Download or read book International Energy Conservation Code written by International Code Council and published by . This book was released on 2010-01-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Study Companion is a comprehensive self-study guide for the 2009 International Energy Conservation Code. Ten study sessions cover administration and enforcement as well as energy efficiency in residential and commercial structures. A 20-question quiz is provided at the end of each study session.

Download or read book Building Energy Simulation written by Vishal Garg and published by CRC Press. This book was released on 2020-08-17 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Building Energy Simulation includes studies of various components and systems of buildings and their effect on energy consumption, with the help of DesignBuilderTM, a front-end for the EnergyPlus simulation engine, supported by examples and exercises. The book employs a "learning by doing" methodology. It explains simulation-input parameters and how-to-do analysis of the simulation output, in the process explaining building physics and energy simulation. Divided into three sections, it covers the fundamentals of energy simulation followed by advanced topics in energy simulation and simulation for compliance with building codes and detailed case studies for comprehensive building energy simulation. Features: Focuses on learning building energy simulation while being interactive through examples and exercises. Explains the building physics and the science behind the energy performance of buildings. Encourages an integrated design approach by explaining the interactions between various building systems and their effect on energy performance of building. Discusses a how-to model for building energy code compliance including three projects to practice whole building simulation. Provides hands-on training of building energy simulation tools: DesignBuilderTM and EnergyPlus. Includes practical projects problems, appendices and CAD files in the e-resources section. Building Energy Simulation is intended for students and researchers in building energy courses, energy simulation professionals, and architects.

Download or read book Building Energy Modeling with OpenStudio written by Larry Brackney and published by Springer. This book was released on 2018-05-15 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook teaches the fundamentals of building energy modeling and analysis using open source example applications built with the US DOE’s OpenStudio modeling platform and EnergyPlus simulation engine. Designed by researchers at US National Laboratories to support a new generation of high performance buildings, EnergyPlus and OpenStudio are revolutionizing how building energy modeling is taught in universities and applied by professional architects and engineers around the world. The authors, all researchers at National Renewable Energy Laboratory and members of the OpenStudio software development team, present modeling concepts using open source software that may be generally applied using a variety of software tools commonly used by design professionals. The book also discusses modeling process automation in the context of OpenStudio Measures—small self-contained scripts that can transform energy models and their data—to save time and effort. They illustrate key concepts through a sophisticated example problem that evolves in complexity throughout the book. The text also examines advanced topics including daylighting, parametric analysis, uncertainty analysis, design optimization, and model calibration. Building Energy Modeling with OpenStudio teaches students to become sophisticated modelers rather than simply proficient software users. It supports undergraduate and graduate building energy courses in Architecture, and in Mechanical, Civil, Architectural, and Sustainability Engineering.

Download or read book Energy Simulation in Building Design written by Joseph Clarke and published by Routledge. This book was released on 2007-11-02 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the appearance of the first edition of 'Energy Simulation in Building Design', the use of computer-based appraisal tools to solve energy design problems within buildings has grown rapidly. A leading figure in this field, Professor Joseph Clarke has updated his book throughout to reflect these latest developments. The book now includes material on combined thermal/lighting and CFD simulation, advanced glazings, indoor air quality and photovoltaic components. This thorough revision means that the book remains the key text on simulation for architects, building engineering consultants and students of building engineering and environmental design of buildings. The book's purpose is to help architects, mechanical & environmental engineers and energy & facility managers to understand and apply the emerging computer methods for options appraisal at the individual building, estate, city, region and national levels. This is achieved by interspersing theoretical derivations relating to simulation within an evolving description of the built environment as a complex system. The premise is that the effective application of any simulation tool requires a thorough understanding of the domain it addresses.

Download or read book Energy and Climate in the Urban Built Environment written by M. Santamouris and published by Routledge. This book was released on 2013-06-17 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both the number and percentage of people living in urban areas is growing rapidly. Up to half of the world's population is expected to be living in a city by the end of the century and there are over 170 cities in the world with populations over a million. Cities have a huge impact on the local climate and require vast quantities of energy to keep them functioning. The urban environment in turn has a big impact on the performance and needs of buildings. The size, scale and mechanism of these interactions is poorly understood and strategies to mitigate them are rarely implemented. This is the first comprehensive book to address these questions. It arises out of a programme of work (POLISTUDIES) carried out for the Save programme of the European Commission. Chapters describe not only the main problems encountered such as the heat island and canyon effects, but also a range of design solutions that can be adopted both to improve the energy performance and indoor air quality of individual buildings and to look at aspects of urban design that can reduce these climatic effects. The book concludes with some examples of innovative urban bioclimatic buildings. The project was co-ordinated by Professor Mat Santamouris from the University of Athens who is also the editor of the book. Other contributions are from the University of Thessaloniki, Greece, ENTPE, Lyons, France and the University of Stuttgart, Germany.

Download or read book Innovative Models for Sustainable Development in Emerging African Countries written by Niccolò Aste and published by Springer Nature. This book was released on 2019-12-30 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book explores key issues and presents recent case studies in areas of importance for the transition to a circular model of development in emerging African countries that will minimize resource consumption and waste production. The topics covered include the development of sustainable housing models, energy and environmental issues in building design and technical systems, recycling for a sustainable future, models for humanitarian emergencies, and low-cost and web-based digital tools with applications in architecture and archaeology. The aim is to contribute to a necessary paradigm shift with respect to urban planning and usage of territories, moving from a linear urban metabolism based on the “take, make, dispose” approach to a circular metabolism. Such a change requires a focus on the relationship between the architectural, urban, and physical aspects of new developments, climate, and energy demand, as well as the identification and integration of strategies and infrastructures to achieve a high level of efficiency and self-sufficiency. The book will appeal to all with an interest in sustainable development in the African context.

Download or read book Building Performance Simulation for Design and Operation written by Jan L.M. Hensen and published by Routledge. This book was released on 2012-09-10 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective building performance simulation can reduce the environmental impact of the built environment, improve indoor quality and productivity, and facilitate future innovation and technological progress in construction. It draws on many disciplines, including physics, mathematics, material science, biophysics and human behavioural, environmental and computational sciences. The discipline itself is continuously evolving and maturing, and improvements in model robustness and fidelity are constantly being made. This has sparked a new agenda focusing on the effectiveness of simulation in building life-cycle processes. Building Performance Simulation for Design and Operation begins with an introduction to the concepts of performance indicators and targets, followed by a discussion on the role of building simulation in performance-based building design and operation. This sets the ground for in-depth discussion of performance prediction for energy demand, indoor environmental quality (including thermal, visual, indoor air quality and moisture phenomena), HVAC and renewable system performance, urban level modelling, building operational optimization and automation. Produced in cooperation with the International Building Performance Simulation Association (IBPSA), and featuring contributions from fourteen internationally recognised experts in this field, this book provides a unique and comprehensive overview of building performance simulation for the complete building life-cycle from conception to demolition. It is primarily intended for advanced students in building services engineering, and in architectural, environmental or mechanical engineering; and will be useful for building and systems designers and operators.

Download or read book 3D Geoinformation Science written by Martin Breunig and published by Springer. This book was released on 2014-11-29 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays 3D Geoinformation is needed for many planning and analysis tasks. For example, 3D city and infrastructure models are paving the way for complex environmental and noise analyzes. 3D geological sub-surface models are needed for reservoir exploration in the oil-, gas-, and geothermal industry. Thus 3D Geoinformation brings together researchers and practitioners from different fields such as the geo-sciences, civil engineering, 3D city modeling, 3D geological and geophysical modeling, and, last but not least, computer science. The diverse challenges of 3D Geoinformation Science concern new approaches and the development of standards for above- and under-ground 3D modeling, efficient 3D data management, visualization and analysis. Finally, the integration of different 3D approaches and data models is seen as one of the most important challenges to be solved.

Download or read book The Empirical Validation of House Energy Rating HER Software for Lightweight Housing in Cool Temperate Climates written by Mark Andrew Dewsbury and published by Springer. This book was released on 2015-02-02 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the first empirical validation of “AccuRate,” Australia’s national benchmark software tool for house energy ratings. The validation was conducted by the University of Tasmania in collaboration with Forest and Wood Products Australia, the Australian Government, the CSIRO and industry partners. The study presented here describes the results of graphical and statistical analysis of variations observed between the measured and simulated data from three different test buildings in Launceston, Tasmania. It shows that, while the AccuRate software is well suited to modeling energy flows, there are discrepancies between the simulated and measured temperatures of the test buildings. Moreover, it highlights possible connections between the discrepancies in all zones and the outside air temperature, wind speed, global and diffuse solar radiation, and possibly the ground model. Beyond its contribution to further investigations into the ongoing improvement and calibration of the Australian NatHERS-supported AccuRate software, this book also meticulously describes the methodology used in conducting the research, which is expected to pave the way for further studies of this type.

Download or read book Energy Conservation in Residential Commercial and Industrial Facilities written by Hossam A. Gabbar and published by John Wiley & Sons. This book was released on 2018-06-27 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative and comprehensive guide to managing energy conservation in infrastructures Energy Conservation in Residential, Commercial, and Industrial Facilities offers an essential guide to the business models and engineering design frameworks for the implementation of energy conservation in infrastructures. The presented models of both physical and technological systems can be applied to a wide range of structures such as homes, hotels, public facilities, industrial facilities, transportation, and water/energy supply systems. The authors—noted experts in the field—explore the key performance indicators that are used to evaluate energy conservation strategies and the energy supply scenarios as part of the design and operation of energy systems in infrastructures. The text is based on a systems approach that demonstrates the effective management of building energy knowledge and supports the simulation, evaluation, and optimization of several building energy conservation scenarios. In addition, the authors explore new methods of developing energy semantic network (ESN) superstructures, energy conservation optimization techniques, and risk-based life cycle assessments. This important text: Defines the most effective ways to model the infrastructure of physical and technological systems Includes information on the most widely used techniques in the validation and calibration of building energy simulation Offers a discussion of the sources, quantification, and reduction of uncertainty Presents a number of efficient energy conservation strategies in infrastructure systems, including HVAC, lighting, appliances, transportation, and industrial facilities Describes illustrative case studies to demonstrate the proposed energy conservation framework, practices, methods, engineering designs, control, and technologies Written for students studying energy conservation as well as engineers designing the next generation of buildings, Energy Conservation in Residential, Commercial, and Industrial Facilities offers a wide-ranging guide to the effective management of energy conservation in infrastructures.

Download or read book Energy Audit of Building Systems written by Moncef Krarti and published by CRC Press. This book was released on 2020-12-01 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated to include recent advances, this third edition presents strategies and analysis methods for conserving energy and reducing operating costs in residential and commercial buildings. The book explores the latest approaches to measuring and improving energy consumption levels, with calculation examples and Case Studies. It covers field testing, energy simulation, and retrofit analysis of existing buildings. It examines subsystems—such as lighting, heating, and cooling—and techniques needed for accurately evaluating them. Auditors, managers, and students of energy systems will find this book to be an invaluable resource for their work. Explores state-of-the-art techniques and technologies for reducing energy combustion in buildings. Presents the latest energy efficiency strategies and established methods for energy estimation. Provides calculation examples that outline the application of the methods described. Examines the major building subsystems: lighting, heating, and air-conditioning. Addresses large-scale retrofit analysis approaches for existing building stocks. Introduces the concept of energy productivity to account for the multiple benefits of energy efficiency for buildings. Includes Case Studies to give readers a realistic look at energy audits. Moncef Krarti has vast experience in designing, testing, and assessing innovative energy efficiency and renewable energy technologies applied to buildings. He graduated from the University of Colorado with both MS and PhD in Civil Engineering. Prof. Krarti directed several projects in designing energy-efficient buildings with integrated renewable energy systems. He has published over 3000 technical journals and handbook chapters in various fields related to energy efficiency, distribution generation, and demand-side management for the built environment. Moreover, he has published several books on building energy-efficient systems. Prof. Krarti is Fellow member to the American Society for Mechanical Engineers (ASME), the largest international professional society. He is the founding editor of the ASME Journal of Sustainable Buildings & Cities Equipment and Systems. Prof. Krarti has taught several different courses related to building energy systems for over 20 years in the United States and abroad. As a professor at the University of Colorado, Prof. Krarti has been managing the research activities of an energy management center at the school with an emphasis on testing and evaluating the performance of mechanical and electrical systems for residential and commercial buildings. He has also helped the development of similar energy efficiency centers in other countries, including Brazil, Mexico, and Tunisia. In addition, Prof. Krarti has extensive experience in promoting building energy technologies and policies overseas, including the establishment of energy research centers, the development of building energy codes, and the delivery of energy training programs in several countries.

Download or read book Department of the Interior and Related Agencies Appropriations for 1997 written by United States. Congress. House. Committee on Appropriations. Subcommittee on Department of the Interior and Related Agencies and published by . This book was released on 1996 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Solar Energy Update written by and published by . This book was released on 1984 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-10 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Abstracts for Policy Analysis written by and published by . This book was released on 1987 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Building Energy Research written by Mat Santamouris and published by Earthscan. This book was released on 2012-05-23 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experts on energy efficiency and environmental quality of buildings. Spanning a broad range of technical subjects, this is a 'must have' reference on global developments in the field, suitable for architects and building engineers, environmental engineers, industry professionals, students, teachers and researchers in building science, technical libraries and laboratories. This first volume covers double skin faï¿1⁄2ades; artificial intelligence in buildings; indoor thermal comfort and the progress of the adaptive approach; heat island research and the effect of urban microclimate; the use of techniques such as high dynamic range imaging and satellite remote sensing; and vital management and monitoring approaches such as post-occupancy evaluation.

Download or read book Thermal Evaluation of Indoor Climate and Energy Storage in Buildings written by Shailendra Kumar Shukla and published by CRC Press. This book was released on 2024-08-19 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a need to reduce energy consumption for space cooling and heating via energy efficient solutions/technologies for implementation in the buildings. Thermal energy storage regulates indoor temperature, shifting the peak load to the off-peak hours and reducing the energy need for space cooling and heating. This book presents the most recent advances related to the thermal energy storage system design and integration in buildings. Additionally, modelling, application, synthetization, and characterization of energy efficient building materials are also considered. Features: Provides a deep understanding of thermal energy storage technology and summarizes its utility and feasibility that can be commercially implemented worldwide Covers recent advancements related to thermal energy storage system design and integration in buildings Discusses modelling, application, synthetization, and characterization of energy-efficient building materials Details novel and emerging heat storage materials and their application to energy and environmental processes Highlights the need for future research on building comfort in cooling, heating, and ventilation through a green energy perspective This book is aimed at researchers and graduate students in mechanical, renewable energy, and HVAC engineering.