Download or read book Experimental evaluation of stress concentration and intensity factors written by George C. Sih and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experiments on fracture of materials are made for various purposes. Of primary importance are those through which criteria predicting material failure by deformation and/or fracture are investigated. Since the demands of engineering application always precede the development of theories, there is another kind of experiment where conditions under which a particular material can fail are simulated as closely as possible to the operational situation but in a simplified and standardized form. In this way, many of the parameters corresponding to fracture such as toughness, Charpy values, crack opening distance (COD), etc. are measured. Obviously, a sound knowledge of the physical theories governing material failure is necessary as the quantity of interest can seldom be evaluated in a direct manner. Critical stress intensity factors and critical energy release rates are examples. Standard test of materials should be distinguished from basic experi ments. They are performed to provide routine information on materials responding to certain conditions of loading or environment. The tension test with or without a crack is among one of the most widely used tests. Because they affect the results, with size and shape of the specimen, the rate of loading, temperature and crack configuration are standardized to enable comparison and reproducibility of results. The American Society for Testing Materials (ASTM) provides a great deal of information on recommended procedures and methods of testing. The objective is to standardize specifications for materials and definition of technical terms.
Download or read book Experimental Evaluation of stress concentration and intensity factors written by and published by . This book was released on 1981 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Evaluations of Stress Concentration and Intensity Factor written by George C. Sih and published by . This book was released on 1981 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Evaluation of Stress Concentration and Stress Intensity Factors written by William D. Kuehler and published by . This book was released on with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Society for Experimental Stress Analysis written by Society for Experimental Stress Analysis and published by . This book was released on 1977 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vol. 1, no. 1 contains Proceedings of the 17th (or the last) Eastern Photoelasticity Conference.
Download or read book Defects Fracture and Fatigue written by G. Sih and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second International Symposium on Defects, Fracture and Fatigue took place at Mont Gabriel, Quebec, Canada, May 30 to June 5, 1982, and was organized by the Mechanical Engineering Department of McGill University and Institute of Fracture and Solid Mechanics, Lehigh University. The Co-Chairmen of the Sympo sium were Professor G.C. Sih of Lehigh University and Professor J.W. Provan of McGill University. Among those who served on the Organizing Committee were G.C. Sih (Co-Chairman), J.W. Provan (Co-Chairman), H. Mughrabi, H. Zorski, R. Bullough, M. Matczynski, G. Barenblatt and G. Caglioti. As a result of the interest expressed at the First Symposium that was held in October 1980, in Po land, the need for a follow-up meeting to further explore the phenomena of mate rial damage became apparent. Among the areas considered were dislocations, per sistent-slip-bands, void creation, microcracking, microstructure effects, micro/ macro fracture mechanics, ductile fracture criteria, fatigue crack initiation and propagation, stress and failure analysis, deterministic and statistical crack models, and fracture control. This wide spectrum of topics attracted researchers and engineers in solid state physics, continuum mechanics, applied mathematics, metallurgy and fracture mechanics from many different countries. This spectrum is also indicative of the interdisciplinary character of material damage that must be addressed at the atomic, microscopic and macroscopic scale level.
Download or read book Advanced Mechanics of Solids written by Lester W. Schmerr and published by Cambridge University Press. This book was released on 2021-02-18 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build on elementary mechanics of materials texts with this treatment of the analysis of stresses and strains in elastic bodies.
Download or read book Advanced Mechanics of Solids written by Lester W. Schmerr Jr. and published by Cambridge University Press. This book was released on 2021-02-18 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build on the foundations of elementary mechanics of materials texts with this modern textbook that covers the analysis of stresses and strains in elastic bodies. Discover how all analyses of stress and strain are based on the four pillars of equilibrium, compatibility, stress-strain relations, and boundary conditions. These four principles are discussed and provide a bridge between elementary analyses and more detailed treatments with the theory of elasticity. Using MATLAB® extensively throughout, the author considers three-dimensional stress, strain and stress-strain relations in detail with matrix-vector relations. Based on classroom-proven material, this valuable resource provides a unified approach useful for advanced undergraduate students and graduate students, practicing engineers, and researchers.
Download or read book Elements of Structural Optimization written by Raphael T. Haftka and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of structural optimization is still a relatively new field undergoing rapid changes in methods and focus. Until recently there was a severe imbalance between the enormous amount of literature on the subject, and the paucity of applications to practical design problems. This imbalance is being gradually redressed now. There is still no shortage of new publications, but there are also exciting applications of the methods of structural optimizations in the automotive, aerospace, civil engineering, machine design and other engineering fields. As a result of the growing pace of applications, research into structural optimization methods is increasingly driven by real-life problems. Most engineers who design structures employ complex general-purpose software packages for structural analysis. Often they do not have any access to the source the details of program, and even more frequently they have only scant knowledge of the structural analysis algorithms used in this software packages. Therefore the major challenge faced by researchers in structural optimization is to develop methods that are suitable for use with such software packages. Another major challenge is the high computational cost associated with the analysis of many complex real-life problems. In many cases the engineer who has the task of designing a structure cannot afford to analyze it more than a handful of times.
Download or read book Finite Element Analysis of Composite Laminates written by O.O. Ochoa and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are increasingly used in aerospace, underwater, and automotive structures. To take advantage of the full potential of composite materials, structural analysts and designers must have accurate mathematical models and design methods at their disposal. The objective of this monograph is to present the laminated plate theories and their finite element models to study the deformation, strength and failure of composite structures. Emphasis is placed on engineering aspects, such as the analytical descriptions, effective analysis tools, modeling of physical features, and evaluation of approaches used to formulate and predict the response of composite structures. The first chapter presents an overview of the text. Chapter 2 is devoted to the introduction of the definitions and terminology used in composite materials and structures. Anisotropic constitutive relations and Iaminate plate theories are also reviewed. Finite element models of laminated composite plates are presented in Chapter 3. Numerical evaluation of element coefficient matrices, post-computation of strains and stresses, and sample examples of laminated plates in bending and vibration are discussed. Chapter 4 introduces damage and failure criteria in composite laminates. Finally, Chapter 5 is dedicated to case studies involving various aspects and types of composite structures. Joints, cutouts, woven composites, environmental effects, postbuckling response and failure of composite laminates are discussed by considering specific examples.
Download or read book Flow Visualization and Image Analysis written by F.T. Nieuwstadt and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in fluid mechanics depends heavily on the availability of good experimental data which can inspire new ideas and concepts but which are also necessary to check and validate theories and numerical calculations. With the advent of new recording and image analysis techniques new and promising experimental methods in fluid flows have presented themselves which are rather newly developed techniques such as particle tracking velocimetry (PTV), particle image velocimetry (PIV) and laser fluorescene (LIF). This volume presents state-of-the-art research on these techniques and their application to fluid flow. Selected papers from the EUROMECH conference on Image Analysis are published in this volume.
Download or read book Functional Analysis written by Leonid P. Lebedev and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book started its life as a series of lectures given by the second author from the 1970's onwards to students in their third and fourth years in the Department of Mathematics at the Rostov State University. For these lectures there was also an audience of engineers and applied mechanicists who wished to understand the functional analysis used in contemporary research in their fields. These people were not so much interested in functional analysis itself as in its applications; they did not want to be told about functional analysis in its most abstract form, but wanted a guided tour through those parts of the analysis needed for their applications. The lecture notes evolved over the years as the first author started to make more formal typewritten versions incorporating new material. About 1990 the first author prepared an English version and submitted it to Kluwer Academic Publishers for inclusion in the series Solid Mechanics and its Applications. At that stage the notes were divided into three long chapters covering linear and nonlinear analysis. As Series Editor, the third author started to edit them.
Download or read book Stress Concentration at Notches written by Mykhaylo P. Savruk and published by Springer. This book was released on 2016-09-27 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles solutions of linear theory of elasticity problems for isotropic and anisotropic bodies with sharp and rounded notches. It contains an overview of established and recent achievements, and presents the authors’ original solutions in the field considered with extensive discussion. The volume demonstrates through numerous, useful examples the effectiveness of singular integral equations for obtaining exact solutions of boundary problems of the theory of elasticity for bodies with cracks and notches. Incorporating analytical and numerical solutions of the problems of stress concentrations in solid bodies with crack-like defects, this volume is ideal for scientists and PhD students dealing with the problems of theory of elasticity and fracture mechanics.
Download or read book Hydrocyclones written by L. Svarovsky and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is with great pleasure and satisfaction that we introduce this volume which comprises the papers accepted for the 4th International Conference on Hydrocyclones held in Southampton from 23rd to 25th September 1992. As the name implies, this is the fourth Conference in the series, with the previous ones held in Cambridge in 1980, Bath in 1984 and Oxford in 1987. The papers cover a wide span of activities, from fundamental research to advances in industrial practice and, as in the earlier volumes, make a significant contribution of lasting value to the technical literature on hydrocyclones. Hydrocyclones continue to widen their appeal to engineers; besides their traditional role in mineral processing they now attract a lot of attention in chemical engineering, the oil and gas industry, power generation, the food industry, textiles, metal working, waste water treatment, pharmaceuticals, biotechnology and other industries. The reason for this continuously increasing attention is, as David Parkinson (General Manager of Conoco (UK)) said recently, that" ... a hydrocyclone is an engineering dream, a machine with no moving parts." Yet as this Volume clearly shows, the hydrocyclone can do so many things and do them well, whether the application is in solid-liquid, liquid-liquid or liquid-gas separation.
Download or read book Foundations of Solid Mechanics written by P. Karasudhi and published by Taylor & Francis. This book was released on 1991 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written with two purposes, as a textbook for engineering courses and as a reference book for engineers and scientists. The book is an outcome of several lecture courses. These include lectures given to graduate students at the Asian Institute of Technology for several years, a course on elasticity for University of Tokyo graduate students in the spring of 1979, and courses on elasticity, viscoelasticity and ftnite deformation at the National University of Singapore from May to November 1985. In preparing this book, I kept three objectives in mind: ftrst, to provide sound fundamental knowledge of solid mechanics in the simplest language possible; second, to introduce effective analytical and numerical solution methods; and third, to impress on readers that the subject is beautiful, and is accessible to those with only a standard mathematical background. In order to meet those objectives, the ftrst chapter of the book is a review of mathematical foundations intended for anyone whose background is an elementary knowledge of differential calculus, scalars and vectors, and Newton's laws of motion. Cartesian tensors are introduced carefully. From then on, only Cartesian tensors in the indicial notation, with subscript as indices, are used to derive and represent all theories.
Download or read book Mechanics of Fretting Fatigue written by D.A. Hills and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failures of many mechanical components in service result from fatigue. The cracks which grow may either originate from some pre-existing macroscopic defect, or, if the component is of high integrity but highly stressed, a region of localized stress concentration. In turn, such concentrators may be caused by some minute defect, such as a tiny inclusion, or inadvertent machining damage. Another source of surface damage which may exist between notionally 'bonded' components is associated with minute relative motion along the interface, brought about usually be cyclic tangential loading. Such fretting damage is quite insidious, and may lead to many kinds of problems such as wear, but it is its influence on the promotion of embryo cracks with which we are concerned here. When the presence of fretting is associated with decreased fatigue performance the effect is known as fretting fatigue. Fretting fatigue is a subject drawing equally on materials science and applied mechanics, but it is the intention in this book to concentrate attention entirely on the latter aspects, in a search for the quantification of the influence of fretting on both crack nucleation and propagation. There have been very few previous texts in this area, and the present volume seeks to cover five principal areas; (a) The modelling of contact problems including partial slip under tangentialloading, which produces the surface damage. (b) The modelling of short cracks by rigorous methods which deal effectively with steep stress gradients, kinking and closure. (c) The experimental simulation of fretting fatigue.
Download or read book Elasticity written by J.R. Barber and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of Elasticity can be approached from several points of view, depending on whether the practitioner is principally interested in the mathematicalstructure of the subject or in its use in engineering applications and in the latter case, whether essentially numerical or analytical methods are envisaged as the solution method. My first introduction to the subject was in response to a need for information about a specific problem in Tribology. As a practising engineer with a background only in elementary Strength of Materials, I approached that problem initially using the con cepts of concentrated forces and superposition. Today, with a rather more extensive knowledge of analytical techniques in Elasticity, I still find it helpful to go back to these roots in the elementary theory and think through a problem physically as well as mathematically, whenever some new and unexpected feature presents difficulties in research. This way of thinking will be found to permeate this book. My engineering background will also reveal itself in a tendency to work examples through to final expressions for stresses and displacements, rather than leave the derivation at a point where the remaining manipulations would be routine. With the practical engineering reader in mind, I have endeavoured to keep to a minimum any dependence on previous knowledge of Solid Mechanics, Continuum Mechanics or Mathematics.
