Download or read book Evaluation of Fiber matrix Adhesion Using the Single Fiber Fragmentation Test written by David Henry Bradford and published by . This book was released on 1997 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of the Effect of a Custom Fiber Surface Treatment on the Adhesion Level in a Polymer Based Composite Using the Single Fiber Fragmentation Test written by D. Bradford and published by . This book was released on 2006 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past several years, a number of investigations have focused on improved fiber surface treatments as well as the development of micromechanical experimental techniques to accurately evaluate the fiber/matrix adhesion level. The aim of this study was to evaluate the effect of a custom fiber surface treatment on the fiber/matrix adhesion level of a carbon fiber reinforced, polymer matrix composite material. Single fiber fragmentation tests were performed on specimens produced using EPON 828 resin and AU-4 fibers, AS-4 fibers, and AU-4 fibers that were treated with a custom fiber surface treatment known to lead to direct chemical reaction with the EPON 828 resin. Qualitative inspection of the birefringent stress patterns produced by the custom treated fiber indicate a high level of fiber/matrix adhesion, greater than the adhesion exhibited by either of the two as received fiber types. In addition, the custom treated fibers produced an average fiber fragment length approximately 23% shorter than the AS-4 specimens, indicating a rather significant increase in adhesion level for the custom treated fibers over the commercially treated fibers. Calculated interfacial shear strength values follow the same trend as was seen during the evaluation of the average fragment length values.
Download or read book Fiber Matrix and Interface Properties written by Christopher J. Spragg and published by ASTM International. This book was released on 1996 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing fiber-matrix adhesion and its characterization in composite materials, reports results from applying the most commonly used test methods, such as fragmentation, pull-out, and indentation, to high-performance composites and their constituents. The 13 papers were presented at a symposium i
Download or read book Interfaces in Composites written by and published by ASTM International. This book was released on 1969 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the American Society for Composites 2014 Twenty ninth Technical Conference on Composite Materials written by Hyonny Kim and published by DEStech Publications, Inc. This book was released on 2014-09-17 with total page 3583 pages. Available in PDF, EPUB and Kindle. Book excerpt: New and not previously published U.S. and international research on composite and nanocomposite materialsFocus on health monitoring/diagnosis, multifunctionality, self-healing, crashworthiness, integrated computational materials engineering (ICME), and moreApplications to aircraft, armor, bridges, ships, and civil structures This fully searchable CD-ROM contains 270 original research papers on all phases of composite materials, presented by specialists from universities, NASA and private corporations such as Boeing. The document is divided into the following sections: Aviation Safety and Aircraft Structures; Armor and Protection; Multifunctional Composites; Effects of Defects; Out of Autoclave Processing; Sustainable Processing; Design and Manufacturing; Stability and Postbuckling; Crashworthiness; Impact and Dynamic Response; Natural, Biobased and Green; Integrated Computational Materials Engineering (ICME); Structural Optimization; Uncertainty Quantification; NDE and SHM Monitoring; Progressive Damage Modeling; Molecular Modeling; Marine Composites; Simulation Tools; Interlaminar Properties; Civil Structures; Textiles. The CD-ROM displays figures and illustrations in articles in full color along with a title screen and main menu screen. Each user can link to all papers from the Table of Contents and Author Index and also link to papers and front matter by using the global bookmarks which allow navigation of the entire CD-ROM from every article. Search features on the CD-ROM can be by full text including all key words, article title, author name, and session title. The CD-ROM has Autorun feature for Windows 2000 or higher products and can also be used with Macintosh computers. The CD includes the program for Adobe Acrobat Reader with Search 11.0. One year of technical support is included with your purchase of this product.
Download or read book Progress in Adhesion and Adhesives Volume 6 written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2021-08-24 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the voluminous research being published, it is difficult, if not impossible, to stay abreast of current developments in a given area. The review articles in this book consolidate information to provide an alternative way to follow the latest research activity and developments in adhesion science and adhesives. With the ever-increasing amount of research being published, it is a Herculean task to be fully conversant with the latest research developments in any field, and the arena of adhesion and adhesives is no exception. Thus, topical review articles provide an alternate and very efficient way to stay abreast of the state-of-the-art in many subjects representing the field of adhesion science and adhesives. The 19 chapters in this Volume 6 follow the same order as the review articles originally published in RAA in the year 2020 and up to June 2021. The subjects of these 19 chapters fall in the following areas: Adhesives and adhesive joints Contact angle Reinforced polymer composites Bioadhesives Icephobic coatings Adhesives based on natural resources Polymer surface modification Superhydrophobic surfaces The topics covered include: hot-melt adhesives; adhesively-bonded spar-wingskin joints; contact angle hysteresis; fiber/matrix adhesion in reinforced thermoplastic composites; bioadhesives in biomedical applications; mucoadhesive pellets for drug delivery applications; bio-inspired icephobic coatings; wood adhesives based on natural resources; adhesion in biocomposites; vacuum UV surface photo-oxidation of polymers and other materials; vitrimers and their relevance to adhesives; superhydrophobic surfaces by microtexturing; structural acrylic adhesives; mechanically durable water-repellent surfaces; mussel-inspired underwater adhesives; and cold atmospheric pressure plasma technology for modifying polymers. Audience This book will be valuable and useful to researchers and technologists in materials science, nanotechnology, physics, surface and colloid chemistry in multiple disciplines in academia, industry, various research institutes and other organizations.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1994 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micromechanics Analysis of the Single Fiber Fragmentation Test to Give a Better Understanding of the Fiber matrix Interface in Composite Materials written by Yung-Ching Liu and published by . This book was released on 1997 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Applications of Natural Fibres written by Jörg Müssig and published by John Wiley & Sons. This book was released on 2010-04-15 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural fibres are becoming increasingly popular for use in industrial applications, providing sustainable solutions to support technical innovation. These versatile, natural based materials have applications in a wide range of industries, from textiles and consumer products to the automotive and construction industries. Industrial Applications of Natural Fibres examines the different steps of processing, from natural generation, fibre separation and fibre processing, to the manufacturing of the final product. Each step is linked to fibre properties and characterization, highlighting how different fibres influence the product properties through a discussion of their chemical and structural qualities. Considering the value-added chain from natural generation to final product, with emphasis on quality management, this book reviews the current research and technical applications of natural fibres. Topics covered include: Introduction to the Chemistry and Biology of Natural Fibres Economic Aspects of Natural Fibres Vegetable Fibres Animal Fibres Testing and Quality Management Applications: Current and Potential Industrial Application of Natural Fibres will be a valuable resource for scientists in industry and academia interested in the development of natural based materials and products. It is particularly relevant for those working in chemical engineering, sustainable chemistry, agricultural sciences, biology and materials sciences.
Download or read book Self Reinforced Polymer Composites written by Padmanabhan Krishnan and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-06-21 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive introduction to all aspects of self-reinforced polymer composites (SRCs) science and technology. After introducing the fundamental characteristics of SRCs, ample space is given to manufacturing, processing, characterization and application techniques. The approach is didactic and focused on formulations, illustrations and applications, which makes the book ideal for students, teachers and practitioners alike.
Download or read book Interface Science and Composites written by Soo-Jin Park and published by Academic Press. This book was released on 2011-07-18 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of Interface Science and Composites is to facilitate the manufacture of technological materials with optimized properties on the basis of a comprehensive understanding of the molecular structure of interfaces and their resulting influence on composite materials processes. From the early development of composites of various natures, the optimization of the interface has been of major importance. While there are many reference books available on composites, few deal specifically with the science and mechanics of the interface of materials and composites. Further, many recent advances in composite interfaces are scattered across the literature and are here assembled in a readily accessible form, bringing together recent developments in the field, both from the materials science and mechanics perspective, in a single convenient volume. The central theme of the book is tailoring the interface science of composites to optimize the basic physical principles rather than on the use of materials and the mechanical performance and structural integrity of composites with enhanced strength/stiffness and fracture toughness (or specific fracture resistance). It also deals mainly with interfaces in advanced composites made from high-performance fibers, such as glass, carbon, aramid, and some inorganic fibers, and matrix materials encompassing polymers, carbon, metals/alloys, and ceramics. Includes chapter on the development of a nanolevel dispersion of graphene particles in a polymer matrix Focus on tailoring the interface science of composites to optimize the basic physical principles Covers mainly interfaces in advanced composites made from high performance fibers
Download or read book Textile Finishing written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2017-08-22 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book details the recent and exciting developments on various fronts in the textile field with regard to novel and innovative functionalities, as well as their applications in various industries. Technical textiles are used in various industries for a host of purposes and applications. Recent developments in novel and innovative functionalities to textiles include easy-to-clean or dirt-repellent, flame retardancy, anti-bacterial, and fog-harvesting properties. Textiles for electronics based on graphene, CNTs and other nanomaterials, conductive textiles, textiles for sensor function, textile-fixed catalysts, textiles for batteries and energy storage, textiles as substrates for tissue engineering, and textiles for O/W separation are prevalent as well. All this development has been made possible through adopting novel ways for finishing textiles, e.g., by appropriate surface modification techniques, and utilizing biomimetic concepts borrowed from nature. This unique book is divided into four parts: Part 1: Recent Developments/Current Challenges in Textile Finishing; Part 2: Surface Modification Techniques for Textiles; Part 3: Innovative Functionalities of Textiles; Part 4: Fiber-Reinforced Composites. The topics covered include: Antimicrobial textile finishes; flame retardant textile finishing; "self-cleaning" or easy-to-clean textiles; metallization of textiles; atmospheric pressure plasma, and UV-based photochemical surface modification of textiles; tunable wettability of textiles; 3D textile structures for fog harvesting; textile-fixed catalysts; medical textiles as substrates for tissue engineering; and fiber-reinforced "green" or "greener" biocomposites and the relevance of fiber/matrix adhesion.
Download or read book Advanced Topics in Characterization of Composites written by Michael R. Kessler and published by Trafford Publishing. This book was released on 2004 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Topics in Characterization of Composites is a product of the ''Characterization of Composite Materials" graduate course in the Department of Mechanical Engineering at The University of Tulsa. It contains a series of chapters describing characterization techniques for polymer-matrix composite materials. Topics covered include: -thermal analysis using DSC, -residual stresses, -single-fiber fragmentation testing, -creep and creep nature, -impact testing, -infrared thermography, -air-coupled ultrasonics, -structural health monitoring, and -fractography. The chapters include comprehensive literature reviews, background information, and best practices in experimental composites evaluation.
Download or read book Proceedings of the American Society for Composites Seventeenth Technical Conference written by C. T. Sun and published by CRC Press. This book was released on 2002-10-24 with total page 1685 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integrated Biomaterials Science written by Rolando Barbucci and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Biomaterials Science provides an intriguing insight into the world of biomaterials. It explores the materials and technology which have brought advances in new biomaterials, highlighting the way in which modern biology and medicine are synergistically linked to other key scientific disciplines-physics, chemistry, and engineering. In doing so, Integrated Biomaterials Science contains chapters on tissue engineering and gene therapy, standards and parameters of biomaterials, applications and interactions within the industrial world, as well as potential aspects of patent regulations. Integrated Biomaterials Science serves as a comprehensive guide to understanding this dynamic field, yet is designed so that chapters may be read and understood independently, depending on the needs of the reader. Integrated Biomaterials Science is attractive to a broad audience interested in a deeper understanding of this evolving field, and serves as a key resource for researchers and students of biomaterials courses, providing all with an opportunity to probe further.
Download or read book Proceedings of the Twelfth U S Japan Conference on Composite Materials written by P. K. Mallick and published by DEStech Publications, Inc. This book was released on 2006 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
