Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer Science & Business Media. This book was released on 2010-03-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.

Download or read book Diesel Engine Transient Operation written by Constantine D. Rakopoulos and published by Springer Science & Business Media. This book was released on 2009-03-10 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, the study of internal combustion engines operation has focused on the steady-state performance. However, the daily driving schedule of automotive and truck engines is inherently related to unsteady conditions. In fact, only a very small portion of a vehicle’s operating pattern is true steady-state, e. g. , when cruising on a motorway. Moreover, the most critical conditions encountered by industrial or marine engines are met during transients too. Unfortunately, the transient operation of turbocharged diesel engines has been associated with slow acceleration rate, hence poor driveability, and overshoot in particulate, gaseous and noise emissions. Despite the relatively large number of published papers, this very important subject has been treated in the past scarcely and only segmentally as regards reference books. Merely two chapters, one in the book Turbocharging the Internal Combustion Engine by N. Watson and M. S. Janota (McMillan Press, 1982) and another one written by D. E. Winterbone in the book The Thermodynamics and Gas Dynamics of Internal Combustion Engines, Vol. II edited by J. H. Horlock and D. E. Winterbone (Clarendon Press, 1986) are dedicated to transient operation. Both books, now out of print, were published a long time ago. Then, it seems reasonable to try to expand on these pioneering works, taking into account the recent technological advances and particularly the global concern about environmental pollution, which has intensified the research on transient (diesel) engine operation, typically through the Transient Cycles certification of new vehicles.

Download or read book Experimental Study of Transition of Transient Emmisions in Turbocharged High Speed Direct Injection HSDI Diesel Engines written by Hyungsuk Kang and published by . This book was released on 2007 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 4th International Conference on Industrial Engineering written by Andrey A. Radionov and published by Springer. This book was released on 2018-12-07 with total page 2368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 4th International Conference on Industrial Engineering (ICIE), held in Moscow, Russia in May 2018. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bibliography of Scientific and Industrial Reports written by and published by . This book was released on 1947 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1972 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Racing and High Performance Engines 1998 2003 written by Daniel J Holt and published by SAE International. This book was released on 2003-08-05 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 53 technical papers in this book show the improvements and design techniques that researchers have applied to performance and racing engines. They provide an insight into what the engineers consider to be the top improvements needed to advance engine technology; and cover subjects such as: 1) Direct injection; 2) Valve spring advancements; 3) Turbocharging; 4) Variable valve control; 5) Combustion evaluation; and 5) New racing engines.

Download or read book Flow and Combustion in Reciprocating Engines written by C. Arcoumanis and published by Springer Science & Business Media. This book was released on 2009-06-29 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimization of combustion processes in automotive engines is a key factor in reducing fuel consumption. This book, written by eminent university and industry researchers, investigates and describes flow and combustion processes in diesel and gasoline engines.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1978 with total page 986 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 5th International Conference on Industrial Engineering ICIE 2019 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2019-11-30 with total page 1257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 5th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in March 2019. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.

Download or read book Handbook of Thermal Management Systems written by Fethi Aloui and published by Elsevier. This book was released on 2023-08-24 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermal Management Systems: e-Mobility and Other Energy Applications is a comprehensive reference on the thermal management of key renewable energy sources and other electronic components. With an emphasis on practical applications, the book addresses thermal management systems of batteries, fuel cells, solar panels, electric motors, as well as a range of other electronic devices that are crucial for the development of sustainable transport systems. Chapters provide a basic understanding of the thermodynamics behind the development of a thermal management system, update on Batteries, Fuel Cells, Solar Panels, and Other Electronics, provide a detailed description of components, and discuss fundamentals. Dedicated chapters then systematically examine the heating, cooling, and phase changes of each system, supported by numerical analyses, simulations and experimental data. These chapters include discussion of the latest technologies and methods and practical guidance on their application in real-world system-level projects, as well as case studies from engineering systems that are currently in operation. Finally, next-generation technologies and methods are discussed and considered. - Presents a comprehensive overview of thermal management systems for modern electronic technologies related to energy production, storage and sustainable transportation - Addresses the main bottlenecks in the technology development for future green and sustainable transportation systems - Focuses on the practical aspects and implementation of thermal management systems through industrial case studies, real-world examples, and solutions to key problems

Download or read book Piston Heat Transfer in an Air cooled Engine written by Terry Joseph Dembroski and published by . This book was released on 2002 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 28 (thesis year 1 983) a total of 10,661 theses titles from 26 Canadian and 197 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 28 reports theses submitted in-1983, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Download or read book Theory And Practice Of Control And Systems Proceedings Of The 6th Ieee Mediterranean Conference written by Antonio Tornambe and published by World Scientific. This book was released on 1999-01-04 with total page 863 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers together all the lectures presented at the 6th IEEE Mediterranean Conference. It focuses on the mathematical aspects in the theory and practice of control and systems, including stability and stabilizability, robust control, adaptive control, robotics and manufacturing; these topics are under intense investigation and development in the engineering and mathematics communities. The volume should have immediate appeal for a large group of engineers and mathematicians who are interested in very abstract as well as very concrete aspects of control and system theory.

Download or read book Technical Literature Abstracts written by Society of Automotive Engineers and published by . This book was released on 2000 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Use of Services for Family Planning and Infertility United States 1982 written by Gerry E. Hendershot and published by . This book was released on 1988 with total page 982 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1982 statistics on the use of family planning and infertility services presented in this report are preliminary results from Cycle III of the National Survey of Family Growth (NSFG), conducted by the National Center for Health Statistics. Data were collected through personal interviews with a multistage area probability sample of 7969 women aged 15-44. A detailed series of questions was asked to obtain relatively complete estimates of the extent and type of family planning services received. Statistics on family planning services are limited to women who were able to conceive 3 years before the interview date. Overall, 79% of currently mrried nonsterile women reported using some type of family planning service during the previous 3 years. There were no statistically significant differences between white (79%), black (75%) or Hispanic (77%) wives, or between the 2 income groups. The 1982 survey questions were more comprehensive than those of earlier cycles of the survey. The annual rate of visits for family planning services in 1982 was 1077 visits /1000 women. Teenagers had the highest annual visit rate (1581/1000) of any age group for all sources of family planning services combined. Visit rates declined sharply with age from 1447 at ages 15-24 to 479 at ages 35-44. Similar declines with age also were found in the visit rates for white and black women separately. Nevertheless, the annual visit rate for black women (1334/1000) was significantly higher than that for white women (1033). The highest overall visit rate was for black women 15-19 years of age (1867/1000). Nearly 2/3 of all family planning visits were to private medical sources. Teenagers of all races had higher family planning service visit rates to clinics than to private medical sources, as did black women age 15-24. White women age 20 and older had higher visit rates to private medical services than to clinics. Never married women had higher visit rates to clinics than currently or formerly married women. Data were also collected in 1982 on use of medical services for infertility by women who had difficulty in conceiving or carrying a pregnancy to term. About 1 million ever married women had 1 or more infertility visits in the 12 months before the interview. During the 3 years before interview, about 1.9 million women had infertility visits. For all ever married women, as well as for white and black women separately, infertility services were more likely to be secured from private medical sources than from clinics. The survey design, reliability of the estimates and the terms used are explained in the technical notes.