e., to the most important development in Earthquake Engineering of the past three decades. The concept and the methodologies for performance-based earthquake engineering have now matured. However, they are based mainly on analytical/numerical research; large-scale seismic testing has entered the stage recently. The SERIES Workshop in Ohrid (MK) in Sept. 2010 pooled together the largest European seismic testing facilities, Europe’s best experts in experimental earthquake engineering and select experts from the USA, to present recent research achievements and to address future developments. Audience: This volume will be of interest to researchers and advanced practitioners in structural earthquake engineering, geotechnical earthquake engineering, engineering seismology, and experimental dynamics, including seismic qualification.
Download or read book Rock Slope Engineering written by Evert Hoek and published by CRC Press. This book was released on 1981-06-30 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic handbook deals with the geotechnical problems of rock slope design. It has been written for the non-specialist mining or civil engineer, with worked examples, design charts, coverage of more detailed analytical methods, and of the collection and interpretation of geological and groundwater information and tests for the mechanical properties of rock.
Download or read book Advances in Geotechnical Earthquake Engineering written by Abbas Moustafa and published by BoD – Books on Demand. This book was released on 2012-02-10 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book sheds lights on recent advances in Geotechnical Earthquake Engineering with special emphasis on soil liquefaction, soil-structure interaction, seismic safety of dams and underground monuments, mitigation strategies against landslide and fire whirlwind resulting from earthquakes and vibration of a layered rotating plant and Bryan's effect. The book contains sixteen chapters covering several interesting research topics written by researchers and experts from several countries. The research reported in this book is useful to graduate students and researchers working in the fields of structural and earthquake engineering. The book will also be of considerable help to civil engineers working on construction and repair of engineering structures, such as buildings, roads, dams and monuments.
Download or read book A Dictionary of Mining Mineral and Related Terms written by United States. Bureau of Mines and published by . This book was released on 1968 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes about 55,000 individual mining and mineral industry term entries with about 150,000 definitions under these terms.
Download or read book Laboratory Soils Testing written by U.S. Army Corps of Engineers and published by Lulu.com. This book was released on 2007-12-28 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual presents recommended testing procedures for making determinations of the soil properties to be used in the design of civil works projects. It is not intended to be a text book on soils testing or to supplant the judgment of design engineers in specifying procedures to satisfy the requirements of a particular project, although it has been used in basic soil mechanics courses. Test procedures included are Water Content, Unit Weights, Void Ratio, Porosity and Degree Of Saturation, Liquid and Plastic Limits, Shrinkage Limit Test, Grain-size Analysis, Compaction Tests, Permeability Tests, Consolidation Test, Swell and Swell Pressure Tests. Drained Direct Shear Test, Triaxial Compression Tests, Determination of Critical Void Ratio, Unconfined Compression Test, Modified Providence Vibrated Density Test, and Pinhole Erosion Test for Identification of Dispersive Clays.
Download or read book The Environmental Challenges of Nuclear Disarmament written by Thomas E. Baca and published by Springer Science & Business Media. This book was released on 2000-08-31 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book draws together recognized experts from numerous institutions in Western Europe, Eastern Europe, the former Soviet Union, and North America. Nuclear facility decontamination and decommissioning, waste treatment, management and disposal, long-term monitoring and surveillance, and prevention of proliferation are the primary topics discussed, including critical assessments of the existing knowledge and identification of the needs for future collaboration. Proposals are presented for a variety of national and international agencies, and preliminary business plans developed for collaboration with private companies. A network of international projects needs to be financed since it is such projects that will ultimately ease tensions, help solve nuclear waste contamination and security problems, and help pave the road toward nuclear weapons disarmament.
Download or read book Dictionary of Building and Civil Engineering written by Don Montague and published by Taylor & Francis. This book was released on 1996 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dual-language dictionary lists over 20,000 specialist terms in both French and English, covering architecture, building, engineering and property terms. It meets the needs of all building professionals working on projects overseas. It has been comprehensively researched and compiled to provide an invaluable reference source in an increasingly European marketplace.
Download or read book Ground Motions and Soil Liquefaction During Earthquakes written by Harry Bolton Seed and published by . This book was released on 1982 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnics for Transportation Infrastructure written by Ravi Sundaram and published by Springer. This book was released on 2020-08-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the International Symposium on Geotechnics for Transportation Infrastructure (ISGTI 2018). The research papers cover geotechnical interventions for the diverse fields of policy formulation, design, implementation, operation and management of the different modes of travel, namely road, air, rail and waterways. This book will be of interest to academic and industry researchers working in transportation geotechnics, as also to practicing engineers, policy makers, and civil agencies.
