Download or read book Experimental Investigation of the Problem of Surface Roughness written by H. Schlichting and published by . This book was released on 1937 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the universal laws of turbulent velocity distribution at rough and smooth walls, there is in the present work presented a method that allows surface roughness tests and in particular, measurements on the roughness of ship surfaces to be carried out in a much simpler manner. The types of roughness investigated were in the form of flat, rough plates installed in a square-section rectangular channel, the other three walls always being smooth. Twenty-one plates of various roughness were investigated, the roughness elements being the following: spheres of diameter 0.41 and 0.21, respectively, spherical segments, cones, and "short" and "long" angles.
Download or read book Advanced Materials written by Ivan A. Parinov and published by Springer Nature. This book was released on 2020-06-16 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected peer-reviewed contributions from the 2019 International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2019 (Hanoi, Vietnam, 7–10 November, 2019), divided into four scientific themes: processing techniques, physics, mechanics, and applications of advanced materials. The book describes a broad spectrum of promising nanostructures, crystals, materials and composites with special properties. It presents nanotechnology approaches, modern environmentally friendly techniques and physical-chemical and mechanical studies of the structural-sensitive and physical–mechanical properties of materials. The obtained results are based on new achievements in material sciences and computational approaches, methods and algorithms (in particular, finite-element and finite-difference modeling) applied to the solution of different technological, mechanical and physical problems. The obtained results have a significant interest for theory, modeling and test of advanced materials. Other results are devoted to promising devices demonstrating high accuracy, longevity and new opportunities to work effectively under critical temperatures and high pressures, in aggressive media, etc. These devices demonstrate improved comparative characteristics, caused by developed materials and composites, allowing investigation of physio-mechanical processes and phenomena based on scientific and technological progress.
Download or read book Rapid Manufacturing written by Neil Hopkinson and published by John Wiley & Sons. This book was released on 2006-02-22 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid Manufacturing is a new area of manufacturing developed from a family of technologies known as Rapid Prototyping. These processes have already had the effect of both improving products and reducing their development time; this in turn resulted in the development of the technology of Rapid Tooling, which implemented Rapid Prototyping techniques to improve its own processes. Rapid Manufacturing has developed as the next stage, in which the need for tooling is eliminated. It has been shown that it is economically feasible to use existing commercial Rapid Prototyping systems to manufacture series parts in quantities of up to 20,000 and customised parts in quantities of hundreds of thousands. This form of manufacturing can be incredibly cost-effective and the process is far more flexible than conventional manufacturing. Rapid Manufacturing: An Industrial Revolution for the Digital Age addresses the academic fundamentals of Rapid Manufacturing as well as focussing on case studies and applications across a wide range of industry sectors. As a technology that allows manufacturers to create products without tools, it enables previously impossible geometries to be made. This book is abundant with images depicting the fantastic array of products that are now being commercially manufactured using these technologies. Includes contributions from leading researchers working at the forefront of industry. Features detailed illustrations throughout. Rapid Manufacturing: An Industrial Revolution for the Digital Age is a groundbreaking text that provides excellent coverage of this fast emerging industry. It will interest manufacturing industry practitioners in research and development, product design and materials science, as well as having a theoretical appeal to researchers and post-graduate students in manufacturing engineering, product design, CAD/CAM and CIFM.
Download or read book TAGUCHI METHODS EXPLAINED PRACTICAL STEPS TO ROBUST DESIGN written by and published by . This book was released on 1993 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of Mechanical Engineering Research Day 2022 written by Amrik Singh Phuman Singh and published by UTeM Press. This book was released on 2022-08-31 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access e-proceeding is a compilation of 134 articles presented at the 8th Mechanical Engineering Research Day (MERD'22) - Kampus Teknologi UTeM, Melaka, Malaysia on 13 July 2022.
Download or read book ICSBE 2018 written by Ranjith Dissanayake and published by Springer. This book was released on 2019-08-06 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights current research and development in the area of sustainable built environments, currently one of the most important disciplines in civil engineering. It covers a range of topics, including sustainable construction and infrastructures, waste and wastewater management, enhanced sustainability, renewable and clean energy, sustainable materials and industrial ecology, building automation and virtual reality, and impact of climate change. As such it provides vital insights into responsible urbanization practices, and new tools and technologies in civil engineering that can mitigate the negative effects of the built environment.
Download or read book Elements of Transitional Boundary Layer Flowlements written by Robert Edward Mayle and published by Logos Verlag Berlin GmbH. This book was released on 2018 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Second Enhanced Edition Suitable for advanced-level courses or an independent study in fluid mechanics, this text by an expert in the field provides the basic aspects of laminar-to-turbulent flow transition in boundary layers. Logically organized into three major parts, the book covers pre- and post-transitional flow, transitional flow, and several advanced topics in periodically disturbed transitional flow. Some of the subjects covered within the book include high-frequency unsteady laminar flow, turbulent flow, natural transition, bypass transition, turbulent spot theory, turbulent spot kinematics and production, correlations for the onset and rate of transition, global and conditional averaging, transitional flow models, wakeinduced transition, multimode transition, and separated-flow transition. Containing some 202 figures (all drawn by the author), 28 tables, 12 appendices, a supplement on tensors, and an extensive bibliography, the 415 page book provides a wealth of data and information about the subject.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASME Technical Papers written by and published by . This book was released on 2001 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the ASME Turbo Expo written by and published by . This book was released on 2005 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Collection of Technical Papers AIAA 85 1651 AIAA 85 1700 written by and published by . This book was released on 1985 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Paper written by and published by . This book was released on 2001 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Contact mechanics perspective of tribology written by Irina Goryacheva and published by Frontiers Media SA. This book was released on 2021-06-04 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Special Issue of the Manufacturing Engineering Society 2019 SIMES 2019 written by Eva M. Rubio and published by MDPI. This book was released on 2020-07-03 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book derives from the Special Issue of the Manufacturing Engineering Society 2019 (SIMES-2019) that has been launched as a joint issue of the journals Materials and Applied Sciences. The 29 contributions published in this Special Issue of Materials present cutting-edge advances in the field of manufacturing engineering focusing on additive manufacturing and 3D printing; advances and innovations in manufacturing processes; sustainable and green manufacturing; manufacturing of new materials; metrology and quality in manufacturing; industry 4.0; design, modeling, and simulation in manufacturing engineering; and manufacturing engineering and society. Among them, the topic "Additive Manufacturing and 3D Printing" has attracted a large number of contributions in this journal due to its widespread popularity and potential.
Download or read book Proceedings of Innovative Research and Industrial Dialogue 2016 written by and published by Centre for Advanced Research on Energy. This book was released on 2017-06-07 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Innovative Research and Industrial Dialogue 2016 (IRID’16) organized by Advanced Manufacturing Centre (AMC) of the Faculty of Manufacturing Engineering of UTeM which is held in Main Campus, Universiti Teknikal Malaysia Melaka on 20 December 2016. The open access e-proceeding contains a compilation of 96 selected manuscripts from this Research event.
Download or read book Advanced Modeling and Optimization of Manufacturing Processes written by R. Venkata Rao and published by Springer Science & Business Media. This book was released on 2010-12-01 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Modeling and Optimization of Manufacturing Processes presents a comprehensive review of the latest international research and development trends in the modeling and optimization of manufacturing processes, with a focus on machining. It uses examples of various manufacturing processes to demonstrate advanced modeling and optimization techniques. Both basic and advanced concepts are presented for various manufacturing processes, mathematical models, traditional and non-traditional optimization techniques, and real case studies. The results of the application of the proposed methods are also covered and the book highlights the most useful modeling and optimization strategies for achieving best process performance. In addition to covering the advanced modeling, optimization and environmental aspects of machining processes, Advanced Modeling and Optimization of Manufacturing Processes also covers the latest technological advances, including rapid prototyping and tooling, micromachining, and nano-finishing. Advanced Modeling and Optimization of Manufacturing Processes is written for designers and manufacturing engineers who are responsible for the technical aspects of product realization, as it presents new models and optimization techniques to make their work easier, more efficient, and more effective. It is also a useful text for practitioners, researchers, and advanced students in mechanical, industrial, and manufacturing engineering.
Download or read book Report on the High Speed Ground Transportation Act of 1965 written by and published by . This book was released on 1971 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt:
