Download or read book Introduction to Mineralogy and Petrology written by Swapan Kumar Haldar and published by Elsevier. This book was released on 2020-07-29 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Mineralogy and Petrology, second edition, presents the essentials of both disciplines through an approach accessible to industry professionals, academic researchers, and students alike. This new edition emphasizes the relationship between rocks and minerals, right from the structures created during rock formation through the economics of mineral deposits. While petrology is classified on the lines of geological evolution and rock formation, mineralogy speaks to the physical and chemical properties, uses, and global occurrences for each mineral, emphasizing the need for the growth of human development. The primary goal is for the reader to identify minerals in all respects, including host-rocks, and mineral deposits, with additional knowledge of mineral-exploration, resource, extraction, process, and ultimate use. To help provide a comprehensive analysis across ethical and socio-economic dimensions, a separate chapter describes the hazards associated with minerals, rocks, and mineral industries, and the consequences to humanity along with remedies and case studies. New to the second edition: includes coverage of minerals and petrology in extra-terrestrial environments as well as case studies on the hazards of the mining industry. Addresses the full scope of core concepts of mineralogy and petrology, including crystal structure, formation and grouping of minerals and soils, definition, origin, structure and classification of igneous, sedimentary and metamorphic rocks Features more than 250 figures, illustrations and color photographs to vividly explore the fundamental principles of mineralogy and petrology Offers a holistic approach to both subjects, beginning with the formation of geologic structures that is followed by the hosting of mineral deposits and the exploration and extraction of lucrative, usable products that improve the health of global economies Includes new content on minerals and petrology in extraterrestrial environments and case studies on hazards in the mining industry

Download or read book Different Approaches to Learning Science Technology Engineering and Mathematics written by Asian Development Bank and published by Asian Development Bank. This book was released on 2021-02-01 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science, technology, engineering, and mathematics (STEM) has an important role in ensuring inclusive and equitable quality education and promoting lifelong learning opportunities for all. By utilizing an inquiry- based and experiential teaching and learning approach as well as integrating engineering and technology with science and mathematics, STEM promotes employability skills, entrepreneurship, and innovation. This publication presents case studies on the successful application of STEM in Thailand, the Republic of Korea, Singapore, and Finland. It aims to provide inspiration and lessons for developing member countries of the Asian Development Bank to enhance and develop their respective STEM education programs.

Download or read book The Brown Boveri Review written by and published by . This book was released on 1982 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Signal Processing in Acoustics written by and published by Springer Science & Business Media. This book was released on 2008 with total page 1932 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Astromag written by and published by . This book was released on 1988 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Method of Matching Components and Predicting Performance of a Turbine propeller Engine written by Alois T. Sutor and published by . This book was released on 1951 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical expressions are derived to show the geometric, thermodynamic, and aerodynamic relations among compressor, turbine, and exhaust nozzle for a gas-turbine engine. For a known compressor performance map, a matching method is described to show some of the design compromises that must be made when the components are to be combined into a turbine-propeller engine. A method of predicting engine performance for a range of operating conditions from known component maps is presented. An illustrative example of the matching method and the performance analysis is presented, showing some of the practical limitations of engine operation.

Download or read book Weapons and Materials Research written by and published by . This book was released on 1998 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Coming of Age of Solar and Wind Power written by Tariq Muneer and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the current situation of two technologies for electricity production from renewable energy sources, wind and solar photovoltaic energy, analysing and describing both technologies in detail. Four regions of the world, with distinct energy markets and conditions, are explored. Together, the USA, Europe, China and Japan represent one third of the world's population and occupy 25% of the planet, therefore offering a representation of a global picture. In each of these regions, the development of the solar and wind energy is examined, and the economic implications are described.

Download or read book Gas Turbine Design Components and System Design Integration written by Meinhard T. Schobeiri and published by Springer Nature. This book was released on 2019-11-25 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second revised and enhanced edition of the book Gas Turbine Design, Components and System Integration written by a world-renowned expert with more than forty years of active gas turbine R&D experience. It comprehensively treats the design of gas turbine components and their integration into a complete system. Unlike many currently available gas turbine handbooks that provide the reader with an overview without in-depth treatment of the subject, the current book is concentrated on a detailed aero-thermodynamics, design and off-deign performance aspects of individual components as well as the system integration and its dynamic operation. This new book provides practicing gas turbine designers and young engineers working in the industry with design material that the manufacturers would keep proprietary. The book is also intended to provide instructors of turbomachinery courses around the world with a powerful tool to assign gas turbine components as project and individual modules that are integrated into a complete system. Quoting many statements by the gas turbine industry professionals, the young engineers graduated from the turbomachinery courses offered by the author, had the competency of engineers equivalent to three to four years of industrial experience.

Download or read book Propulsion and Power written by Joachim Kurzke and published by Springer. This book was released on 2018-05-28 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is written for engineers and students who wish to address the preliminary design of gas turbine engines, as well as the associated performance calculations, in a practical manner. A basic knowledge of thermodynamics and turbomachinery is a prerequisite for understanding the concepts and ideas described. The book is also intended for teachers as a source of information for lecture materials and exercises for their students. It is extensively illustrated with examples and data from real engine cycles, all of which can be reproduced with GasTurb (TM). It discusses the practical application of thermodynamic, aerodynamic and mechanical principles. The authors describe the theoretical background of the simulation elements and the relevant correlations through which they are applied, however they refrain from detailed scientific derivations.

Download or read book Gas Turbine Design Components and System Design Integration written by Meinhard T. Schobeiri and published by Springer. This book was released on 2017-06-06 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book written by a world-renowned expert with more than forty years of active gas turbine R&D experience comprehensively treats the design of gas turbine components and their integration into a complete system. Unlike many currently available gas turbine handbooks that provide the reader with an overview without in-depth treatment of the subject, the current book is concentrated on a detailed aero-thermodynamics, design and off-deign performance aspects of individual components as well as the system integration and its dynamic operation.This new book provides practicing gas turbine designers and young engineers working in the industry with design material that the manufacturers would keep proprietary. The book is also intended to provide instructors of turbomachinery courses around the world with a powerful tool to assign gas turbine components as project and individual modules that are integrated into a complete system. Quoting many statements by the gas turbine industry professionals, the young engineers graduated from the turbomachinery courses offered by the author, had the competency of engineers equivalent to three to four years of industrial experience.

Download or read book Machining written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2008-07-11 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining is one of the most important manufacturing processes. Parts manufactured by other processes often require further operations before the product is ready for application. “Machining: Fundamentals and Recent Advances” is divided into two parts. Part I explains the fundamentals of machining, with special emphasis on three important aspects: mechanics of machining, tools, and work-piece integrity. Part II is dedicated to recent advances in machining, including: machining of hard materials, machining of metal matrix composites, drilling polymeric matrix composites, ecological machining (minimal quantity of lubrication), high-speed machining (sculptured surfaces), grinding technology and new grinding wheels, micro- and nano-machining, non-traditional machining processes, and intelligent machining (computational methods and optimization). Advanced students, researchers and professionals interested or involved in modern manufacturing engineering will find the book a useful reference.

Download or read book Energy Efficiency and Management in Food Processing Facilities written by Lijun Wang and published by CRC Press. This book was released on 2008-12-04 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy efficiency, environmental protection, and processing waste management continue to attract increased attention in the food processing industry. As with other industrial sectors, reducing costs while also reducing environmental impact and improving overall sustainability is becoming an important part of the business process. Providing practica

Download or read book Fiber Bragg Grating Sensors Recent Advancements Industrial Applications and Market Exploitation written by Andrea Cusano and published by Bentham Science Publishers. This book was released on 2011 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is an exciting source of information for individuals interested in learning about and marketing sensors. The book focuses on scientific and commercial advances in Fiber Bragg Grating (FBG) sensor technology since its discovery over 30 years ago.

Download or read book Gas Turbines for Electric Power Generation written by S. Can Gülen and published by Cambridge University Press. This book was released on 2019-02-14 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this essential reference, both students and practitioners in the field will find an accessible discussion of electric power generation with gas turbine power plants, using quantitative and qualitative tools. Beginning with a basic discussion of thermodynamics of gas turbine cycles from a second law perspective, the material goes on to cover with depth an analysis of the translation of the cycle to a final product, facilitating quick estimates. In order to provide readers with the knowledge they need to design turbines effectively, there are explanations of simple and combined cycle design considerations, and state-of-the-art, performance prediction and optimization techniques, as well as rules of thumb for design and off-design performance and operational flexibility, and simplified calculations for myriad design and off-design performance. The text also features an introduction to proper material selection, manufacturing techniques, and construction, maintenance, and operation of gas turbine power plants.

Download or read book Aerothermodynamics of Gas Turbine and Rocket Propulsion written by Gordon C. Oates and published by AIAA. This book was released on 1997 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Diagnostics Risk Factors Treatment and Outcomes of Acute Kidney Injury in a New Paradigm written by Wisit Cheungpasitporn and published by MDPI. This book was released on 2020-12-10 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acute kidney injury (AKI) is a frequent clinical syndrome among hospitalized patients, independently associated with both short- and long-term mortality. Previous investigations attempted to identify effective interventions to prevent AKI or promote kidney function recovery in patients with AKI. Most were unsuccessful. Hence, additional studies are required in the field of AKI research. In this Special Issue, we are making a call to action to stimulate researchers and clinicians to submit their studies on AKI conducted in nephrology, internal medicine, critical care, and other disciplines that will provide additional knowledge and skills in the field of AKI research, ultimately to improve patient outcomes.