Download or read book Evaluation of Soil and Rock Properties written by P. J. Sabatini and published by . This book was released on 2004-10-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents state-of-the-practice information on the evaluation of soil and rock properties for geotechnical design applications. This document addresses the entire range of materials potentially encountered in highway engineering practice, from soft clay to intact rock and variations of materials that fall between these two extremes. Information is presented on parameters measured, evaluation of data quality, and interpretation of properties for conventional soil and rock laboratory testing, as well as in situ devices such as field vane testing, cone penetration testing, dilatometer, pressuremeter, and borehole jack. This document provides the design engineer with information that can be used to develop a rationale for accepting or rejecting data and for resolving inconsistencies between data provided by different laboratories and field tests. This document also includes information on: (1) the use of Geographical Information Systems (GIS) and Personal Data Assistance devices for the collection and interpretation of subsurface information; (2) quantitative measures for evaluating disturbance of laboratory soil samples; and (3) the use of measurements from geophysical testing techniques to obtain information on the modulus of soil. Also included are chapters on evaluating properties of special soil materials (e.g., loess, cemented sands, peats and organic soils, etc.) and the use of statistical information in evaluating anomalous data and obtaining design values for soil and rock properties. An appendix of three detailed soil and rock property selection examples is provided which illustrate the application of the methods described in the document.
Download or read book Evaluation of Soil and Rock Properties written by and published by . This book was released on 2002 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents state-of-the-practice information on the evaluation of soil and rock properties for geotechnical design applications. This document addresses the entire range of materials potentially encountered in highway engineering practice, from soft clay to intact rock and variations of materials that fall between these two extremes. Information is presented on parameters measured, evaluation of data quality, and interpretation of properties for conventional soil and rock laboratory testing, as well as in situ devices such as field vane testing, cone penetration testing, dilatometer, pressuremeter, and borehole jack. This document provides the design engineer with information that can be used to develop a rationale for accepting or rejecting data and for resolving inconsistencies between data provided by different laboratories and field tests. This document also includes information on: (1) the use of Geographic Information Systems (GIS) and Personal Data Assistance devices for the collection and interpretation of subsurface information; (2) quantitative measure for evaluating disturbance of laboratory soil samples; and (3) the use of measurements from geophysical testing techniques to obtain information on the modulus of soil. Also included are chapters on evaluating properties of special soil materials (e.g., loess, cemented sands, peats and organic soils, etc.) and the use of statistical information in evaluating anomalous data and obtaining design values for soil and rock properties. An appendix of three detailed soil and rock property selection examples is provided which illustrate the application of the methods described in the document.
Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.
Download or read book Soil Properties written by Cheng Liu and published by . This book was released on 2000 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanying diskette includes software that allows easy analysis of collected data and information files.
Download or read book Advances in Characterization and Analysis of Expansive Soils and Rocks written by Laureano R. Hoyos and published by Springer. This book was released on 2017-07-11 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes a collection of technical papers covering two important research topics in geotechnical engineering: (1) the behavior and treatment of expansive soils, and (2) the characterization of rock properties. The twelve studies on expansive soils include investigations into novel stabilization techniques for expansive soils using different admixtures or mechanical consolidation techniques, as well as new experimental approaches to evaluate the behavior of expansive soils. They also include an evaluation of wetting boundary conditions on the volume change of expansive soils, as well as the role of hydrologic boundary conditions in arid climates. The four studies on rock properties include thermo-hydro-mechanical behavior of gypsum rock, role of rock strength in blastability, indirect methods to estimate rock strength, and variations in isotope distributions in Permian rocks. The two broad themes in this collection, as summarized above, are representative of local challenges facing geotechnical engineers in the Middle East, but their contributions can also be extended to other regions of the world. This volume is part of the proceedings of the 1st GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2017.
Download or read book Engineering Properties of Soils and Rocks written by F. G. Bell and published by Elsevier. This book was released on 2013-10-22 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Properties of Soils and Rocks, Third Edition serves as a guide to the engineering properties and behavior of soils and rocks. The text also complements other texts on rock and soil mechanics. The book covers topics such as the properties and classification of soils such as tills and other kinds of soils related to cold climates, tropical soils, and organic soils such as peat. The text also includes the engineering behavior and properties, classification and description, discontinuities, and weathering of rocks and rock masses. The monograph is recommended for engineers who would like to know about the properties of soils and rocks and the application of their study in the field of engineering.
Download or read book Nondestructive and Automated Testing for Soil and Rock Properties written by and published by . This book was released on 1911 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soil Properties written by Cheng Liu and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This geotechnical laboratory manual for civil engineering, civil engineering technology, and construction science students and professionals uses a simple, direct style to explain each test procedure. It offers guidelines on collecting and evaluating data, as well as presenting the results properly: Typical values are given for many of the tests to help students decide if their results are reasonable. "Some of the key features include: " Updated to conform to the very latest information from ASTM. Definitions and objectives of tests are fully explained. Step-by-step numerical calculations. Engineering uses of the tests to show how the results are used in practical engineering applications. A unique chapter presents a visual-manual procedure for describing and identifying soils. Coverage of the consolidated undrained (CU) triaxial test. Photographs of various types of soil testing equipment. Software included that allows the user to more easily analyze collected data.
Download or read book Engineering Properties of Rocks written by Lianyang Zhang and published by Butterworth-Heinemann. This book was released on 2016-09-06 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: More often than not, it is difficult or even impossible to obtain directly the specific rock parameters of interest using in situ methods. The procedures for measuring most rock properties are also time consuming and expensive. Engineering Properties of Rocks, Second Edition, explores the use of typical values and/or empirical correlations of similar rocks to determine the specific parameters needed. The book is based on the author's extensive experience and offers a single source of information for the evaluation of rock properties. It systematically describes the classification and characterization of intact rock, rock discontinuities, and rock masses, and presents the various indirect methods for estimating the deformability, strength, and permeability of these components as well as the in situ rock stresses. - Presents a single source for the correlations on rock properties - Saves time and resources invested on in situ testing procedures - Fully updated with current literature - Expanded coverage of rock types and geographical locations
Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.
Download or read book Principles of Testing Soils Rocks and Concrete written by T.S. Nagaraj and published by Elsevier. This book was released on 1993-01-13 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soils, rocks and concrete are the principal materials a civil engineer encounters in practice. This book deals with the material analogies, their implications in property characterization, giving attention to similar as well as dissimilar methods in respect of each of these three materials. It provides an integrated, systematic approach for realistic assessment of engineering properties of soils, rocks and concrete. Geotechnical engineers, civil engineers and materials scientists will be interested in this volume.
Download or read book Novel Issues on Unsaturated Soil Mechanics and Rock Engineering written by Laureano R. Hoyos and published by Springer. This book was released on 2018-10-29 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses issues related to unsaturated soil mechanics and rock engineering based on technical papers focusing on two important topics in geotechnical engineering: (1) the characterization of unsaturated soils, and (2) the investigation of rock properties. The research studies on unsaturated soils include the characterization techniques of the unsaturated soils. The studies on rock properties include thermo-hydro-mechanical behavior of gypsum rock, soft rocks capacity, role of rock strength in blastability, indirect methods to estimate rock strength, and variations in isotope distributions in Permian rocks. The two broad themes in this collection, as summarized above, are representative of local challenges facing geotechnical engineers in the Middle East, but their contributions can also be extended to other regions of the world. The volume is based on the best contributions to the 2nd GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2018 – The official international congress of the Soil-Structure Interaction Group in Egypt (SSIGE).
Download or read book Probabilistic Methods in Geotechnical Engineering written by D. V. Griffiths and published by Springer Science & Business Media. This book was released on 2007-12-14 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn to use probabilistic techniques to solve problems in geotechnical engineering. The book reviews the statistical theories needed to develop the methodologies and interpret the results. Next, the authors explore probabilistic methods of analysis, such as the first order second moment method, the point estimate method, and random set theory. Examples and case histories guide you step by step in applying the techniques to particular problems.
Download or read book Soil Constitutive Models written by Jerry A. Yamamuro and published by Amer Society of Civil Engineers. This book was released on 2005-01 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: GSP 128 contains papers by 19 prominent constitutive modelers presented at the Geo-Frontier Conference, held in Austin, Texas, January 24-26, 2005.
Download or read book Classification Engineering Properties and Field Exploration of Soils Intact Rock and in Situ Rock Masses written by William Joel Hall and published by . This book was released on 1974 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Back Analysis in Rock Engineering written by Shunsuke Sakurai and published by CRC Press. This book was released on 2017-09-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practicing engineers working in the field of design, construction and monitoring of rock structures such as tunnels and slopes with technical information on how to design, how to excavate and how to monitor the structures during their construction. Based on the long-term engineering experiences of the author, field measurements together with back analyses are presented as the most powerful tools in rock engineering practice. One of the purposes of field measurements is to assess the stability of the rock structures during their construction. However, field measurement results are only numbers unless they are quantitatively interpreted, a process in which back analyses play an important role. The author has developed both the concepts of “critical strain” and of the “anisotropic parameter” of rocks, which can make it possible not only to assess the stability of the structures during their construction, but also to verify the validity of design parameters by the back analysis of field measurement results during the constructions. Based on the back analysis results, the design parameters used at a design stage could be modified if necessary. This procedure is called an “Observational method”, a concept that is entirely different from that of other structures such as bridges and buildings. It is noted that in general, technical books written for practicing engineers mainly focus on empirical approaches which are based on engineers’ experiences. In this book, however, no empirical approaches will be described, instead, all the approaches are based on simple rock mechanics theory. This book is the first to describe an observational method in rock engineering practice, which implies that the potential readers of this book must be practicing engineers working on rock engineering projects.
Download or read book Advancements in Geotechnical Engineering written by Hany Shehata and published by Springer Nature. This book was released on 2020-11-19 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book intends directly the practical engineers, who will be of great interest in reading the interesting chapters. Earthwork projects are critical components in civil construction and often require detailed management techniques and unique solution methods to address failures. Being earthbound, earthwork is influenced by geomaterial properties at the onset of a project. Hence, an understanding of the in-situ soil properties and all geotechnical aspects is essential. Analytical methods for earth structures remain critical for researchers due to the mechanical complexity of the system. Striving for better earthwork project management, the geotechnical engineering community continues to find improved testing techniques for determining sensitive properties of soil and rock, including stress wave-based, non-destructive testing methods. To minimize failure during earthwork construction, past case studies and data may reveal useful lessons and information to improve project management and minimize economic losses.
