Download or read book Experiments and Modeling of the Autoignition of Methyl Pentanoate at Low to Intermediate Temperatures and Elevated Pressures in a Rapid Compression Machine written by and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Autoignition of Methyl Pentanoate at Low to Intermediate Temperatures and Elevated Pressures in a Rapid Compression Machine written by Justin Anthony Bunnell and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Autoignition of Methyl Pentanoate at Low to Intermediate Temperatures and Elevated Pressures in a Rapid Compression Machine written by and published by . This book was released on 2015 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Kinetic Modeling of Hydrocarbon Autoignition at Low and Intermediate Temperatures in a Rapid Compression Machine written by and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A computer model is used to examine oxidation of hydrocarbon fuels in a rapid compression machine. For one of the fuels studied, n-heptane, significant fuel consumption is computed to take place during the compression stroke under some operating conditions, while for the less reactive n-pentane, no appreciable fuel consumption occurs until after the end of compression. The third fuel studied, a 60 PRF mixture of iso-octane and n-heptane, exhibits behavior that is intermediate between that of n-heptane and n-pentane. The model results indicate that computational studies of rapid compression machine ignition must consider fuel reaction during compression in order to achieve satisfactory agreement between computed and experimental results.

Download or read book Autoignition Study of Ethanol and Heptane in a Rapid Compression Machine written by Varun Anthony Davies and published by . This book was released on 2015 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical fuels are a complex mixture of thousands of hydrocarbon compounds, making it challenging and difficult to study their combustion behavior. It's generally agreed that in order to study these complex practical fuels a much simpler approach of studying simple fuel surrogates containing limited number of components is more feasible. Ethanol and n-heptane have been studied as primary reference fuels in the surrogate study of gasoline and diesel over the past few decades. The objective of the following thesis has been to study the autoignition characteristics of ethanol and n-heptane and validate chemical kinetic mechanisms. The validation of a chemical kinetic mechanism provides a deeper insight into the combustion behavior of the fuels which can be further used to study advanced combustion concepts. Experiments have been conducted on the rapid compression machine (RCM) and validated against mechanisms from literature study. Rapid compression machines have been primarily used to study chemical kinetics at low to intermediate temperatures and high pressures for their accuracy and reproducibility. For the following study experiments span over a range of temperature (650-1000 K), pressure (10, 15 and 20 bar) and equivalence ratio ([phi]=0.3, 0.5, 1). Experimental data based on the adiabatic volumetric expansion approach have been modeled numerically using the Sandia SENKIN code in conjunction with CHEMKIN. Experiments have been primarily focused on validating kinetic mechanisms at low to intermediate temperatures and elevated pressures. Ignition delay time data from experiments have been deduced based on the pressure and time histories. A brute sensitivity and flux analysis has been performed to reveal the key sensitive reactions and the dominant reaction pathways followed under the present experimental conditions. Improvements have been suggested and discrepancies noted in order to develop a valid chemical kinetic mechanism. Under the present experimental conditions for the study of ethanol, reactions involving hydroperoxyl radicals, namely C2H5OH+HȮ2 and CH3CHO+ HȮ2 as well as the formation of H2O2 from HȮ2 radical and its subsequent decomposition have been found to be sensitive. Based on the following, improvements and developements have been suggested to increase the accuracy and predictability of the mechanisms studied. Ignition delay data from experiments have been compared against those obtained from the mechanism used in the study for n-heptane. Discrepancies have been found in the low temperature region, with the mechanism under predicting the first ignition delay. The causes for the discrepancy have been noted to be due to the NTC behaviour exhibited during the two stage ignition of n-heptane. At low temperatures the reaction pathway proceeded by chain branching mainly due to the ketohydroperoxide species reaction pathway has been analysed. As the temperature of the reaction increases the reaction pathway is dominated by the ȮOH species propagation resulting in the formation of conjugate olefins and [Beta]-decomposition products, a further investigation of which can help improve the predictability of the mechanism.

Download or read book Laminar Flame Speeds and Autoignition of Dimethyl Ether at Elevated Pressures and Temperature Using Novel Combustion Technique written by Bikash Parajuli and published by . This book was released on 2016 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dimethyl Ether (DME) is a candidate fuel that has potential to be renewable and advantageous over diesel in terms of combustion and emission characteristics as well as suitable for use in stationary gas turbines. Further, it can be used neat as well as blended with diesel, gasoline or other fuels in conventional and advanced CI engines. The design of various types of engines that use DME as a fuel is greatly dependent on computational simulations which require validated chemical kinetic mechanisms that can reliably mimic the combustion and pollutant formation behavior of DME at physical conditions that are relevant to engines. The objective of this work is to contribute to a better understanding and validation of chemical kinetics of DME, particularly at elevated pressures. This is done by obtaining data for auto-ignition and laminar flame speed of DME, which is subsequently used to assess and refine existing chemical kinetic mechanisms.To this effect, a novel optically accessible experimental facility, called DCF (Dynamic Combustion Facility), is first designed, fabricated, characterized and validated for laminar flame propagation studies. In this facility, the combustible mixture in the reactor cylinder is compressed to elevated pressures and temperatures by controlled motion of the reactor piston through a custom-designed hybrid cylinder arrangement. Spark is initiated after compression in the constant volume spherical chamber, yielding an outward propagating flame which is observed by Schlieren imaging technique. The procedures for data interpretation are developed and the experimental conditions under which piston motion induced temperature non-homogeneity is avoided are delineated. The facility is validated by obtaining data for methane/air flame speed at atmospheric and elevated pressures and comparing with the literature data. Subsequently, flame speed data for DME is obtained over a range of pressures and compared with predictions from recent chemical kinetic mechanism. The phenomenon of autoignition in the low-to-intermediate temperature region is of great practical importance in engines. Advanced combustion engines are based on low temperature combustion regime. Operation at these low temperature strategies is significantly kinetically-influenced by the complex low temperature chemistry of fuels. Therefore, autoignition of DME is investigated at low temperatures (630-785 K) and high pressures (8-38 bar) over a range of equivalence ratios (1-6) using a Rapid Compression Machine (RCM). In addition, the effect of CO2 addition on ignition is investigated to gauge the effect of exhaust gas recirculation. Results show that DME is very reactive and there is significant kinetic activity during the compression stroke. Experiments using CO2 show that there is no kinetic effect of CO2 on ignition delay. The experimental data are compared with simulations from available detailed and skeletal chemical kinetic models. In general, there is good overall agreement and discrepancies are noted at low temperatures. The key reactions are identified through flux and sensitivity analysis.The designed facility (DCF) is a novel approach and will be a substantial contribution to the existing arsenal of experimental facilities in combustion. The innovation can extend the range of experimental studies to higher pressures and temperatures, conditions beyond those attainable in existing facilities.

Download or read book Modeling and Experimental Investigation of Methylcyclohexane Ignition in a Rapid Compression Machine written by W. J. Pitz and published by . This book was released on 2005 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new mechanism for the oxidation of methylcyclohexane has been developed. The mechanism combined a newly-developed low temperature mechanism with a previously developed high temperature mechanism. Predictions from the chemical kinetic model have been compared to experimentally measured ignition delay times from a rapid compression machine. Predicted ignition delay times using the initial estimates of the methylcyclohexyl peroxy radical isomerization rate constants were much longer than those measured at low temperatures. The initial estimates of isomerization rate constants were modified based on the experimental findings of Gulati and Walker that indicate a much slower rate of isomerization. Predictions using the modified rate constants for isomerizations yielded faster ignition at lower temperatures that greatly improved the agreement between model predictions and the experimental data. These findings point to much slower isomerization rates for methylcyclohexyl peroxy radicals than previously expected.

Download or read book The Effects of Pressure Temperature and Concentration on the Reactivity of Alkanes Experiments and Modeling in a Rapid Compression Machine written by and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Experiments in a rapid compression machine have examined the influences of variations in pressure, temperature, and equivalence ratio on the autoignition of n-pentane. Equivalence ratios included values from 0.5 to 2.0, compressed gas initial temperatures were varied between 675K and 980K, and compresed gas initial pressures varied from 8 to 20 bar. Numerical simulations of the same experiments were carried out using a detailed chemical kinetic reaction mechanism. The results are interpreted in terms of a low temperature oxidation mechanism involving addition of molecular oxygen to alkyl and hydroperoxyalkyl radicals. Idealized calculations are reported which identify the major reaction paths at each temperature. Results indicate that in most cases, the reactive gases experience a two-stage autoigni tion. The first stage follows a low temperature alkylperoxy radical isomerization pathway that is effectively quenched when the temperature reaches a level where dissociation reactions of alkylperoxy and hydroperoxyalkylperoxy radicals are more rapid than the reverse addition steps. The second stage is controlled by the onset of dissociation of hydrogen peroxide. Results also show that in some cases, the first stage ignition takes place during the compression stroke in the rapid compression machine, making the interpretation of the experiments somewhat more complex than generally assumed. At the highest compression temperatures achieved, little or no first stage ignition is observed.

Download or read book Experiments and Modeling of the Autoignition of Methyl Cyclohexane at High Pressure written by and published by . This book was released on 2013 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gasoline Surrogate Modeling of Gasoline Ignition in a Rapid Compression Machine and Comparison to Experiments written by and published by . This book was released on 2011 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of gasoline in homogeneous charge compression ignition engines (HCCI) and in duel fuel diesel - gasoline engines, has increased the need to understand its compression ignition processes under engine-like conditions. These processes need to be studied under well-controlled conditions in order to quantify low temperature heat release and to provide fundamental validation data for chemical kinetic models. With this in mind, an experimental campaign has been undertaken in a rapid compression machine (RCM) to measure the ignition of gasoline mixtures over a wide range of compression temperatures and for different compression pressures. By measuring the pressure history during ignition, information on the first stage ignition (when observed) and second stage ignition are captured along with information on the phasing of the heat release. Heat release processes during ignition are important because gasoline is known to exhibit low temperature heat release, intermediate temperature heat release and high temperature heat release. In an HCCI engine, the occurrence of low-temperature and intermediate-temperature heat release can be exploited to obtain higher load operation and has become a topic of much interest for engine researchers. Consequently, it is important to understand these processes under well-controlled conditions. A four-component gasoline surrogate model (including n-heptane, iso-octane, toluene, and 2-pentene) has been developed to simulate real gasolines. An appropriate surrogate mixture of the four components has been developed to simulate the specific gasoline used in the RCM experiments. This chemical kinetic surrogate model was then used to simulate the RCM experimental results for real gasoline. The experimental and modeling results covered ultra-lean to stoichiometric mixtures, compressed temperatures of 640-950 K, and compression pressures of 20 and 40 bar. The agreement between the experiments and model is encouraging in terms of first-stage (when observed) and second-stage ignition delay times and of heat release rate. The experimental and computational results are used to gain insight into low and intermediate temperature processes during gasoline ignition.

Download or read book An Experimental Investigation of Structural Effects on the Auto Ignition Properties of Two C5 Esters written by and published by . This book was released on 2008 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ignition studies of two C5 esters were performed using a rapid compression facility. Methyl butanoate and ethyl propanoate were chosen to have matching molecular weights and C:H:O ratios while varying the length of the constituent alkyl chains. The effect of functional group size on ignition delay time was investigated using pressure time-histories and high-speed digital imaging. Low-temperature, moderate-pressure conditions were selected for study due to the relevance to low temperature combustion strategies and internal combustion engine conditions. The experiments covered a range of conditions: T=935-1117 K, P=4.7-19.6 atm, and [phi]=0.3-0.4. The experimental data are compared to previous high temperature studies and chemical modeling. A new mechanism for methyl butanoate and ethyl propanoate ignition is presented. The modeling and experimental data are in excellent agreement for methyl butanaote and yield good agreement for ethyl propanoate.

Download or read book A Study of Autoignition in a Premixed Charge Internal Combustion Engine Using Comprehensive Chemical Kinetics written by Philip Michael Dimpelfeld and published by . This book was released on 1985 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Autoignition Measurements and Modeling in a Rapid Compression Machine written by Daeyup Lee and published by . This book was released on 1997 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ignition of Isomers of Pentane An Experimental and Kinetic Modeling Study written by and published by . This book was released on 2000 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experiments in a rapid compression machine were used to examine the influences of variations in fuel molecular structure on the autoignition of isomers of pentane. Autoignition of stoichiometric mixtures of the three isomers of pentane were studied at compressed gas initial temperatures between 640 K and 900 K and at precompression pressures of 300 and 400 torr. Numerical simulations of the same experiments were carried out using a detailed chemical kinetic reaction mechanism. The results are interpreted in terms of a low-temperature oxidation mechanism involving addition of molecular oxygen to alkyl and hydroperoxyalkyl radicals. Results indicate that in most cases, the reactive gases experience a two-stage autoignition. The first stage follows a low-temperature alkylperoxy radical isomerization pathway that is effectively quenched when the temperature reaches a level where dissociation reactions of alkylperoxy and hydroperoxyalkylperoxy radicals are more rapid than the reverse addition steps. The second stage is controlled by the onset of dissociation of hydrogen peroxide. At the highest compression temperatures achieved, little or no first-stage ignition is observed. Particular attention is given to the influence of heat transfer and the importance of regions of variable temperature within the compressed gas volume. Implications of this work on practical ignition problems are discussed.

Download or read book Autoignition Measurements and Modeling in a Rapid Compression Machine written by and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: By Daeyup Lee.

Download or read book The Ignition of Fuels by Rapid Compression written by and published by . This book was released on 1950 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Methylcyclohexane Auto ignition Studied at Elevated Pressures written by Jeremy S. Vanderover and published by . This book was released on 2007 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: