Download or read book National Union Catalog written by and published by . This book was released on 1982 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes entries for maps and atlases.

Download or read book Electrochemical Water Treatment Methods written by Mika Sillanpää and published by Butterworth-Heinemann. This book was released on 2017-06-19 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemical Methods for Water Treatment: Fundamentals, Methods and Full Scale Applications covers all traditional, emerging and combined methods currently available for the treatment of surface, drinkable water and industrial wastewater. Topics covered include an overview of pollutants and treatment methods, an extended introduction to electrochemical processes in water treatment, electrochemical oxidation (including electrodesinfection, electrochemical reduction, electrocoagulation, electroflotation, and electrodialysis. In addition, emerging and combined methods are presented, as is a discussion on the available equipment necessary to scale up the operation of all methods. Electrochemical technologies have many common issues in terms of design, operation and performance. This book brings together a wealth of information on all different methods in a single source to provide broad insights and enable the connection between challenges and opportunities for different methods. The combination of technical information, design and case studies offered helps researchers better understand the challenges associated with scale up and implementation. - Covers all electrochemical methods for water treatment - Includes methods for the treatment of surface, drinking water and industrial wastewater - Presents discussions on equipment in the context of scaling up the operation

Download or read book Short term Methods for Estimating the Chronic Toxicity of Effluents and Receiving Waters to Freshwater Organisms written by and published by . This book was released on 1994 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Urban Stormwater Management in the United States written by National Research Council and published by National Academies Press. This book was released on 2009-03-17 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid conversion of land to urban and suburban areas has profoundly altered how water flows during and following storm events, putting higher volumes of water and more pollutants into the nation's rivers, lakes, and estuaries. These changes have degraded water quality and habitat in virtually every urban stream system. The Clean Water Act regulatory framework for addressing sewage and industrial wastes is not well suited to the more difficult problem of stormwater discharges. This book calls for an entirely new permitting structure that would put authority and accountability for stormwater discharges at the municipal level. A number of additional actions, such as conserving natural areas, reducing hard surface cover (e.g., roads and parking lots), and retrofitting urban areas with features that hold and treat stormwater, are recommended.

Download or read book CRC Handbook of Metal Etchants written by Perrin Walker and published by CRC Press. This book was released on 1990-12-11 with total page 1434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents cleaning and etching solutions, their applications, and results on inorganic materials. It is a comprehensive collection of etching and cleaning solutions in a single source. Chemical formulas are presented in one of three standard formats - general, electrolytic or ionized gas formats - to insure inclusion of all necessary operational data as shown in references that accompany each numbered formula. The book describes other applications of specific solutions, including their use on other metals or metallic compounds. Physical properties, association of natural and man-made minerals, and materials are shown in relationship to crystal structure, special processing techniques and solid state devices and assemblies fabricated. This publication also presents a number of organic materials which are widely used in handling and general processing...waxes, plastics, and lacquers for example. It is useful to individuals involved in study, development, and processing of metals and metallic compounds. It is invaluable for readers from the college level to industrial R & D and full-scale device fabrication, testing and sales. Scientific disciplines, work areas and individuals with great interest include: chemistry, physics, metallurgy, geology, solid state, ceramic and glass, research libraries, individuals dealing with chemical processing of inorganic materials, societies and schools.

Download or read book Chemical Oxidation Applications for Industrial Wastewaters written by Olcay Tunay and published by IWA Publishing. This book was released on 2010-10-12 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the most recent scientific and technological developments (state-of-the-art) in the field of chemical oxidation processes applicable for the efficient treatment of biologically-difficult-to-degrade, toxic and/or recalcitrant effluents originating from different manufacturing processes. It is a comprehensive review of process and pollution profiles as well as conventional, advanced and emerging treatment processes & technologies developed for the most relevant and pollution (wet processing)-intensive industrial sectors. It addresses chemical/photochemical oxidative treatment processes, case-specific treatability problems of major industrial sectors, emerging (novel) as well as pilot/full-scale applications, process integration, treatment system design & sizing criteria (figure-of-merits), cost evaluation and success stories in the application of chemical oxidative treatment processes. Chemical Oxidation Applications for Industrial Wastewaters is an essential reference for lecturers, researchers, industrial and environmental engineers and practitioners working in the field of environmental science and engineering. Visit the IWA WaterWiki to read and share material related to this title: http://www.iwawaterwiki.org/xwiki/bin/view/Articles/CHEMICALOXIDATIONAPPLICATIONSFORINDUSTRIALWASTEWATERS Authors: Professor Olcay Tünay, Professor Isik Kabdasli, Associate Professor Idil Arslan-Alaton and Assistant Professor Tugba Ölmez-Hanci, Environmental Engineering Department, Istanbul Technical University, Turkey.

Download or read book Copper and Bronze in Art written by David A. Scott and published by Getty Publications. This book was released on 2002 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a review of 190 years of literature on copper and its alloys. It integrates information on pigments, corrosion and minerals, and discusses environmental conditions, conservation methods, ancient and historical technologies.

Download or read book WHO Guidelines on Hand Hygiene in Health Care written by World Health Organization and published by World Health Organization. This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The WHO Guidelines on Hand Hygiene in Health Care provide health-care workers (HCWs), hospital administrators and health authorities with a thorough review of evidence on hand hygiene in health care and specific recommendations to improve practices and reduce transmission of pathogenic microorganisms to patients and HCWs. The present Guidelines are intended to be implemented in any situation in which health care is delivered either to a patient or to a specific group in a population. Therefore, this concept applies to all settings where health care is permanently or occasionally performed, such as home care by birth attendants. Definitions of health-care settings are proposed in Appendix 1. These Guidelines and the associated WHO Multimodal Hand Hygiene Improvement Strategy and an Implementation Toolkit (http://www.who.int/gpsc/en/) are designed to offer health-care facilities in Member States a conceptual framework and practical tools for the application of recommendations in practice at the bedside. While ensuring consistency with the Guidelines recommendations, individual adaptation according to local regulations, settings, needs, and resources is desirable. This extensive review includes in one document sufficient technical information to support training materials and help plan implementation strategies. The document comprises six parts.

Download or read book The Things They Carried written by Tim O'Brien and published by HarperCollins. This book was released on 2009-10-13 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: A classic work of American literature that has not stopped changing minds and lives since it burst onto the literary scene, The Things They Carried is a ground-breaking meditation on war, memory, imagination, and the redemptive power of storytelling. The Things They Carried depicts the men of Alpha Company: Jimmy Cross, Henry Dobbins, Rat Kiley, Mitchell Sanders, Norman Bowker, Kiowa, and the character Tim O’Brien, who has survived his tour in Vietnam to become a father and writer at the age of forty-three. Taught everywhere—from high school classrooms to graduate seminars in creative writing—it has become required reading for any American and continues to challenge readers in their perceptions of fact and fiction, war and peace, courage and fear and longing. The Things They Carried won France's prestigious Prix du Meilleur Livre Etranger and the Chicago Tribune Heartland Prize; it was also a finalist for the Pulitzer Prize and the National Book Critics Circle Award.

Download or read book Electromembrane Processes written by Luigi Gurreri and published by MDPI. This book was released on 2021-09-08 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromembrane processes offer a multitude of applications, allowing for the recovery of water, other products, and energy. This book is a collection of contributions on recent advancements in electromembrane processes attained via experiments and/or models. The first paper is a comprehensive review article on the applications of electrodialysis for wastewater treatment, highlighting current status, technical challenges, and key points for future perspectives. The second paper focuses on ZSM-5 zeolite/PVA mixed matrix CEMs with high monovalent permselectivity for recovering either acid or Li+. The third paper regards direct numerical simulations of electroconvection in an electrodialysis dilute channel with forced flow under potentiodynamic and galvanodynamic regimes. The fourth paper investigates the reasons for the formation and properties of soliton-like charge waves in overlimiting conditions. The fifth paper focuses on the characterization of AEMs functionalized by surface modification via poly(acrylic) acid yielding monovalent permselectivity for reverse electrodialysis. In the sixth paper, CFD simulations of reverse electrodialysis systems are performed. The seventh paper proposes an integrated membrane process, including electrochemical intercalation–deintercalation, for the preparation of Li2CO3 from brine with a high Mg2+/Li+ mass ratio. Finally, the eighth paper is a perspective article devoted to the acid–base flow battery with monopolar and bipolar membranes.

Download or read book The Restoration of Engravings Drawings Books and Other Works on Paper written by Max Schweidler and published by Getty Publications. This book was released on 2006 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ever since its original publication in Germany in 1938, Max Schweidler's Die Instandetzung von Kupferstichen, Zeichnungen, Buchern usw has been recognized as a seminal modern text on the conservation and restoration of works on paper. To address what he saw as a woeful dearth of relevant literature and in order to assist those who have 'set themselves the goal of preserving cultural treasures, ' the noted German restorer composed a thorough technical manual covering a wide range of specific techniques, including detailed instructions on how to execute structural repairs and alterations that, if skilfully done, can be virtually undetectable. By the mid-twentieth century, curators and conservators of graphic arts, discovering a nearly invisible repair in an old master print or drawing, might comment that the object had been 'Schweidlerized.' This volume, based on the authoritative revised German edition of 1949, makes Schweidler's work available in English for the first time, in a meticulously edited and annotated critical edition. The editor's introduction places the work in its historical context and probes the philosophical issues the book raises, while some two hundred annotati

Download or read book Ion Exchange Membrane Separation Processes written by H Strathmann and published by Elsevier. This book was released on 2004-01-29 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, membranes and membrane processes are used as efficient tools for the separation of liquid mixtures or gases in the chemical and biomedical industry, in water desalination and wastewater purification. Despite the fact that various membrane processes, like reverse osmosis, are described in great detail in a number of books, processes involving ion-exchange membranes are only described in a fragmented way in scientific journals and patents; even though large industrial applications, like electrodialysis, have been around for over half a century. Therefore, this book is emphasizing on the most relevant aspects of ion-exchange membranes. This book provides a comprehensive overview of ion-exchange membrane separation processes covering the fundamentals as well as recent developments of the different products and processes and their applications. The audience for this book is heterogeneous, as it includes plant managers and process engineers as well as research scientists and graduate students. The separate chapters are based on different topics. The first chapter describes the relevant Electromembrane processes in a general overview. The second chapter explains thermodynamic and physicochemical fundamentals. The third chapter gives information about ion-exchange membrane preparation techniques, while the fourth and fifth chapter discusses the processes as unit operations giving examples for the design of specific plants. - First work on the principles and applications of electrodialysis and related separation processes - Presently no other comprehensive work that can serve as both reference work and text book is available - Book is suited for teaching students and as source for detailed information

Download or read book Plating written by and published by . This book was released on 1970-07 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Glossary of Prosthodontic Terms written by and published by . This book was released on 1994 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Guide for the Care and Use of Laboratory Animals written by National Research Council and published by National Academies Press. This book was released on 2011-01-27 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: A respected resource for decades, the Guide for the Care and Use of Laboratory Animals has been updated by a committee of experts, taking into consideration input from the scientific and laboratory animal communities and the public at large. The Guide incorporates new scientific information on common laboratory animals, including aquatic species, and includes extensive references. It is organized around major components of animal use: Key concepts of animal care and use. The Guide sets the framework for the humane care and use of laboratory animals. Animal care and use program. The Guide discusses the concept of a broad Program of Animal Care and Use, including roles and responsibilities of the Institutional Official, Attending Veterinarian and the Institutional Animal Care and Use Committee. Animal environment, husbandry, and management. A chapter on this topic is now divided into sections on terrestrial and aquatic animals and provides recommendations for housing and environment, husbandry, behavioral and population management, and more. Veterinary care. The Guide discusses veterinary care and the responsibilities of the Attending Veterinarian. It includes recommendations on animal procurement and transportation, preventive medicine (including animal biosecurity), and clinical care and management. The Guide addresses distress and pain recognition and relief, and issues surrounding euthanasia. Physical plant. The Guide identifies design issues, providing construction guidelines for functional areas; considerations such as drainage, vibration and noise control, and environmental monitoring; and specialized facilities for animal housing and research needs. The Guide for the Care and Use of Laboratory Animals provides a framework for the judgments required in the management of animal facilities. This updated and expanded resource of proven value will be important to scientists and researchers, veterinarians, animal care personnel, facilities managers, institutional administrators, policy makers involved in research issues, and animal welfare advocates.

Download or read book The Darkroom Cookbook written by Steve Anchell and published by CRC Press. This book was released on 2012-09-10 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: The art of darkroom developing and printing will never go out of style. Master darkroom specialist Steve Anchell is back to prove it in this long-awaited third edition of his enormously successful Darkroom Cookbook. Packed with over 200 "recipes," some common and others rare gems, you'll discover something new every time you open this guide, whether you're new to the darkroom or have been making your own prints for years. In addition to the formulas, you'll find tons of useful information on developers, push-processing, where to get darkroom equipment, how to set up your own darkroom, how to work and play in your darkroom safely, and much more. This handy guide will become a constant companion for every darkroom enthusiast creating prints at home or in the studio. In addition to complete updates throughout to reflect changes in the availability of chemicals and equipment, this third edition contains all new information on: *Reversal processing *Enlarged negatives *Pyro formulas *Plus expanded sections on printing, pyro, and toning prints Also included for the first time are special technique contributions as well as stunning black and white imagery by Bruce Barnbaum, Rod Dresser, Jay Dusard, Patrick Gainer, Richard Garrod, Henry Gilpin, Gordon Hutchings, Sandy King, Les McLean, Saïd Nuseibeh, France Scully Osterman, Mark Osterman, Tim Rudman, Ryuijie, John Sexton, and John Wimberly. Be sure to visit www.darkroomcookbook.com to find useful links, an interactive user forum, and more! Steve Anchell is a photographer and author of The Variable Contrast Printing Manual, and co-author of The Film Developing Cookbook. He has been teaching darkroom and photography workshops since 1979. Steve is a member of the Freestyle Advisory Board of Photographic Professionals. "With its unrivalled collection of photographic formulae and easy to understand explanations of photographic processes, The Darkroom Cookbook has long been a favorite with darkroom workers everywhere. Now, with further additions to its formulary, more topics, and contributions by renowned darkroom experts, this new edition promises to be an indispensable Aladdin's Cave resource to darkroom enthusiasts of all levels. -Tim Rudman, photographer and author "The Darkroom Cookbook is an essential compendium of photographic information for anyone interested in high-quality darkroom work. -John Sexton, photographer

Download or read book Guide for All Hazard Emergency Operations Planning written by Kay C. Goss and published by DIANE Publishing. This book was released on 1998-05 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Meant to aid State & local emergency managers in their efforts to develop & maintain a viable all-hazard emergency operations plan. This guide clarifies the preparedness, response, & short-term recovery planning elements that warrant inclusion in emergency operations plans. It offers the best judgment & recommendations on how to deal with the entire planning process -- from forming a planning team to writing the plan. Specific topics of discussion include: preliminary considerations, the planning process, emergency operations plan format, basic plan content, functional annex content, hazard-unique planning, & linking Federal & State operations.