Download or read book Explosions in Complex Geometries written by and published by . This book was released on 2010 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the design and calculation of structures loaded by air blast waves, especially from inside the structure, assumptions on the applied load are needed. This paper presents several simulation methods for the air blast loading of structures and their ability to be used for complex geometries. Experimental-analytical pressure-time functions of spherical load conditions applied to the structure by disregarding the air are not applicable in such cases because they do not account for reflections, shadowing and channelling effects. Fluid calculations, which model also the solid explosive, are very expensive due to the extremely small elements for the explosive and the air nearby. This paper therefore presents a review of a well-known simulation method, which uses a balloon with compressed air instead of the explosive. A procedure is developed which makes it possible to determine the overpressure of such a balloon for a given size of the explosive more accurately than before. The pressure-time function and the impulse-distance function of calculations using this method show good correspondence with experimental-analytical data. The functioning of the method is verified against experimental results.
Download or read book Modelling and Simulation of Gas Explosions in Complex Geometries written by O. Sæter and published by . This book was released on 1998 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Explosion Modelling for Complex Geometries written by Naser Nehzat and published by . This book was released on 1998 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Explosive Shocks in Air written by Gilbert F. Kinney and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: A purpose of science is to organize diversified factual knowledge into a coherent body of information, and to present this from the simplest possible viewpoint. This is a formidable task where our knowledge is incomplete, as it is with explosions. Here one runs the risk of oversimplification, naivete, and incom pleteness. Nevertheless a purpose of this work is to present as simply as possible a general description of the basic nature of explosions. This treatise should be of interest to all who are working with explosives such as used in construction or in demolition work, in mining operations, or in military applications. It should also be of interest to those concemed with disasters such as explosions or earthquakes, to those involved in civil defense precautions, and to those concemed with defense against terrorists. That is, this material should be of interest to all who wish to utilize, or to avoid, the effects of explosions as weil as to those whose interest is primarily scientific in nature.
Download or read book Dust Explosions in the Process Industries written by Rolf K. Eckhoff and published by Elsevier. This book was released on 2003-07-18 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unfortunately, dust explosions are common and costly in a wide array of industries such as petrochemical, food, paper and pharmaceutical. It is imperative that practical and theoretical knowledge of the origin, development, prevention and mitigation of dust explosions is imparted to the responsible safety manager. The material in this book offers an up to date evaluation of prevalent activities, testing methods, design measures and safe operating techniques. Also provided is a detailed and comprehensive critique of all the significant phases relating to the hazard and control of a dust explosion. An invaluable reference work for industry, safety consultants and students. - A completely new chapter on design of electrical equipment to be used in areas containing combustible/explosible dust - A substantially extended and re-organized final review chapter, containing nearly 400 new literature references from the years 1997-2002 - Extensive cross-referencing from the original chapters 1-7 to the corresponding sections of the expanded review chapter
Download or read book Modeling Explosions and Blast Waves written by K. Ramamurthi and published by Springer Nature. This book was released on 2021-06-19 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: b="" The book provides a concise description of the physical processes and mathematical models for explosions and formation of blast waves from explosions. The contents focus on quantitatively determining the energy released in the different types of explosions and the destructive blast waves that are generated. The contribution of flames, detonations and other physical processes to the explosion phenomenon is dealt with in detail. Gaseous and condensed phase explosions are discussed and the yield of explosions with their TNT equivalence is determined. Time scales involved in the explosion process and the scaling procedure are ascertained. Explosions over the ground, in water, and the interaction of explosions with objects are examined. In order to keep the text easily readable, the detailed derivation of the mathematical equations is given in the seven appendices at the end of the book. Case studies of various explosions are investigated and simple problems and their solutions are provided for the different topics to assist the reader in internalizing the explosion process. The book is a useful reference for professionals and academics in aeronautics, mechanical, civil and chemical engineering and for personnel working in explosive manufacture and high-energy materials, armaments, space, defense, and industrial and fire safety.
Download or read book Prevention of Hazardous Fires and Explosions written by V.E. Zarko and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Besides its obvious destructive potential, military R&D also serves to protect human lives, equipment and facilities against the effects of weapons. Concepts have therefore been developed that improve safety of stationary and mobile facilities against pressure waves, thermal radiation and fire. Effective, fast fire extinguishing equipment has been designed for tank compartments and motors. Closed buildings are demolished and landmines are removed with gas and dust explosions. Stringent safety requirements have been developed for the production of ammunition and explosives. Military and related industries have accumulated a vast knowledge and sophisticated experience that are very valuable in a variety of civil applications. The knowledge is based on theoretical and experimental research work, the origin of which sometimes dates back many centuries. It has often been classified and therefore has remained unknown to the civilian population, until now.
Download or read book Explosion Blast Response of Composites written by Adrian P. Mouritz and published by Woodhead Publishing. This book was released on 2017-05-22 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explosion Blast Response of Composites contains key information on the effects of explosions, shock waves, and detonation products (e.g. fragments, shrapnel) on the deformation and damage to composites. The book considers the blast response of laminates and sandwich composites, along with blast mitigation of composites (including coating systems and energy absorbing materials). Broken down under the following key themes: Introduction to explosive blast response of composites, Air explosion blast response of composites, Underwater explosion blast response of composites, and High strain rate and dynamic properties of composites, the book deals with an important and contemporary topic due to the extensive use of composites in applications where explosive blasts are an ever-present threat, such as military aircraft, armoured vehicles, naval ships and submarines, body armour, and other defense applications. In addition, the growing use of IEDs and other types of bombs used by terrorists to attack civilian and military targets highlights the need for this book. Many terrorist attacks occur in subways, trains, buses, aircraft, buildings, and other civil infrastructure made of composite materials. Designers, engineers and terrorist experts need the essential information to protect civilians, military personnel, and assets from explosive blasts. - Focuses on key aspects, including both modeling, analysis, and experimental work - Written by leading international experts from academia, defense agencies, and other organizations - Timely book due to the extensive use of composites in areas where explosive blasts are an ever-present threat in military applications
Download or read book Explosion Hazards in the Process Industries written by Rolf K. Eckhoff and published by Gulf Professional Publishing. This book was released on 2016-06-14 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explosion Hazards in the Process Industries, Second Edition, delivers the most current and comprehensive content for today's process engineer. Process safety and petrochemical engineers inherently accept that there is a risk of explosions when working on process facilities such as plants and refineries. Yet many that enter this field do not have a fundamental starting point to understand the nature of explosions, and there are a lot of misconceptions and impartial information in the market. Explosion Hazards in the Process Industries, Second Edition, answers this need by providing engineers and consultants a go-to reference and training guide to understand the principles of explosions, what causes them, and how to mitigate and prevent them from reoccurring. Enhanced to include new chapters on BLEVE (Boiling Liquid Expanding Vapor Explosions), water vapor explosions, and destructive effects from accidental explosions, this guide continues to fulfill a comprehensive introduction to the subject, rounded out with new case studies, references, and a discussion on methods of hazard and risk analysis. - Eckoff, Dust Explosions in the Process Industries, 3rd Edition, 9780750676021, Jun 2003, $240.00 - Amyotte, An Introduction to Dust Explosions, 9780123970077, Jun 2013, $49.95 - Barton, Dust Explosion Prevention and Protection, 9780750675192, Mar 2002, $155.00 - Nolan, Handbook of Fire and Explosion Protection Engineering Handbook Principles, 3rd, 9780323313018, May 2014, $160.00
Download or read book The Gas Dynamics of Explosions written by John H. S. Lee and published by Cambridge University Press. This book was released on 2016-07-21 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explosions, and the non-steady shock propagation associated with them, continue to interest researchers working in different fields of physics and engineering (such as astrophysics and fusion). Based on the author's course in shock dynamics, this book describes the various analytical methods developed to determine non-steady shock propagation. These methods offer a simple alternative to the direct numerical integration of the Euler equations and offer a better insight into the physics of the problem. Professor Lee presents the subject systematically and in a style that is accessible to graduate students and researchers working in shock dynamics, combustion, high-speed aerodynamics, propulsion and related topics.
Download or read book Understanding Explosions written by Daniel A. Crowl and published by John Wiley & Sons. This book was released on 2010-08-13 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are many different types of explosions, each with its own complex mechanism. Understanding explosions is important in preventing them. This reference provides valuable information on explosions for everyone involved in the operation, design, maintenance, and management of chemical processes, helping enhance understanding of the nature of explosions and the practical methods required to prevent them from occurring. The text includes: Fundamental basis for explosions Explosive and flammable behavior and characteristics of materials Different types of explosions Fire and explosion hazard recognition Practical methods for preventing explosions or minimizing the potential consequences Additional references Understanding Explosions provides a practical understanding of explosion fundamentals, including the different types of explosions, the explosive and flammable behavior of materials, and the hazards related to fires and explosions. It also discusses practical methods to prevent and minimize the probability and consequence of an explosion during routine use of flammable, combustible and/or reactive materials.
Download or read book Dynamic Aspects of Explosion Phenomena written by A. L. Kuhl and published by AIAA. This book was released on 1993 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Risk Analysis of Vapour Cloud Explosions for Oil and Gas Facilities written by Guowei Ma and published by Springer. This book was released on 2019-05-11 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on describing and applying risk analysis of vapour cloud explosions (VCEs) in various oil and gas facilities, such as petrol stations, processing plants, and offshore platforms. Discussing most of the complicated features of gas explosion accidents, the book studies in detail the gas explosion risk analysis approaches of different oil and gas facilities in order to develop more accurate, detailed, efficient and reliable risk analysis methods for VCEs under different conditions. Moreover, it introduces an advanced overpressure approach to predict VCEs using computational fluid dynamics (CFD) modelling, and details applications of CFD using a FLame ACceleration Simulator (FLACS). The book is intended for researchers and organisations engaged in risk and safety assessments of VCEs in the oil and gas industry.
Download or read book Explosions in Air written by Wilfred Edmund Baker and published by . This book was released on 1973 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Explosive Loading of Engineering Structures written by P.S. Bulson and published by CRC Press. This book was released on 1997-07-24 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the development of research into the explosive loading of structures, mainly since the beginning of the twentieth century. Major contributions in the fields of measurement, analysis and prediction are discussed. Dynamic loading from conventional high explosives is examined, as well as the effects of liquid propellant, dust, gas, vapour, and fuel/air explosions. Subjects include blast in tunnels, underground and underwater explosions, pressure measurement and blast stimulation. Explosive effects on civil buildings, civil bridges, aircraft and ships are summarized, including the estimation of residual strength. The concluding passages refer to structural safety and reliability.
Download or read book Explosion Hazards and Evaluation written by W.E. Baker and published by Elsevier. This book was released on 2012-12-02 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explosion Hazards and Evaluation presents the principles and applications of explosion hazards evaluation. The text is organized into nine chapters. Chapters 1 and 2 discuss the energy release processes which generate accidental explosions, and the resulting development of pressure and shock waves in a surrounding atmosphere. The manner in which the "free-field" waves are modified in interacting with structures or other objects in their paths is discussed in Chapter 3. Structural response to blast loading and non-penetrating impact is covered in two chapters, with Chapter 4 including simplified analysis methods and Chapter 5 including numerical methods. Chapter 6 includes a rather comprehensive treatment of generation of fragments and missiles in explosions, and the flight and effects of impact of these objects. Chapter 7 considers thermal radiation of large chemical explosions. Explosions may or may not cause damage or casualty, and various damage criteria have been developed for structures, vehicles, and people. These criteria are presented in Chapter 8. General procedures for both the postmortem evaluation of accidental explosions and for design for blast and impact resistance are reviewed in Chapter 9. Engineers, scientists, and plant safety personnel will find the book very useful.
Download or read book Gas Dust and Hybrid Explosions written by W.E. Baker and published by Elsevier. This book was released on 2012-12-02 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Damaging accidental explosions are a continuous threat to industry. Categories for such explosions include combustible dust explosions; reactive gas explosions, both confined and unconfined; hybrid explosions involving both gases and dusts; bursts of pressure vessels and piping; and liquid propellant explosions. This book evaluates the physical processes and resulting blast effects for these types of explosions. Special attention is given to reactive gas explosions, both confined and unconfined. This latter class of explosion has occurred all too frequently in refineries and petrochemical complexes, and is also one of the most difficult to predict and evaluate. Much recent work on this topic is reviewed and summarized. This is the only publication of its kind, to date, that offers such a thorough coverage of these types of industrial explosions. [p]Each class of explosion source is reviewed separately, first discussing fundamentals, then presenting methods of analysis and testing, and finally giving curves or equations to predict effects of the particular class of explosion. An extensive bibliography is included together with tables of pertinent properties of explosive materials. The text also includes many figures, equations, tables and a keyword index. The book is intended for researchers in the field of characterizing and mitigating industrial explosions. It will also be of interest to engineers, scientists, and insurers involved in processes.
