Download or read book Excimer Lasers and New Trends in Laser Microtechnology written by Simeon M. Metev and published by . This book was released on 1993 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Excimer Laser Technology written by Dirk Basting and published by Springer Science & Business Media. This book was released on 2005-04-21 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive survey on Excimer Lasers investigates the current range of the technology, applications and devices of this commonly used laser source, as well as the future of new technologies, such as F2 laser technology. Additional chapters on optics, devices and laser systems complete this compact handbook. A must read for laser technology students, process application researchers, engineers or anyone interested in excimer laser technology. An effective and understandable introduction to the current and future status of excimer laser technology.
Download or read book Laser Assisted Microtechnology written by Simeon M. Metev and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser-Assisted Microtechnology deals with laser applications to a wide variety of problems in microelectronic design and fabrication. It covers micromachining of thin films, microprocessing of materials, maskless laser micropatterning and laser-assisted synthesis of thin-film systems. The monograph describes fundamental aspects and practical details of the technological processes as well as the optimum conditions for their realization.
Download or read book New Developments in Lasers and Electro optics Research written by William T. Arkin and published by Nova Publishers. This book was released on 2007 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is expected that ongoing advances in optics will revolutionise the 21st century as they began doing in the last quarter of the 20th. Such fields as communications, materials science, computing and medicine are leaping forward based on developments in optics. This new series presents leading edge research on optics and lasers from researchers spanning the globe.
Download or read book Excimer Laser Technology written by Dirk Basting and published by . This book was released on 2001 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Small Scale Structures written by N.F. de Rooij and published by Elsevier. This book was released on 2012-12-02 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of 3 symposia dealing with various aspects of small scale structures. Symposium A deals with the development of new materials, including ceramics, polymers, metals, etc., their microstructuring as well as their potential for application in microsystems. All kinds of microsystems are considered, e.g. mechanical, magnetic, optical, chemical, biochemical and issues related to assembly and packaging were also covered. Symposium B deals with four topics: synthesis and preparation of nanostructured ceramics and composites with well-controlled geometric order and chemical composition; coupling of these structures to transducers for current and future chemical and biochemical devices based upon microoptics, microelectronics, microionics, microelectrodes or molecular cages; planar thin film structures and the control of covalent thin film/transducer couplings, the control of selective, stable and sensitive recognition centers at the surface, at grain boundaries or in the bulk of selected nanostructured materials with extremely narrow particle size distributions; analysis of these structures and sensor functions by means of techniques utilizing photons, electrons, ions, or atomic particle beam probes. Symposium E examines the structure-property relationships in thin films and multilayers, from the point of view of both fundamental studies and practical applications.
Download or read book Excimer Lasers written by C.K. Rhodes and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of excimer laser systems marked a significant turning point in the development of coherent sources. The progress of the last few years has been largely predicated upon the combined knowledge of several disciplines including atomic and molecular physics, optical technology, and pulsed power technology, the latter mainly associated with electron beam devices. The purpose of this volume is to provide a comprehensive view of this marvelously exciting field that will be of value to both active researchers and neophytes alike. Since a clear understanding of both theory and experiment is necessary to achieve this goal, these issues are presented as an integrated whole. The preparation of this work involved the dedicated cooperation of many authors dispersed both geographically and intellectually. Naturally, the editor has the responsibility to integrate and balance a diverse range of opinions to the satisfaction of all, a job not always readily accomplished. We hope that this has been performed to the satisfaction of the reader. The editor wishes to express his gratitude to the many persons whose efforts made this book possible. Most important are the authors whose work constitutes the backbone and substance of this volume and whose normal professional lives are very busy ones, indeed. I can say that they worked diligently and with good humor in the preparation of their contributions.
Download or read book Handbook of Laser Micro and Nano Engineering written by KOJI SUGIOKA. and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a comprehensive review of the entire field of laser micro and nano processing, including not only a detailed introduction to individual laser processing techniques but also the fundamentals of laser-matter interaction and lasers, optics, equipment, diagnostics, as well as monitoring and measurement techniques for laser processing. Consisting of 11 sections, each composed of 4 to 6 chapters written by leading experts in the relevant field. Each main part of the handbook is supervised by its own part editor(s) so that high-quality content as well as completeness are assured. The book provides essential scientific and technical information to researchers and engineers already working in the field as well as students and young scientists planning to work in the area in the future. Lasers found application in materials processing practically since their invention in 1960, and are currently used widely in manufacturing. The main driving force behind this fact is that the lasers can provide unique solutions in material processing with high quality, high efficiency, high flexibility, high resolution, versatility and low environmental load. Macro-processing based on thermal process using infrared lasers such as CO2 lasers has been the mainstream in the early stages, while research and development of micro- and nano-processing are becoming increasingly more active as short wavelength and/or short pulse width lasers have been developed. In particular, recent advances in ultrafast lasers have opened up a new avenue to laser material processing due to the capabilities of ultrahigh precision micro- and nanofabrication of diverse materials. This handbook is the first book covering the basics, the state-of-the-art and important applications of the dynamic and rapidly expanding discipline of laser micro- and nanoengineering. This comprehensive source makes readers familiar with a broad spectrum of approaches to solve all relevant problems in science and technology. This handbook is the ultimate desk reference for all people working in the field.
Download or read book Laser Assisted Microtechnology written by Simeon M. Metev and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser-Assisted Microtechnology introduces the principles and techniques of laser-assisted microtechnology with emphasis on micromachining of thin films, microprocessing of materials, maskless laser micropatterning and laser-assisted synthesis of thin-film systems. The experimental and theoretical physico-chemical basis of every technological process is presented in detail. On the basis of some characteristic examples of applications, the capabilities of the technological methods as well as the optimum conditions for their realization are discussed. In this second edition, besides the actualization of the literature, a new chapter concerning the laser-assisted wet chemical micro etching, has been added. This is a new method for direct 3D-micro structuring of solids, with a number of potential applications.
Download or read book ICALEO 97 written by Rémy Fabbro and published by . This book was released on 1997 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Excimer Lasers written by C. K. Rhodes and published by . This book was released on 2014-01-15 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Micro Nano Manufacturing and 3D Microprinting written by Anming Hu and published by Springer Nature. This book was released on 2020-11-28 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the latest advances in laser techniques for micro-nano-manufacturing and an in-depth analysis of applications, such as 3D printing and nanojoining. Lasers have gained increasing significance as a precise tool for advanced manufacturing. Written by world leading scientists, the first part of the book presents the fundamentals of laser interaction with materials at the micro- and nanoscale, including multiphoton excitation and nonthermal melting, and allows readers to better understand advanced processing. In the second part, the authors focus on various advanced fabrications, such as laser peening, surface nanoengineering, and plasmonic heating. Finally, case studies are devoted to special applications, such as 3D printing, microfluidics devices, energy devices, and plasmonic and photonic waveguides. This book integrates both theoretical and experimental analysis. The combination of tutorial chapters and concentrated case studies will be critically attractive to undergraduate and graduate students, researchers, and engineers in the relevant fields. Readers will grasp the full picture of the application of laser for micro-nanomanufacturing and 3D printing.
Download or read book Excimer Lasers written by L.D. Laude and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the many intense light sources, excimer lasers have a unique set of properties that place them at the forefront of tooling for material processing. Their extreme versatility means that they can be used in many areas of materials science and medicine. But three conditions need to be fulfilled in order that their versatility be truly appreciated and exploited: the characteristics and limitations of the sources must be known; the basic excimer laser processes should become reasonably widely known; and problems in search of a solution should be clearly identified. Excimer Lasers covers all three of these points in an instructive and logical way. Probably for the first time, both instrumental and fundamental aspects of excimer laser interaction with matter are presented side-by-side, with examples drawn from the widest range of materials. The articles gathered here are tutorial in their nature, thus making them suitable for a wide readership, from recent graduates and postgraduate students to those established scientists entering the field, all of whom could not find a better, nor more authoritative work with which to start their reading.
Download or read book Ultrafast Laser Processing written by Koji Sugioka and published by CRC Press. This book was released on 2013-06-24 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few decades, the rapid development of ultrafast lasers, such as femtosecond lasers and picosecond lasers, has opened up new avenues for material processing due to their unique features such as ultrashort pulse width and extremely high peak intensity. These techniques have become a common tool for micro- and nanoprocessing of a variety
Download or read book Laser Physics written by and published by . This book was released on 2002 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Laser Processing of Materials Volume 397 written by Rajiv K. Singh and published by . This book was released on 1996-09-09 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser processing has been used in a wide variety of applications and materials such as semiconductors, superconductors, ceramics, polymers and metals. Lasers provide a controlled source of atomic and electronic excitations involving nonequilibrium phenomena that lend themselves to processing of novel materials and structures. The range of laser-solid interactions involving electronic excitation, melting and evaporation result in the formation of novel phases, selective gas excitations, surface modification and low-temperature thin-film deposition. This book from MRS focuses on the use of lasers in both the fundamental understanding and applied aspects of laser-solid and laser-gas interactions relevant to materials processing. Applications featured include thin-film transistors formed by laser-induced crystallization of amorphous silicon, diamond coatings and micromachining. Topics include: fundamentals of laser-solid interactions; fundamentals of pulsed laser ablation; pulsed laser deposition; novel applications of laser processing; laser-driven formation of nanocrystals; laser annealing; surface modification and etching; and laser-assisted chemical vapor deposition.
Download or read book Fundamentals of Laser Assisted Micro and Nanotechnologies written by Vadim P. Veiko and published by Springer. This book was released on 2016-08-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the state of the art of laser micro- and nanotechnology. The physical fundamentals of different processes and the application are presented. The book deals with different materials like phase change and memory alloys, thin films, polymers etc. New phenomena and mechanisms of laser-matter interaction in nano-domains are explained. This book is helpful for students, postgraduates, engineers and researches working not only in the field of laser microtechnology but also in high-tech industry, like photonics, microelectronics, information technology.
