Download or read book Analysis of Laterally Loaded Piles in Multilayered Soil Deposits written by Dipanjan Basu and published by Purdue University Press. This book was released on 2007-10-01 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report focuses on the development of a new method of analysis of laterally loaded piles embedded in a multi-layered soil deposit treated as a three-dimensional continuum. Assuming that soil behaves as a linear elastic material, the governing differential equations for the deflection of laterally loaded piles were obtained using energy principles and calculus of variations. The differential equations were solved using both the method of initial parameters and numerical techniques. Soil resistance, pile deflection, slope of the deflected pile, bending moment and shear force can be easily obtained at any depth along the entire pile length. The results of the analysis were in very good agreement with three-dimensional finite element analysis results. The analysis was further extended to account for soil nonlinearity. A few simple constitutive relationships that allow for modulus degradation with increasing strain were incorporated into the analysis. The interaction of piles in groups was also studied.
Download or read book The Pressuremeter written by Jean-Louis Briaud and published by Routledge. This book was released on 2019-07-16 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic title deals presents all one needs to know about pressuremeter test, a soil and rock test used in civil engineering. It consists of placing a cylindrical probe in the ground and expanding the probe to pressurize the soil or the rock horizontally. The pressure on the soil and the relative increase in cavity radius are obtained and give an in situ stress strain curve. The pressuremeter test is repeated at various depths in order to obtain profiles of soil parameters. The design applications of the preboring pressuremeter test include: shallow foundations under vertical loads, deep foundations under vertical and horizontal loads, ground anchors, cantilever drilled shaft walls and anchored bulkheads, pavements, stone columns, ground improvement and compaction control.
Download or read book Pile Driving by Pile Buck written by Pile Buck International and published by Lulu.com. This book was released on 2009-11-13 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive reference for driven piles. Nearly six years in the making, Pile Driving by Pile Buck is a comprehensive reference book on the history of pile driving and driven piles, the various types of piles, the equipment used to install them, the design of driven pile foundations, the installation of driven piles and the capacity verification of driven piles. Not just another theoretical exercise, Pile Driving by Pile Buck gives practical procedures and equipment configurations for the successful installation of virtually any driven pile foundations. Included with the text are a wealth of photographs without equal in this type of publication; the photos alone are worth the price of the book, and help bring the reader "on site" to understand the whole process of pile driving--one of the oldest construction techniques known.
Download or read book Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering written by The Organizing Committee of the 16th ICSMGE and published by IOS Press. This book was released on 2005-09-12 with total page 3742 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 16th ICSMGE responds to the needs of the engineering and construction community, promoting dialog and exchange between academia and practice in various aspects of soil mechanics and geotechnical engineering. This is reflected in the central theme of the conference 'Geotechnology in Harmony with the Global Environment'. The proceedings of the conference are of great interest for geo-engineers and researchers in soil mechanics and geotechnical engineering. Volume 1 contains 5 plenary session lectures, the Terzaghi Oration, Heritage Lecture, and 3 papers presented in the major project session. Volumes 2, 3, and 4 contain papers with the following topics: Soil mechanics in general; Infrastructure and mobility; Environmental issues of geotechnical engineering; Enhancing natural disaster reduction systems; Professional practice and education. Volume 5 contains the report of practitioner/academic forum, 20 general reports, a summary of the sessions and workshops held during the conference.
Download or read book Single Piles and Pile Groups Under Lateral Loading written by Lymon C. Reese and published by CRC Press. This book was released on 2010-12-15 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complexities of designing piles for lateral loads are manifold as there are many forces that are critical to the design of big structures such as bridges, offshore and waterfront structures and retaining walls. The loads on structures should be supported either horizontally or laterally or in both directions and most structures have in common t
Download or read book Basics of Foundation Design written by Bengt Fellenius and published by Lulu.com. This book was released on 2017-03-17 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "Red Book" presents a background to conventional foundation analysis and design. The text is not intended to replace the much more comprehensive 'standard' textbooks, but rather to support and augment these in a few important areas, supplying methods applicable to practical cases handled daily by practising engineers and providing the basic soil mechanics background to those methods. It concentrates on the static design for stationary foundation conditions. Although the topic is far from exhaustively treated, it does intend to present most of the basic material needed for a practising engineer involved in routine geotechnical design, as well as provide the tools for an engineering student to approach and solve common geotechnical design problems.
Download or read book Theory and Practice of Pile Foundations written by Wei Dong Guo and published by CRC Press. This book was released on 2012-11-14 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pile Foundations are an essential basis for many structures. It is vital that they be designed with the utmost reliability, because the cost of failure is potentially huge. Covering a whole range of design issues relating to pile design, this book presents economical and efficient design solutions and demonstrates them using real world examples. Coverage includes nonlinear response of single piles to vertical or torsional loading and to cyclic lateral loading, as well as prediction of nonlinear response of lateral pile groups, vertically loaded pile groups and the design of slope stabilising piles. Most solutions are provided as closed-form expressions. Theory and Practice of Pile Foundations is: illustrated with case studies accompanied by practical applications in Excel and MathCad the first book to incorporate nonlinear interaction into pile design. A valuable resource for students of geotechnical engineering taking courses in foundations and a vital tool for engineers designing pile foundations.
Download or read book Subsurface Conditions written by Michael Shaw Rosenbaum and published by Springer Science & Business Media. This book was released on 2003-05-15 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterisation of the shallow subsurface provides civil, geotechnical and environmental applications with precise definitions of geomechanical and geohydrological properties. Over the past decade, the rapid pace of technological innovation has outstripped the ability of many researchers and potential users to evaluate and adopt promising new characterisation methods. Modern information technologies and information management concepts provide the basis of new paradigms and applications. This book defines future research needs for geological modelling and ground characterisation, including better dialogue between data provides and users and faster, better and less expensive methods for the creation and dissemination of subsurface characterisations.
Download or read book Drilled Shafts written by Michael W. O'Neill and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Pressuremeter and Foundation Engineering written by F. Baguelin and published by . This book was released on 1978 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical Abstracts written by and published by . This book was released on 1986 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pressuremeter Testing written by R. J. Mair and published by Elsevier. This book was released on 2013-10-22 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressuremeter Testing: Methods and Interpretation the history, applications, and development of pressumeter devices and related test procedures. The book covers topics such as the general principles of pressuremeter testing; types of pressuremeters and their installation and calibration; and the estimation of soil from pressuremeter tests in clays, sands, and weak rocks. Also included are topics such as the application of pressuremeter testing to design and research in the improvement of the use of pressuremeters. An appendix is also included; Appendix A covers the analysis of pressuremeter tests, and Appendix B contains guidance notes for the specifications of pressuremeter tests. The text is recommended for engineers and geologists who would like to know more about the applications of the pressuremeter and the interpretation of its results.
Download or read book Tall Building Foundation Design written by Harry G. Poulos and published by CRC Press. This book was released on 2017-07-20 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive guide to the design of foundations for tall buildings. After a general review of the characteristics of tall buildings, various foundation options are discussed followed by the general principles of foundation design as applied to tall buildings. Considerable attention is paid to the methods of assessment of the geotechnical design parameters, as this is a critical component of the design process. A detailed treatment is then given to foundation design for various conditions, including ultimate stability, serviceability, ground movements, dynamic loadings and seismic loadings. Basement wall design is also addressed. The last part of the book deals with pile load testing and foundation performance measurement, and finally, the description of a number of case histories. A feature of the book is the emphasis it places on the various stages of foundation design: preliminary, detailed and final, and the presentation of a number of relevant methods of design associated with each stage.
Download or read book Analysis of Pile Foundations Subject to Static and Dynamic Loading written by Amir M. Kaynia and published by CRC Press. This book was released on 2021-08-30 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents computational tools and design principles for piles used in a wide range of applications and for different loading conditions. The chapters provide a mixture of basic engineering solutions and latest research findings in a balanced manner. The chapters are written by world-renowned experts in the field. The materials are presented in a unified manner based on both simplified and rigorous numerical methods. The first four chapters present the basic elements and steps in analysis of piles under static and cyclic loading together with clear references to the appropriate design regulations in Eurocode 7 when relevant. The analysis techniques cover conventional code-based methods, solutions based on pile-soil interaction springs, and advanced 3D finite element methods. The applications range from conventional piles to large circular steel piles used as anchors or monopiles in offshore applications. Chapters 5 to 10 are devoted to dynamic and earthquake analyses and design. These chapters cover a range of solutions from dynamic pile-soil springs to elasto-dynamic solutions of large pile groups. Both linear and nonlinear soil behaviours are considered along with response due to dynamic loads and earthquake shaking including possible liquefaction. The book is unique in its unified treatment of the solutions used for static and dynamic analysis of piles with practical examples of application. The book is considered a valuable tool for practicing engineers, graduate students and researchers.
Download or read book Piles in Weak Rock written by and published by Thomas Telford. This book was released on 1977 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for Cone Penetration Test written by United States. Federal Highway Administration. Implementation Division and published by . This book was released on 1977 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual presents procedures and guidelines applicable to the use of the cone penetration test. It represents the author's interpretation of the state-of-the-art in Dutch static cone testing as of February 1977. Its contents should provide assistance and uniformity to engineers concerned with the interpretation of the data obtained from such testing. Only geotechnical engineers familiar with the fundamentals of soil mechanics and foundation engineering should use this manual. The manual includes: Introduction and review of the general principals concerning cone penetrometer testing. Individual design chapters which address topics such as: pile design, shear strength estimation, settlement calculation and compaction control; and Appendices which present previously published, pertinent information on cone penetrometer testing.
Download or read book Geotechnical Engineering written by V.N.S. Murthy and published by CRC Press. This book was released on 2002-10-25 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt: A must have reference for any engineer involved with foundations, piers, and retaining walls, this remarkably comprehensive volume illustrates soil characteristic concepts with examples that detail a wealth of practical considerations, It covers the latest developments in the design of drilled pier foundations and mechanically stabilized earth retaining wall and explores a pioneering approach for predicting the nonlinear behavior of laterally loaded long vertical and batter piles. As complete and authoritative as any volume on the subject, it discusses soil formation, index properties, and classification; soil permeability, seepage, and the effect of water on stress conditions; stresses due to surface loads; soil compressibility and consolidation; and shear strength characteristics of soils. While this book is a valuable teaching text for advanced students, it is one that the practicing engineer will continually be taking off the shelf long after school lets out. Just the quick reference it affords to a huge range of tests and the appendices filled with essential data, makes it an essential addition to an civil engineering library.
