Download or read book Gas Turbine Emissions written by Timothy C. Lieuwen and published by Cambridge University Press. This book was released on 2013-07-08 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of clean, sustainable energy systems is a preeminent issue in our time. Gas turbines will continue to be important combustion-based energy conversion devices for many decades to come, used for aircraft propulsion, ground-based power generation, and mechanical-drive applications. This book compiles the key scientific and technological knowledge associated with gas turbine emissions into a single authoritative source.

Download or read book Lean Combustion written by Derek Dunn-Rankin and published by Academic Press. This book was released on 2016-07-01 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lean Combustion: Technology and Control, Second Edition outlines and explains the latest advances in lean combustion technology and systems. Combustion under sufficiently fuel-lean conditions can have the desirable attributes of high efficiency and low emissions. The book offers readers both the fundamentals and latest developments in how lean burn (broadly defined) can increase fuel economy and decrease emissions, while still achieving desired power output and performance. This volume brings together research and design of lean combustion systems across the technology spectrum in order to explore the state-of-the-art in lean combustion. Readers will learn about advances in the understanding of ultra-lean fuel mixtures and how new types of burners and approaches to managing heat flow can reduce problems often found with lean combustion (such as slow, difficult ignition and frequent flame extinction). This book offers abundant references and examples of real-world applications. New to this edition are significantly revised chapters on IC engines and stability/oscillations, and new case studies and examples. Written by a team of experts, this contributed reference book aims to teach its reader to maximize efficiency and minimize both economic and environmental costs. - Presents a comprehensive collection of lean burn technology across potential applications, allowing readers to compare and contrast similarities and differences - Provides an extensive update on IC engines including compression ignition (diesel), spark ignition, and homogeneous charge compression ignition (HCCI) - Includes an extensive revision to the Stability/Oscillations chapter - Includes use of alternative fuels such as biogas and hydrogen for relevant technologies - Covers new developments in lean combustion using high levels of pre-heat and heat recirculating burners, as well as the active control of lean combustion instabilities

Download or read book Combustion Instabilities in Gas Turbine Engines written by Timothy C. Lieuwen and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 2005 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers gas turbine users and manufacturers a valuable resource to help them sort through issues associated with combustion instabilities. In the last ten years, substantial efforts have been made in the industrial, governmental, and academic communities to understand the unique issues associated with combustion instabilities in low-emission gas turbines. The objective of this book is to compile these results into a series of chapters that address the various facets of the problem. The Case Studies section speaks to specific manufacturer and user experiences with combustion instabilities in the development stage and in fielded turbine engines. The book then goes on to examine The Fundamental Mechanisms, The Combustor Modeling, and Control Approaches.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1984 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hearings Reports and Prints of the Senate Select Committee on Small Business written by United States. Congress. Senate. Select Committee on Small Business and published by . This book was released on 1975 with total page 1442 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book AIAA Journal written by American Institute of Aeronautics and Astronautics and published by . This book was released on 1997 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Highway Safety Literature written by and published by . This book was released on 1975 with total page 1366 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technology and Management Assistance Programs of the Small Business Administration written by United States. Congress. Senate. Select Committee on Small Business and published by . This book was released on 1976 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Solid Rocket Propulsion Technology written by A. Davenas and published by Newnes. This book was released on 2012-12-02 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, a translation of the French title Technologie des Propergols Solides, offers otherwise unavailable information on the subject of solid propellants and their use in rocket propulsion. The fundamentals of rocket propulsion are developed in chapter one and detailed descriptions of concepts are covered in the following chapters. Specific design methods and the theoretical physics underlying them are presented, and finally the industrial production of the propellant itself is explained. The material used in the book has been collected from different countries, as the development of this field has occurred separately due to the classified nature of the subject. Thus the reader not only has an overall picture of solid rocket propulsion technology but a comprehensive view of its different developmental permutations worldwide.

Download or read book Gas Turbine Combustion written by Arthur H. Lefebvre and published by CRC Press. This book was released on 2010-04-26 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the developments in gas turbine combustion technology that have occurred in the last decade, Gas Turbine Combustion: Alternative Fuels and Emissions, Third Edition provides an up-to-date design manual and research reference on the design, manufacture, and operation of gas turbine combustors in applications ranging from aeronautical to po

Download or read book Unsteady Combustor Physics written by Tim C. Lieuwen and published by Cambridge University Press. This book was released on 2012-08-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developing clean, sustainable energy systems is a pre-eminent issue of our time. Most projections indicate that combustion-based energy conversion systems will continue to be the predominant approach for the majority of our energy usage. Unsteady combustor issues present the key challenge associated with the development of clean, high-efficiency combustion systems such as those used for power generation, heating or propulsion applications. This comprehensive study is unique, treating the subject in a systematic manner. Although this book focuses on unsteady combusting flows, it places particular emphasis on the system dynamics that occur at the intersection of the combustion, fluid mechanics and acoustic disciplines. Individuals with a background in fluid mechanics and combustion will find this book to be an incomparable study that synthesises these fields into a coherent understanding of the intrinsically unsteady processes in combustors.

Download or read book Journal of Engineering for Gas Turbines and Power written by and published by . This book was released on 1998 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Detonation Phenomenon written by John H. S. Lee and published by Cambridge University Press. This book was released on 2008-06-30 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the detonation phenomenon in explosives. It is ideal for engineers and graduate students with a background in thermodynamics and fluid mechanics. The material is mostly qualitative, aiming to illustrate the physical aspects of the phenomenon. Classical idealized theories of detonation waves are presented first. These permit detonation speed, gas properties ahead and behind the detonation wave, and the distribution of fluid properties within the detonation wave itself to be determined. Subsequent chapters describe in detail the real unstable structure of a detonation wave. One-, two-, and three-dimensional computer simulations are presented along with experimental results using various experimental techniques. The important effects of confinement and boundary conditions and their influence on the propagation of a detonation are also discussed. The final chapters cover the various ways detonation waves can be formed and provide a review of the outstanding problems and future directions in detonation research.

Download or read book Natural Gas Engines written by Kalyan Kumar Srinivasan and published by Springer. This book was released on 2018-11-03 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the various advanced reciprocating combustion engine technologies that utilize natural gas and alternative fuels for transportation and power generation applications. It is divided into three major sections consisting of both fundamental and applied technologies to identify (but not limited to) clean, high-efficiency opportunities with natural gas fueling that have been developed through experimental protocols, numerical and high-performance computational simulations, and zero-dimensional, multizone combustion simulations. Particular emphasis is placed on statutes to monitor fine particulate emissions from tailpipe of engines operating on natural gas and alternative fuels.

Download or read book Technical Literature Abstracts written by Society of Automotive Engineers and published by . This book was released on 2000 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modern Gas Turbine Systems written by Peter Jansohn and published by Elsevier. This book was released on 2013-08-31 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern gas turbine power plants represent one of the most efficient and economic conventional power generation technologies suitable for large-scale and smaller scale applications. Alongside this, gas turbine systems operate with low emissions and are more flexible in their operational characteristics than other large-scale generation units such as steam cycle plants. Gas turbines are unrivalled in their superior power density (power-to-weight) and are thus the prime choice for industrial applications where size and weight matter the most. Developments in the field look to improve on this performance, aiming at higher efficiency generation, lower emission systems and more fuel-flexible operation to utilise lower-grade gases, liquid fuels, and gasified solid fuels/biomass. Modern gas turbine systems provides a comprehensive review of gas turbine science and engineering.The first part of the book provides an overview of gas turbine types, applications and cycles. Part two moves on to explore major components of modern gas turbine systems including compressors, combustors and turbogenerators. Finally, the operation and maintenance of modern gas turbine systems is discussed in part three. The section includes chapters on performance issues and modelling, the maintenance and repair of components and fuel flexibility.Modern gas turbine systems is a technical resource for power plant operators, industrial engineers working with gas turbine power plants and researchers, scientists and students interested in the field. - Provides a comprehensive review of gas turbine systems and fundamentals of a cycle - Examines the major components of modern systems, including compressors, combustors and turbines - Discusses the operation and maintenance of component parts