Download or read book Evaluation of the Effects and Consequences of Major Accidents in Industrial Plants written by Joaquim Casal and published by Elsevier. This book was released on 2007-12-08 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Evaluation of the Effects and Consequences of Major Accidents in Industrial Plants analyzes the different major accidents which can occur in process plants and during the transportation of hazardous materials. The main features of fires, explosions and toxic releases are discussed, and a set of mathematical models allowing the prediction of their effects and consequences are explained. With a practical approach, the models are applied to simple illustrative examples, as well as to more complex real cases. The use of these calculations in the frame of Quantitative Risk Analysis is also treated. Evaluation of the effects of major accidents in industrial installations covers the following topics: general introduction, source term, fire accidents, vapour cloud explosions, BLEVEs and vessel explosions, atmospheric dispersion of toxic or flammable clouds, vulnerability, and quantitative risk analysis. This book is a useful tool for engineering professionals, as well as an interesting reference for teaching at graduate and post-graduate levels. - Both the essential aspects and the calculations related to the diverse accidents are discussed - The prediction of effects and consequences is performed with a practical approach - Recent contributions from literature have been included - Subjects of increasing importance have been included: an extense analysis of BLEVEs, for example, or the atmospheric dispersion of pathogenic agents

Download or read book Domino Effects in the Process Industries written by Genserik Reniers and published by Elsevier Inc. Chapters. This book was released on 2013-07-08 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt: Managing domino effects in an industrial area is not an easy task. It requires multidisciplinary knowledge and know-how, an adequate mindset, eye for detail and for the big picture, a short-term as well as a long-term vision, thorough collaboration efforts, a generalistic perspective with specialist knowledge, and so on. Different domains need to be dealt with in relation to domino effects: technological issues, procedural requirements, and human factor topics. This chapter describes for each of these domains how they should be viewed with respect to internal and external domino effects, and provides recommendations on how management may/should tackle risks related to possible domino effects within a chemical industrial park.

Download or read book Nutritional Care of the Patient with Gastrointestinal Disease written by Alan L Buchman and published by CRC Press. This book was released on 2015-08-06 with total page 3428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This evidence-based book serves as a clinical manual as well as a reference guide for the diagnosis and management of common nutritional issues in relation to gastrointestinal disease. Chapters cover nutrition assessment; macro- and micronutrient absorption; malabsorption; food allergies; prebiotics and dietary fiber; probiotics and intestinal microflora; nutrition and GI cancer; nutritional management of reflux; nutrition in IBS and IBD; nutrition in acute and chronic pancreatitis; enteral nutrition; parenteral nutrition; medical and endoscopic therapy of obesity; surgical therapy of obesity; pharmacologic nutrition, and nutritional counseling.

Download or read book Advances in Fire and Process Safety written by N. A. Siddiqui and published by Springer. This book was released on 2018-01-08 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the International Conference on Health, Safety, Fire, Environment, and Allied Sciences (HSFEA 2016). The book highlights the latest developments in the field of science and technology aimed at improving health and safety in the workplace. The volume comprises content from leading scientists, engineers, and policy makers. The papers included in this volume look at identifying the limitations of the existing approaches and open new avenues for future research. The book also looks at the accident and work-health records, specifically in Asian countries, and discusses measures to improve the Asian standards and implementation issues with regards to workplace health and safety. The contents of this volume will be of interest to researchers, practitioners, and policy makers alike.

Download or read book Risk Analysis and Control for Industrial Processes Gas Oil and Chemicals written by Hans J Pasman and published by Butterworth-Heinemann. This book was released on 2015-06-14 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk Analysis and Control for Industrial Processes - Gas, Oil and Chemicals provides an analysis of current approaches for preventing disasters, and gives readers an overview on which methods to adopt. The book covers safety regulations, history and trends, industrial disasters, safety problems, safety tools, and capital and operational costs versus the benefits of safety, all supporting project decision processes. Tools covered include present day array of risk assessment, tools including HAZOP, LOPA and ORA, but also new approaches such as System-Theoretic Process Analysis (STPA), Blended HAZID, applications of Bayesian data analytics, Bayesian networks, and others. The text is supported by valuable examples to help the reader achieve a greater understanding on how to perform safety analysis, identify potential issues, and predict the likelihood they may appear. - Presents new methods on how to identify hazards of low probability/high consequence events - Contains information on how to develop and install safeguards against such events, with guidance on how to quantify risk and its uncertainty, and how to make economic and societal decisions about risk - Demonstrates key concepts through the use of examples and relevant case studies

Download or read book Safety Reliability and Risk Analysis written by Sebastian Martorell and published by CRC Press. This book was released on 2008-09-10 with total page 3512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety, Reliability and Risk Analysis. Theory, Methods and Applications contains the papers presented at the joint ESREL (European Safety and Reliability) and SRA-Europe (Society for Risk Analysis Europe) Conference (Valencia, Spain, 22-25 September 2008). The book covers a wide range of topics, including: Accident and Incident Investigation; Crisi

Download or read book Engineering Risk Management written by Thierry Meyer and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-04-04 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised and updated 3rd edition of Engineering Risk Management presents management principles, risk diagnostics, analysis and treatment methods, followed by examples of practical implementation in chemistry, physics, and nanotechnology. An all-new chapter on dynamic risk assessment makes this a uniquely up-to-date and comprehensive treatise on engineering risk management theory and strategies.

Download or read book Fire Safety and Management Awareness written by Fahmina Zafar and published by BoD – Books on Demand. This book was released on 2020-11-04 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: To ensure a healthy lifestyle, fire safety and protocols are essential. The population boom, economic crunches, and excessive exploitation of nature have enhanced the possibilities of destruction due to an event of a fire. Computational simulations enacting case studies and incorporation of fire safety protocols in daily routines can help in avoiding such mishaps.

Download or read book Methods in Chemical Process Safety written by and published by Academic Press. This book was released on 2020-06-26 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods in Chemical Process Safety, Volume Four focuses on the process of learning from experience, including elements of process safety management, human factors in the chemical process industries, and the regulation of chemical process safety, including current approaches. Users will find this book to be an informative tool and user manual for process safety for a variety of professionals with this new release focusing on Advanced Methods of Risk Assessment and Management, Logic Based Methods for Dynamic Risk Assessment, Bayesian Methods for Dynamic Risk Assessment, Data Driven Methods, Rare Event Risk Assessment, Risk Management and Multi Criteria, and much more. - Helps acquaint the reader/researcher with the fundamentals of process safety - Provides the most recent advancements and contributions on the topic from a practical point-of-view - Presents users with the views/opinions of experts in each topic - Includes a selection of authors who are leading researchers and/or practitioners for each given topic

Download or read book Above Ground Storage Tank Oil Spills written by Mervin Fingas and published by Gulf Professional Publishing. This book was released on 2022-09-17 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supply of oil and gas continues to increase as well as natural events such as hurricanes, while engineers and safety managers are not well trained on storage tank engineering and leak detection, one of the most vulnerable and least studied components of oil and gas storage equipment. Above Ground Storage Tank Oil and Chemical Spills gives engineers and researchers a training guide on tank design, tank failure modes and risk analysis. Bridging between research and application, this reference sends an integrated engineering approach backed by both corporate and academic contributors focused specifically on storage tanks, their spills, case histories, and technical aspects of leakage from storage tanks. Additional topics include regulations, differences between spills from storage tanks and other sources, and supported by extensive data and additional references. Above Ground Storage Tank Oil and Chemical Spills delivers a much-needed knowledge source for today's engineers and managers to keep supply and personnel safe. - Learn from both academic and corporate contributors, bridging between research and practical application - Understand lessons learned with case studies and extensive data - Know the differences between spills from storage tanks and other sources

Download or read book Advances in the Collision and Grounding of Ships and Offshore Structures written by Hervé Le Sourne and published by CRC Press. This book was released on 2023-09-11 with total page 1188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers state-of-the-art developments in the collision and grounding of ship and offshore structures. The topics covered by the contributions include: dynamics of vessels in collision and grounding; collision and grounding in Arctic conditions; collision and grounding statistics and measures of the probability of incidents; risk assessment of collision and grounding; measures for reduction of collision and grounding, machine learning methods for the evaluation of probabilistic collision and grounding risk; new designs for improvement of structural resistance to collisions; analysis of ultimate strength of damaged ship structures; design of buffer bows to reduce collision consequences; innovative navigation systems for safer sea transportation, collision between ships and offshore structures; collision between ships and fixed or floating bridges, collision and grounding experiments; properties of materials under impact loadings; residual strength of damaged ships and offshore structures; hull girder response of ships under severe dynamic loadings. The book is aimed at naval architects, marine engineers and scientists. The ICCGS conferences aim to present state-of-the-art methods for analysis and design against collision and grounding of ships, collisions between ships and icebergs, offshore structures, bridges, submerged tunnels and waterfront structures. Previous conferences were held in: San Francisco, USA in 1996; Copenhagen, Denmark in 2001; Tokyo, Japan in 2004; Hamburg, Germany in 2007; Helsinki, Finland in 2010; Trondheim, Norway in 2013; Ulsan, South Korea in 2016, and Lisbon, Portugal in 2019. The Proceedings in Marine Technology and Ocean Engineering series is devoted to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of ‘Marine Technology and Ocean Engineering’. The Series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) Conferences, the Marine Structures (MARSTRUCT) Conferences, the Renewable Energies Offshore (RENEW) Conferences and the Maritime Technology (MARTECH) Conferences, and the Collision and Grounding of Ships and Offshore Structures (ICCGS) conferences. The ‘Marine Technology and Ocean Engineering’ series is also open to new conferences that cover topics on the sustainable exploration and exploitation of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and its resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.

Download or read book What Went Wrong written by Trevor Kletz and published by Butterworth-Heinemann. This book was released on 2019-06-06 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: What Went Wrong? 6th Edition provides a complete analysis of the design, operational, and management causes of process plant accidents and disasters. Co-author Paul Amyotte has built on Trevor Kletz's legacy by incorporating questions and personal exercises at the end of each major book section. Case histories illustrate what went wrong and why it went wrong, and then guide readers in how to avoid similar tragedies and learn without having to experience the loss incurred by others. Updated throughout and expanded, this sixth edition is the ultimate resource of experienced-based analysis and guidance for safety and loss prevention professionals. - 20% new material and updating of existing content with parts A and B now combined - Exposition of topical concepts including Natech events, process security, warning signs, and domino effects - New case histories and lessons learned drawn from other industries and applications such as laboratories, pilot plants, bioprocess plants, and electronics manufacturing facilities

Download or read book Sustainable Automotive Technologies 2013 written by Jörg Wellnitz and published by Springer Science & Business Media. This book was released on 2013-09-24 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book captures selected peer reviewed papers presented at the 5th International Conference on Sustainable Automotive Technologies, ICSAT 2013, held in Ingolstadt, Germany. ICSAT is the state-of-the-art conference in the field of new technologies for transportation. The book brings together the work of international researchers and practitioners under the following interrelated headings: fuel transportation and storage, material recycling, manufacturing and management costs, engines and emission reduction. The book provides a very good overview of research and development activities focused on new technologies and approaches capable of meeting the challenges to sustainable mobility.

Download or read book Safety and Reliability of Complex Engineered Systems written by Luca Podofillini and published by CRC Press. This book was released on 2015-09-03 with total page 4627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and Reliability of Complex Engineered Systems contains the Proceedings of the 25th European Safety and Reliability Conference, ESREL 2015, held 7-10 September 2015 in Zurich, Switzerland. Including 570 papers on theories and methods in the area of risk, safety and reliability, and their applications to a wide range of industrial, civil and social sectors, this book will be of interest to academics and professionals involved or interested in aspect of risk, safety and reliability in various engineering areas.

Download or read book 2024 the 8th International Conference on Energy and Environmental Science ICEES 2024 written by Yanan Liu and published by Springer Nature. This book was released on with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dynamic Risk Assessment and Management of Domino Effects and Cascading Events in the Process Industry written by Valerio Cozzani and published by Elsevier. This book was released on 2021-06-08 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Risk Assessment and Management of Domino Effects and Cascading Events in the Process Industry provides insights into emerging and state-of-the-art methods for the dynamic assessment of risk and safety barrier performance in the framework of domino effect risk management. The book presents methods and tools to manage the risk of cascading events involving the chemical and process industry. It is an ideal reference for both safety and security managers, industrial risk stakeholders, scientists and practitioners. In addition, laymen may find the state-of-the-art methods concerning domino effects (large-scale accidents) and how to prevent their propagation an interesting topic of study. - Includes dynamic hazard and risk assessment methods - Presents methods for safety barrier performance assessment - Addresses the effect of harsh environment on domino risk assessment - Relates physical security in relation to domino effects - Includes innovative methods and tools

Download or read book Advances in Safety Reliability and Risk Management written by Christophe Berenguer and published by CRC Press. This book was released on 2011-08-31 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a wide range of topics on safety, reliability and risk management, the present publication will be of interest to academics and professionals working in a wide range of scientific, industrial and governmental sectors, including: Aeronautics and Aerospace; Chemical and Process Industry; Civil Engineering; Critical Infrastructures; Energy; Information Technology and Telecommunications; Land Transportation; Manufacturing; Maritime Transportation; Mechanical Engineering; Natural Hazards; Nuclear Industry; Offshore Industry; Policy Making and Public Planning.