Download or read book Application of Exergy written by Tolga Taner and published by BoD – Books on Demand. This book was released on 2018-06-06 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main scope of this study is to emphasize exergy efficiency in all fields of industry. The chapters collected in the book are contributed by invited researchers with a long-standing experience in different research areas. I hope that the material presented here is understandable to a wide audience, not only energy engineers but also scientists from various disciplines. The book contains seven chapters in three sections: (1) "General Information about Exergy," (2) "Exergy Applications," and (3) "Thermoeconomic Analysis." This book provides detailed and up-to-date evaluations in different areas written by academics with experience in their fields. It is anticipated that this book will make a scientific contribution to exergy workers, researchers, academics, PhD students, and other scientists in both the present and the future.
Download or read book Exergy and Its Application written by Muhammad Aziz and published by BoD – Books on Demand. This book was released on 2019-12-04 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exergy has been defined as the maximum work that is useful, extracted from any process toward its equilibrium. Hence, it has a very strong connection with the second law of thermodynamics. In energy harvesting and management systems, the concept of exergy is very important because it represents the efficiency of the system. Exergy can be used as a tool to measure resource efficiency, as well as whole system sustainability. In addition, it can also be used to analyze and clarify the performance of each process; hence, methods of improvement can be determined.This book is the result of a very careful selection of chapters and contributors in the related field. The book is divided into three main sections according to the approaches and purpose of each proposed chapter. The first section is an introduction to the book. The second section, "Advanced energy conversions", describes several advanced technologies that are considered to have great potential in energy conversion and harvesting, and comprises three chapters focusing on photovoltaic/thermal systems with nanofluid, power-to-gas energy storage systems coupled with a combined cycle employing chemical looping combustion technology, and electromagnetic-based power generation. The third section focuses on the idea of "innovative energy management systems" toward high-quality energy systems. In this section, two different chapters describe the introduction of electric vehicles for demand-side energy management and the utilization of supercapacitors for very responsive energy storage in low-power modules. It is expected that this book will provide and enrich the state of the art in advanced energy systems, including energy conversion and management. All the chapters cover a broad range of disciplines, which are correlated in terms of the efforts toward efficient energy systems. In addition, the correlation between energy and exergy, and their understanding, are believed to be very important to improve energy efficiency and guarantee better energy quality.
Download or read book Exergy Method written by Jan Szargut and published by WIT Press. This book was released on 2005 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: The exergy method makes it possible to detect and quantify the possibilities of improving thermal and chemical processes and systems. The introduction of the concept thermo-ecological cost (cumulative consumption of non-renewable natural exergy resources) generated large application possibilities of exergy in ecology. This book contains a short presentation on the basic principles of exergy analysis and discusses new achievements in the field over the last 15 years. One of the most important issues considered by the distinguished author is the economy of non-renewable natural exergy. Previously discussed only in scientific journals, other important new problems highlighted include: calculation of the chemical exergy of all the stable chemical elements, global natural and anthropogenic exergy losses, practical guidelines for improvement of the thermodynamic imperfection of thermal processes and systems, development of the determination methods of partial exergy losses in thermal systems, evaluation of the natural mineral capital of the Earth, and the application of exergy for the determination of a pro-ecological tax.A basic knowledge of thermodynamics is assumed, and the book is therefore most appropriate for graduate students and engineers working in the field of energy and ecological management.
Download or read book Exergy written by Ibrahim Dincer and published by Newnes. This book was released on 2012-12-31 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exergy, Second Edition deals with exergy and its applications to various energy systems and applications as a potential tool for design, analysis and optimization, and its role in minimizing and/or eliminating environmental impacts and providing sustainable development. In this regard, several key topics ranging from the basics of the thermodynamic concepts to advanced exergy analysis techniques in a wide range of applications are covered as outlined in the contents. - Offers comprehensive coverage of exergy and its applications, along with the most up-to-date information in the area with recent developments - Connects exergy with three essential areas in terms of energy, environment and sustainable development - Provides a number of illustrative examples, practical applications, and case studies - Written in an easy-to-follow style, starting from the basics to advanced systems
Download or read book Exergy Analysis and Thermoeconomics of Buildings written by Jose M Sala-Lizarraga and published by Butterworth-Heinemann. This book was released on 2019-10-01 with total page 1116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantifying exergy losses in the energy supply system of buildings reveals the potential for energy improvement, which cannot be discovered using conventional energy analysis. Thermoeconomics combines economic and thermodynamic analysis by applying the concept of cost (an economic concept) to exergy, as exergy is a thermodynamic property fit for this purpose, in that it combines the quantity of energy with its quality factor. Exergy Analysis and Thermoeconomics of Buildings applies exergy analysis methods and thermoeconomics to the built environment. The mechanisms of heat transfer throughout the envelope of buildings are analyzed from an exergy perspective and then to the building thermal installations, analyzing the different components, such as condensing boilers, absorption refrigerators, microcogeneration plants, etc., including solar installations and finally the thermal facilities as a whole. A detailed analysis of the cost formation process is presented, which has its physical roots firmly planted in the second law of thermodynamics. The basic principles and the rules of cost allocation, in energy units (exergy cost), in monetary units (exergoeconomic cost), and in CO2 emissions (exergoenvironmental cost), based on the so-called Exergy Cost Theory are presented and applied to thermal installations of buildings. Clear and rigorous in its exposition, Exergy Analysis and Thermoeconomics of Buildings discusses exergy analysis and thermoeconomics and the role they could play in the analysis and design of building components, either the envelope or the thermal facilities, as well as the diagnosis of thermal installations. This book moves progressively from introducing the basic concepts to applying them. Exergy Analysis and Thermoeconomics of Buildings provides examples of specific cases throughout this book. These cases include real data, so that the results obtained are useful to interpret the inefficiencies and losses that truly occur in actual installations; hence, the assessment of their effects encourages the manner to improve efficiency. - Applies exergy analysis methods for the installation of building thermal facilities equipment components, including pipes, valves, heat exchangers, boilers and heat pumps - Helps readers determine the operational costs of heating and cooling building systems - Includes exergy analysis methods that are devoted to absorption refrigerators, adsorption cooling systems, basic air conditioning processes, ventilation systems and solar systems, either thermal and PV - Discusses the direct application of exergy analysis concepts, including examples of buildings with typical heating, DHW and air conditioning installations
Download or read book Exergy written by Masanori Shukuya and published by Springer Science & Business Media. This book was released on 2012-11-05 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many people, professionals and non-professionals alike, recognize that it is of critical importance to solve global energy and environmental issues. For this purpose, it is essential to have a scientific understanding of what is meant by the “energy” issue is and the “environmental” issue. The concept of “exergy” is a scientific concept that exactly fits. The concept of ‘energy’ is a scientifically-well established concept, namely ‘to be conserved’. Then the question is what is really consumed. Exergy: Theory and Applications in the Built Environment is dedicated to answer this fundamental question by discussing the theory of “exergy” and by demonstrating its use extensively to describe a variety of systems in particular for built-environmental conditioning. Our immediate environmental space works within the flow of energy and matter in an “exergy-entropy” process, and the built environment can be designed with these energy & environmental issues in mind. Exergy: Theory and Applications in the Built Environment introduces readers who are not familiar with thermodynamics to the concept of exergy with a variety of discussion on the built-environmental space such as heating, cooling, lighting, and others. Readers, including students, researchers, planners, architects and engineers, will obtain a better picture of a sustainable built-environment.
Download or read book Exergy written by Silvio de Oliveira Junior and published by Springer Science & Business Media. This book was released on 2012-11-02 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridging the gap between concepts derived from Second Law of Thermodynamics and their application to Engineering practice, the property exergy and the exergy balance can be a tool for analyzing and improving the performance of energy conversion processes. With the exergy analysis it is possible to evaluate the performance of energy conversion processes not only on a thermodynamics basis but also by including production costs and environmental aspects and impacts of the studied processes. This comprehensive approach of the use of energy has, as one of the most important feature, the identification of sustainable ways of energy resources utilization. Based on the fundamentals of the exergy concept, its calculation, graphical representations and exergy balances evaluation, Exergy: Production Cost And Renewability describes the application of detailed exergy and thermoeconomic analysis to power plants and polygeneration systems, petroleum production and refining plants (including hydrogen production), chemical plants, biofuel production routes, combined production of ethanol and electricity, aircraft systems design, environmental impact mitigation processes and human body behavior. The presented case studies aim at providing students, researchers and engineers with guidelines to the utilization of the exergy and thermoeconomic analysis to model, simulate and optimize real processes and industrial plants.
Download or read book The Exergy Method of Thermal Plant Analysis written by T. J. Kotas and published by Elsevier. This book was released on 2013-10-22 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Exergy Method of Thermal Plant Analysis aims to discuss the history, related concepts, applications, and development of the Exergy Method - analysis technique that uses the Second Law of Thermodynamics as the basis of evaluation of thermodynamic loss. The book, after an introduction to thermodynamics and its related concepts, covers concepts related to exergy, such as physical and chemical exergy, exergy concepts for a control method and a closed-system analysis, the exergy analysis of simple processes, and the thermocentric applications of exergy. A seven-part appendix is also included. Appendices A-D covers miscellaneous information on exergy, and Appendix E features charts of thermodynamic properties. Appendix F is a glossary of terms, and Appendix G contains the list of references. The text is recommended for physicists who would like to know more about the Exergy Method, its underlying principles, and its applications not only in thermal plant analysis but also in certain areas.
Download or read book Exergy Analysis for Energy Conversion Systems written by Efstathios Michaelides and published by Cambridge University Press. This book was released on 2021-04-08 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a straightforward and holistic look at energy conversion and conservation processes using the exergy concept with this thorough text. Explains the fundamental energy conversion processes in numerous diverse systems, ranging from jet engines and nuclear reactors to human bodies. Provides examples for applications to practical energy conversion processes and systems that use our naturally occurring energy resources, such as fossil fuels, solar energy, wind, geothermal, and nuclear fuels. With more than one-hundred diverse cases and solved examples, readers will be able to perform optimizations for a cleaner environment, a sustainable energy future, and affordable energy generation. An essential tool for practicing scientists and engineers who work or do research in the area of energy and exergy, as well as graduate students and faculty in chemical engineering, mechanical engineering and physics.
Download or read book Chemical Energy and Exergy written by Norio Sato and published by Elsevier. This book was released on 2004-03-31 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a beginners introduction to chemical thermodynamics for engineers. In the textbook efforts have been made to visualize as clearly as possible the main concepts of thermodynamic quantities such as enthalpy and entropy, thus making them more perceivable. Furthermore, intricate formulae in thermodynamics have been discussed as functionally unified sets of formulae to understand their meaning rather than to mathematically derive them in detail.In this textbook, the affinity of irreversible processes, defined by the second law of thermodynamics, has been treated as the main subject, rather than the equilibrium of chemical reactions. The concept of affinity is applicable in general not only to the processes of chemical reactions but also to all kinds of irreversible processes.This textbook also includes electrochemical thermodynamics in which, instead of the classical phenomenological approach, molecular science provides an advanced understanding of the reactions of charged particles such as ions and electrons at the electrodes.Recently, engineering thermodynamics has introduced a new thermodynamic potential called exergy, which essentially is related to the concept of the affinity of irreversible processes. This textbook discusses the relation between exergy and affinity and explains the exergy balance diagram and exergy vector diagram applicable to exergy analyses in chemical manufacturing processes. This textbook is written in the hope that the readers understand in a broad way the fundamental concepts of energy and exergy from chemical thermodynamics in practical applications. Finishing this book, the readers may easily step forward further into an advanced text of their specified line.- Visualizes the main concepts of thermodynamics to show the meaning of the quantities and formulae.- Focuses mainly on the affinity of irreversible processes and the related concept of exergy.- Provides an advanced understanding of electrochemical thermodynamics.
Download or read book Photovoltaic Thermal PV T Systems written by Ali H. A. Al-Waeli and published by Springer Nature. This book was released on 2019-10-25 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the most up-to-date information on hybrid solar cell and solar thermal collectors, which are commonly referred to as Photovoltaic/Thermal (PV/T) systems. PV/T systems convert solar radiation into thermal and electrical energy to produce electricity, utilize more of the solar spectrum, and save space by combining the two structures to cover lesser area than two systems separately. Research in this area is growing rapidly and is highlighted within this book. The most current methods and techniques available to aid in overall efficiency, reduce cost and improve modeling and system maintenance are all covered. In-depth chapters present the background and basic principles of the technology along with a detailed review of the most current literature. Moreover, the book details design criteria for PV/T systems including residential, commercial, and industrial applications. Provides an objective and decisive source for the supporters of green and renewable source of energy Discusses and evaluates state-of-the-art PV/T system designs Proposes and recommends potential designs for future research on this topic
Download or read book The Exergy Method of Energy Systems Analysis written by John E. Ahern and published by John Wiley & Sons. This book was released on 1980 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Role of Exergy in Energy and the Environment written by Sandro Nižetić and published by Springer. This book was released on 2018-07-30 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the analysis and applications of energy, exergy, and environmental issues in all sectors of the economy, including industrial processes, transportation, buildings, and services. Energy sources and technologies considered are hydrocarbons, wind and solar energy, fuel cells, as well as thermal and electrical storage. This book provides theoretical insights, along with state-of-the-art case studies and examples and will appeal to the academic community, but also to energy and environmental professionals and decision makers.
Download or read book Exergy Analysis of Heating Refrigerating and Air Conditioning written by Ibrahim Dincer and published by Academic Press. This book was released on 2015-08-08 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improve and optimize efficiency of HVAC and related energy systems from an exergy perspective. From fundamentals to advanced applications, Exergy Analysis of Heating, Air Conditioning, and Refrigeration provides readers with a clear and concise description of exergy analysis and its many uses. Focusing on the application of exergy methods to the primary technologies for heating, refrigerating, and air conditioning, Ibrahim Dincer and Marc A. Rosen demonstrate exactly how exergy can help improve and optimize efficiency, environmental performance, and cost-effectiveness. The book also discusses the analysis tools available, and includes many comprehensive case studies on current and emerging systems and technologies for real-world examples. From introducing exergy and thermodynamic fundamentals to presenting the use of exergy methods for heating, refrigeration, and air conditioning systems, this book equips any researcher or practicing engineer with the tools needed to learn and master the application of exergy analysis to these systems. - Explains the fundamentals of energy/exergy for practitioners/researchers in HVAC&R fields for improving efficiency - Covers environmental assessments and economic evaluations for a well-rounded approach to the subject - Includes comprehensive case studies on both current and emerging systems/technologies - Provides examples from a range of applications – from basic HVAC&R to more diverse processes such as industrial heating/cooling, cogeneration and trigeneration, and thermal storage
Download or read book Power Plants in the Industry written by Tolga Taner and published by BoD – Books on Demand. This book was released on 2019-02-06 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main aim of this study is to present power plants for all fields of industry. The chapters collected in the book are contributions by invited researchers with long-standing experience in different research areas. I hope that the material presented here is understandable to a wide audience, not only energy and mechanical engineering specialists but also scientists from various disciplines. The book contains seven chapters in two sections: (1) "Power Plants
Download or read book Biothermodynamics written by Mustafa Ozilgen and published by CRC Press. This book was released on 2016-11-18 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past several decades there has been increasing research interest in thermodynamics as applied to biological systems. This concerns topics such as muscle work and internal energy such as fat and starch. Applications of the first and second laws of thermodynamics to the human body are important to dieticians and health science experts, and applications of these concepts to the animal body are a major concern of animal scientists. This book covers these key topics, which are typically not covered in classic or traditional thermodynamics texts used in mechanical and chemical engineering.
Download or read book Progress in Exergy Energy and the Environment written by Ibrahim Dincer and published by Springer. This book was released on 2014-06-17 with total page 1055 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thorough and highly relevant volume examines exergy, energy and the environment in the context of energy systems and applications and as a potential tool for design, analysis, optimization. It further considers their role in minimizing and/or eliminating environmental impacts and providing for sustainable development. In this regard, several key topics ranging from the basics of the thermodynamic concepts to advanced exergy analysis techniques in a wide range of applications are covered.
