Download or read book Structural Steel Design to Eurocode 3 and AISC Specifications written by Claudio Bernuzzi and published by John Wiley & Sons. This book was released on 2016-02-25 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Steel Design to Eurocode 3 and AISC Specifications deals with the theory and practical applications of structural steel design in Europe and the USA. The book covers appropriate theoretical and background information, followed by a more design‐oriented coverage focusing on European and United States specifications and practices, allowing the reader to directly compare the approaches and results of both codes. Chapters follow a general plan, covering: A general section covering the relevant topics for the chapter, based on classical theory and recent research developments A detailed section covering design and detailing to Eurocode 3 specification A detailed section covering design and detailing to AISC specifications Fully worked examples are using both codes are presented. With construction companies working in increasingly international environments, engineers are more and more likely to encounter both codes. Written for design engineers and students of civil and structural engineering, this book will help both groups to become conversant with both code systems.
Download or read book Design of Steel Structures to Eurocodes written by Ioannis Vayas and published by Springer. This book was released on 2018-11-23 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the rules for the design of steel and composite building structures according to Eurocodes, covering the structure as a whole, as well as the design of individual structural components and connections. It addresses the following topics: the basis of design in the Eurocodes framework; the loads applied to building structures; the load combinations for the various limit states of design and the main steel properties and steel fabrication methods; the models and methods of structural analysis in combination with the structural imperfections and the cross-section classification according to compactness; the cross-section resistances when subjected to axial and shear forces, bending or torsional moments and to combinations of the above; component design and more specifically the design of components sensitive to instability phenomena, such as flexural, torsional and lateral-torsional buckling (a section is devoted to composite beams); the design of connections and joints executed by bolting or welding, including beam to column connections in frame structures; and alternative configurations to be considered during the conceptual design phase for various types of single or multi-storey buildings, and the design of crane supporting beams. In addition, the fabrication and erection procedures, as well as the related quality requirements and the quality control methods are extensively discussed (including the procedures for bolting, welding and surface protection). The book is supplemented by more than fifty numerical examples that explain in detail the appropriate procedures to deal with each particular problem in the design of steel structures in accordance with Eurocodes. The book is an ideal learning resource for students of structural engineering, as well as a valuable reference for practicing engineers who perform designs on basis of Eurocodes.
Download or read book Steel Designers Manual written by SCI (Steel Construction Institute) and published by John Wiley & Sons. This book was released on 2016-06-27 with total page 1410 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2010 the then current European national standards for building and construction were replaced by the EN Eurocodes, a set of pan-European model building codes developed by the European Committee for Standardization. The Eurocodes are a series of 10 European Standards (EN 1990 – EN 1999) that provide a common approach for the design of buildings, other civil engineering works and construction products. The design standards embodied in these Eurocodes will be used for all European public works and are set to become the de-facto standard for the private sector in Europe, with probable adoption in many other countries. This classic manual on structural steelwork design was first published in 1955, since when it has sold many tens of thousands of copies worldwide. For the seventh edition of the Steel Designers' Manual all chapters have been comprehensively reviewed, revised to ensure they reflect current approaches and best practice, and brought in to compliance with EN 1993: Design of Steel Structures (the so-called Eurocode 3).
Download or read book Eurocode 3 Design of Steel Structures Part 4 1 Silos written by and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of International Bridge Engineering written by Wai-Fah Chen and published by CRC Press. This book was released on 2013-10-11 with total page 1383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and up-to-date reference work and resource book covers state-of-the-art and state-of-the-practice for bridge engineering worldwide. Countries covered include Canada and the United States in North America; Argentina and Brazil in South America; Bosnia, Bulgaria, Croatia, Czech Republic, Denmark, Finland, France, Greece, Macedonia,
Download or read book Shell Structures Theory and Applications Volume 4 written by Wojciech Pietraszkiewicz and published by CRC Press. This book was released on 2017-10-30 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shells are basic structural elements of modern technology and everyday life. Examples of shell structures in technology include automobile bodies, water and oil tanks, pipelines, silos, wind turbine towers, and nanotubes. Nature is full of living shells such as leaves of trees, blooming flowers, seashells, cell membranes or wings of insects. In the human body arteries, the eye shell, the diaphragm, the skin and the pericardium are all shells as well. Shell Structures: Theory and Applications, Volume 4 contains 132 contributions presented at the 11th Conference on Shell Structures: Theory and Applications (Gdansk, Poland, 11-13 October 2017). The papers reflect a wide spectrum of scientific and engineering problems from theoretical modelling through strength, stability and dynamic behaviour, numerical analyses, biomechanic applications up to engineering design of shell structures. Shell Structures: Theory and Applications, Volume 4 will be of interest to academics, researchers, designers and engineers dealing with modelling and analyses of shell structures. It may also provide supplementary reading to graduate students in Civil, Mechanical, Naval and Aerospace Engineering.
Download or read book Performance of Bio based Building Materials written by Dennis Jones and published by Woodhead Publishing. This book was released on 2017-07-07 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance of Bio-based Building Materials provides guidance on the use of bio-based building materials (BBBM) with respect to their performance. The book focuses on BBBM currently present on the European market. The state-of-the-art is presented regarding material properties, recommended uses, performance expectancies, testing methodology, and related standards. Chapters cover both 'old and traditional' BBBM since quite a few of them are experiencing a comeback on the market. Promising developments that could become commercial in the near future are presented as well. The book will be a valuable reference resource for those working in the bio-based materials research community, architects and agencies dealing with sustainable construction, and graduate students in civil engineering. - Takes a unique approach to bio-based materials and presents a broad overview of the topics on relevant areas necessary for application and promotion in construction - Contains a general description, notable properties related to performance, and applications - Presents standards that are structured according to performance types
Download or read book Fatigue Design of Steel and Composite Structures written by Alain Nussbaumer and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the specific subject of fatigue, a subject not familiar to many engineers, but still relevant for proper and good design of numerous steel structures. It explains all issues related to the subject: Basis of fatigue design, reliability and various verification formats, determination of stresses and stress ranges, fatigue strength, application range and limitations. It contains detailed examples of applications of the concepts, computation methods and verifications.
Download or read book Confined Granular Flow in Silos written by Jacek Tejchman and published by Springer Science & Business Media. This book was released on 2013-05-15 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: During confined flow of bulk solids in silos some characteristic phenomena can be created, such as: sudden and significant increase of wall stresses, different flow patterns, formation and propagation of wall and interior shear zones, fluctuation of pressures and, strong autogenous dynamic effects. These phenomena have not been described or explained in detail yet. The main intention of the experimental and theoretical research presented in this book is to explain the above mentioned phenomena in granular bulk solids and to describe them with numerical FE models verified by experimental results.
Download or read book Fatigue Design of Steel and Composite Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2018-06-26 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the specific subject of fatigue, a subject not familiar to many engineers, but still relevant for proper and good design of numerous steel structures. It explains all issues related to the subject: Basis of fatigue design, reliability and various verification formats, determination of stresses and stress ranges, fatigue strength, application range and limitations. It contains detailed examples of applications of the concepts, computation methods and verifications.
Download or read book Silos written by C.J. Brown and published by CRC Press. This book was released on 1998-05-21 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the leading European expertise in behaviour and design of silos, this important new book is an essential reference source for all concerned with current problems and developments in silo technology. Silos are used in an enormous range of industries and the handling characteristics of many industrial materials require different approaches for successful, economical installations. For the first time, the many approaches taken by specialists in different fields are brought together in a unified way so that common problems can be addressed. This book is the result of a four-year European project - Concerted Action - Silos - funded under the Brite Euram programme which has involved over 100 expert engineers and researchers from all over Europe, in seven working groups.
Download or read book Structures and Granular Solids written by Jian-Fei Chen and published by CRC Press. This book was released on 2008-06-23 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume features 29 invited papers presented at the Royal Society of Edinburgh on 1-2 July 2008 by colleagues, collaborators, students and friends of Professor J. Michael Rotter (FREng, FRSE, FICE, FASCE, FIStructE, FIEAust) in honour of his 60th birthday.The articles published in this volume will be of great value to readers as it contains con
Download or read book Advances in Steel Structures written by S.L. Chan and published by Elsevier. This book was released on 2002-11-15 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: These two volumes of proceedings contain nine invited keynote papers and 130 contributed papers presented at the Third International Conference on Advances in Steel Structures (ICASS '02) held on 9-11 December 2002 in Hong Kong, China. The conference is a sequel to the First and the Second International Conferences on Advances in Steel Structures held in Hong Kong in December 1996 and 1999. The conference provides a forum for discussion and dissemination by researchers and designers of recent advances in the analysis, behaviour, design and construction of steel structures. Papers were contributed from over 18 countries around the world. They report current state-of-the art and point to future directions of structural steel research, covering a wide spectrum of topics including: beams and columns; connections; scaffolds and slender structures; cold-formed steel; composite construction; plates; shells; bridges; dynamics; impact mechanics; effects of welding; fatigue and fracture; fire performance; and analysis and design.
Download or read book Seismic Design of Industrial Facilities written by Sven Klinkel and published by Springer Science & Business Media. This book was released on 2013-09-04 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Design of Industrial Facilities demands a deep knowledge on the seismic behaviour of the individual structural and non-structural components of the facility, possible interactions and last but not least the individual hazard potential of primary and secondary damages. From 26.-27. September 2013 the International Conference on Seismic Design of Industrial Facilities firstly addresses this broad field of work and research in one specialized conference. It brings together academics, researchers and professional engineers in order to discuss the challenges of seismic design for new and existing industrial facilities and to compile innovative current research. This volume contains 50 contributions to the SeDIF-Conference covering the following topics with respect to the specific conditions of plant design: · International building codes and guidelines on the seismic design of industrial facilities · Seismic design of non-structural components · Seismic design of silos and liquid-filled tanks - Soil-structure-interaction effects · Seismic safety evaluation, uncertainties and reliability analysis · Innovative seismic protection systems · Retrofitting The SeDIF-Conference is hosted by the Chair of Structural Statics and Dynamics of RWTH Aachen University, Germany, in cooperation with the Institute for Earthquake Engineering of the Dalian University of Technology, China.
Download or read book Progress in Industrial Mathematics at ECMI 2004 written by Alessandro Di Bucchianico and published by Springer Science & Business Media. This book was released on 2006-01-09 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: ECMI has a brand name in Industrial Mathematics and organises successful biannual conferences. This time, the conference on Industrial Mathematics held in Eindhoven in June 2004 Mathematics focused on Aerospace, Electronic Industry, Chemical Technology, Life Sciences, Materials, Geophysics, Financial Mathematics and Water flow. The majority of the invited talks on these topics can be found in these proceedings. Apart from these lectures, a large number of contributed papers and minisymposium papers are included here. They give an interesting (and impressive) overview of the important place mathematics has achieved in solving all kinds of problems met in industry, and commerce in particular.
Download or read book Shell Structures Theory and Applications written by Wojciech Pietraszkiewicz and published by CRC Press. This book was released on 2013-09-18 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shells are basic structural elements of modern technology and everyday life. Examples are automobile bodies, water and oil tanks, pipelines, aircraft fuselages, nanotubes, graphene sheets or beer cans. Also nature is full of living shells such as leaves of trees, blooming flowers, seashells, cell membranes, the double helix of DNA or wings of insec
Download or read book Design Fabrication and Economy of Metal Structures written by Károly Jármai and published by Springer Science & Business Media. This book was released on 2013-03-15 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: These are the proceedings of the International Conference on Design, Fabrication and Economy of Metal Structures held on 24-26 April 2013 in Miskolc, Hungary which contain 99 papers covering: Structural optimization Thin-walled structures Stability Fatigue Frames Fire Fabrication Welding technology Applications Steel-concrete composite Special problems The authors are from 23 different countries, ensuring that the themes covered are of worldwide interest and importance. The International Institute of Welding (IIW), the International Society of Structural and Multidisciplinary Optimization (ISSMO), the TÁMOP 4.2.1.B-10/2/KONV-2010-0001 project entitled “Increasing the quality of higher education through the development of research - development and innovation program at the University of Miskolc supported by the European Union, co-financed by the European Social Fund” and many other sponsors helped organizers to collect these valuable studies, the results of which will provoke discussion, and provide an important reference for civil and mechanical engineers, architects, researchers and structural designers and fabricators, as well as managers in a range of industries including building, transport, shipbuilding, aircraft, chemical and offshore engineering.