Download or read book Materials and Reliability Handbook for Semiconductor Optical and Electron Devices written by Osamu Ueda and published by Springer Science & Business Media. This book was released on 2012-09-24 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials and Reliability Handbook for Semiconductor Optical and Electron Devices provides comprehensive coverage of reliability procedures and approaches for electron and photonic devices. These include lasers and high speed electronics used in cell phones, satellites, data transmission systems and displays. Lifetime predictions for compound semiconductor devices are notoriously inaccurate due to the absence of standard protocols. Manufacturers have relied on extrapolation back to room temperature of accelerated testing at elevated temperature. This technique fails for scaled, high current density devices. Device failure is driven by electric field or current mechanisms or low activation energy processes that are masked by other mechanisms at high temperature. The Handbook addresses reliability engineering for III-V devices, including materials and electrical characterization, reliability testing, and electronic characterization. These are used to develop new simulation technologies for device operation and reliability, which allow accurate prediction of reliability as well as the design specifically for improved reliability. The Handbook emphasizes physical mechanisms rather than an electrical definition of reliability. Accelerated aging is useful only if the failure mechanism is known. The Handbook also focuses on voltage and current acceleration stress mechanisms.

Download or read book State of the Art Program on Compound Semiconductors 53 SOTAPOCS 53 written by M. E. Overberg and published by The Electrochemical Society. This book was released on 2011 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microwave and Millimeter Wave Circuits and Systems written by Apostolos Georgiadis and published by John Wiley & Sons. This book was released on 2012-09-17 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave and Millimeter Wave Circuits and Systems: Emerging Design, Technologies and Applications provides a wide spectrum of current trends in the design of microwave and millimeter circuits and systems. In addition, the book identifies the state-of-the art challenges in microwave and millimeter wave circuits systems design such as behavioral modeling of circuit components, software radio and digitally enhanced front-ends, new and promising technologies such as substrate-integrated-waveguide (SIW) and wearable electronic systems, and emerging applications such as tracking of moving targets using ultra-wideband radar, and new generation satellite navigation systems. Each chapter treats a selected problem and challenge within the field of Microwave and Millimeter wave circuits, and contains case studies and examples where appropriate. Key Features: Discusses modeling and design strategies for new appealing applications in the domain of microwave and millimeter wave circuits and systems Written by experts active in the Microwave and Millimeter Wave frequency range (industry and academia) Addresses modeling/design/applications both from the circuit as from the system perspective Covers the latest innovations in the respective fields Each chapter treats a selected problem and challenge within the field of Microwave and Millimeter wave circuits, and contains case studies and examples where appropriate This book serves as an excellent reference for engineers, researchers, research project managers and engineers working in R&D, professors, and post-graduates studying related courses. It will also be of interest to professionals working in product development and PhD students.

Download or read book AlGaN GaN HEMT power amplifiers with optimized power added efficiency for X band applications written by Jutta Kühn and published by KIT Scientific Publishing. This book was released on 2011 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has arisen out of the strong demand for a superior power-added efficiency (PAE) of AlGaN/GaN high electron mobility transistor (HEMT) high-power amplifiers (HPAs) that are part of any advanced wireless multifunctional RF-system with limited prime energy. Different concepts and approaches on device and design level for PAE improvements are analyzed, e.g. structural and layout changes of the GaN transistor and advanced circuit design techniques for PAE improvements of GaN HEMT HPAs.

Download or read book Microwave Journal written by and published by . This book was released on 2009 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Mems for Wireless and Mobile Applications written by Deepak Uttamchandani and published by Elsevier. This book was released on 2013-08-31 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand for mobile and wireless sensing necessitates the use of highly integrated technology featuring small size, low weight, high performance and low cost: micro-electro-mechanical systems (MEMS) can meet this need. The Handbook of MEMS for wireless and mobile applications provides a comprehensive overview of radio frequency (RF) MEMS technologies and explores the use of these technologies over a wide range of application areas.Part one provides an introduction to the use of RF MEMS as an enabling technology for wireless applications. Chapters review RF MEMS technology and applications as a whole before moving on to describe specific technologies for wireless applications including passive components, phase shifters and antennas. Packaging and reliability of RF MEMS is also discussed. Chapters in part two focus on wireless techniques and applications of wireless MEMS including biomedical applications, such as implantable MEMS, intraocular pressure sensors and wireless drug delivery. Further chapters highlight the use of RF MEMS for automotive radar, the monitoring of telecommunications reliability using wireless MEMS and the use of optical MEMS displays in portable electronics.With its distinguished editor and international team of expert authors, the Handbook of MEMS for wireless and mobile applications is a technical resource for MEMS manufacturers, the electronics industry, and scientists, engineers and academics working on MEMS and wireless systems. - Reviews the use of radio frequency (RF) MEMS as an enabling technology for wireless applications - Discusses wireless techniques and applications of wireless MEMS, including biomedical applications - Describes monitoring structures and the environment with wireless MEMS

Download or read book Electronics for Microwave Backhaul written by Vittorio Camarchia and published by Artech House. This book was released on 2016-03-31 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely new resource presents an overview of the electronics of mobile network backhaul. Infrastructure planning, architecture evolution, digital controls, and countermeasures are all presented highlighting the building blocks of specific backhaul features. Tx and Rx design and antenna requirements and covered while examining the overall construction of the microwave radio hardware blocks. Single blocks are explored: the antenna, the analog transmitter and receiver, and the modem, recalling the most important aspects of transport networks and microwave link dimensioning. Essential theory is provided for each hardware block with an emphasis on present solutions. Authored by academic and industrial experts in the field, development and design engineers will benefit from the practical guidance in solving realistic issues and providing useful tips throughout the design process. This book guides readers through the historical evolution of microwave radios and the components of the next generation of mobile networks.

Download or read book Advanced Trends in Wireless Communications written by Mutamed Khatib and published by BoD – Books on Demand. This book was released on 2011-02-17 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical limitations on wireless communication channels impose huge challenges to reliable communication. Bandwidth limitations, propagation loss, noise and interference make the wireless channel a narrow pipe that does not readily accommodate rapid flow of data. Thus, researches aim to design systems that are suitable to operate in such channels, in order to have high performance quality of service. Also, the mobility of the communication systems requires further investigations to reduce the complexity and the power consumption of the receiver. This book aims to provide highlights of the current research in the field of wireless communications. The subjects discussed are very valuable to communication researchers rather than researchers in the wireless related areas. The book chapters cover a wide range of wireless communication topics.

Download or read book VLSI SoC Forward Looking Trends in IC and Systems Design written by Jose L. Ayala and published by Springer. This book was released on 2012-02-24 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains extended and revised versions of the best papers presented at the 18th IFIP WG 10.5/IEEE International Conference on Very Large Scale Integration, VLSI-SoC 2010, held in Madrid, Spain, in September 2010. The 14 papers included in the book were carefully reviewed and selected from the 52 full papers presented at the conference. The papers cover a wide variety of excellence in VLSI technology and advanced research. They address the current trend toward increasing chip integration and technology process advancements bringing about stimulating new challenges both at the physical and system-design levels, as well as in the test of theses systems.

Download or read book Elements of Radio Frequency Energy Harvesting and Wireless Power Transfer Systems written by Taimoor Khan and published by CRC Press. This book was released on 2020-11-12 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on elementary concepts of both radio frequency energy harvesting (RFEH) and wireless power transfer (WPT), and highlights their fundamental requirements followed by recent advancements. It provides a systematic overview of the key components required for RFEH and WPT applications and also comprehensively introduces the pioneering research advancements achieved to date. The state-of-the-art circuit design topologies for the two different applications are presented mainly in terms of antenna operating frequencies, polarization characteristics, efficient matching network circuits, rectifier topologies, and overall rectenna systems. The book serves as a single point of reference for practicing engineers and researchers searching for potential sources and elements involved in the RFEH system as well as in the WPT system, and need rapid training and design guidelines in the following areas: • Different sensing elements used in RFEH and WPT • Inclusions of mathematical expressions and design problems • Illustration of some design examples and performance enhancement techniques

Download or read book On Wafer Calibration Techniques Enabling Accurate Characterization of High Performance Silicon Devices at the mm Wave Range and Beyond written by Andrej Rumiantsev and published by CRC Press. This book was released on 2022-09-01 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand for more content, services, and security drives the development of high-speed wireless technologies, optical communication, automotive radar, imaging and sensing systems and many other mm-wave and THz applications. S-parameter measurement at mm-wave and sub-mm wave frequencies plays a crucial role in the modern IC design debug. Most importantly, however, is the step of device characterization for development and optimization of device model parameters for new technologies. Accurate characterization of the intrinsic device in its entire operation frequency range becomes extremely important and this task is very challenging. This book presents solutions for accurate mm-wave characterization of advanced semiconductor devices. It guides through the process of development, implementation and verification of the in-situ calibration methods optimized for high-performance silicon technologies. Technical topics discussed in the book include: Specifics of S-parameter measurements of planar structures Complete mathematical solution for lumped-standard based calibration methods, including the transfer Thru-Match-Reflect (TMR) algorithms Design guideline and examples for the on-wafer calibration standards realized in both advanced SiGe BiCMOS and RF CMOS processes Methods for verification of electrical characteristics of calibration standards and accuracy of the in-situ calibration results Comparison of the new technique vs. conventional approaches: the probe-tip calibration and the pad parasitic de-embedding for various device types, geometries and model parameters New aspects of the on-wafer RF measurements at mmWave frequency range and calibration assurance.

Download or read book Highly Integrated Low Power Radars written by Sergio Saponara and published by Artech House. This book was released on 2014-06-01 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, advances in radio detection and ranging technology, sustained by new achievements in the fields of signal processing and electronic components, have permitted the adoption of radars in many civil and defense applications. This resource discusses how highly integrated radar has been adopted by several new markets such as contactless vital sign monitoring (heart rate, breath rate) or harbour traffic control, as well as several applications for vehicle driver assistance. You are provided with scenarios, applications, and requirements, while focusing on the trade-offs between flexibility, programmability, power consumption, size and weight, and complexity.

Download or read book Selected Proceedings from the 232nd ECS Meeting National Harbor MD Fall 2017 written by Abbott and published by The Electrochemical Society. This book was released on 2017-12-22 with total page 1616 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book SiGe based Re engineering of Electronic Warfare Subsystems written by Wynand Lambrechts and published by Springer. This book was released on 2016-10-19 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers a thorough understanding of the applicability of new-generation silicon-germanium (SiGe) electronic subsystems for electronic warfare and defensive countermeasures in military contexts. It explains in detail the theoretical and technical background, and addresses all aspects of the integration of SiGe as an enabling technology for maritime, land, and airborne / spaceborne electronic warfare, including research, design, development, and implementation. The coverage is supported by mathematical derivations, informative illustrations, practical examples, and case studies. While SiGe technology provides speed, performance, and price advantages in many markets, to date only limited information has been available on its use in electronic warfare systems, especially in developing nations. Addressing that need, this book offers essential engineering guidelines that especially focus on the speed and reliability of current-generation SiGe circuits and highlight emerging innovations that help to ensure the sustainable long-term integration of SiGe into electronic warfare systems.

Download or read book Gallium Nitride GaN written by Farid Medjdoub and published by CRC Press. This book was released on 2017-12-19 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses a Growing Need for High-Power and High-Frequency Transistors Gallium Nitride (GaN): Physics, Devices, and Technology offers a balanced perspective on the state of the art in gallium nitride technology. A semiconductor commonly used in bright light-emitting diodes, GaN can serve as a great alternative to existing devices used in microelectronics. It has a wide band gap and high electron mobility that gives it special properties for applications in optoelectronic, high-power, and high-frequency devices, and because of its high off-state breakdown strength combined with excellent on-state channel conductivity, GaN is an ideal candidate for switching power transistors. Explores Recent Progress in High-Frequency GaN Technology Written by a panel of academic and industry experts from around the globe, this book reviews the advantages of GaN-based material systems suitable for high-frequency, high-power applications. It provides an overview of the semiconductor environment, outlines the fundamental device physics of GaN, and describes GaN materials and device structures that are needed for the next stage of microelectronics and optoelectronics. The book details the development of radio frequency (RF) semiconductor devices and circuits, considers the current challenges that the industry now faces, and examines future trends. In addition, the authors: Propose a design in which multiple LED stacks can be connected in a series using interband tunnel junction (TJ) interconnects Examine GaN technology while in its early stages of high-volume deployment in commercial and military products Consider the potential use of both sunlight and hydrogen as promising and prominent energy sources for this technology Introduce two unique methods, PEC oxidation and vapor cooling condensation methods, for the deposition of high-quality oxide layers A single-source reference for students and professionals, Gallium Nitride (GaN): Physics, Devices, and Technology provides an overall assessment of the semiconductor environment, discusses the potential use of GaN-based technology for RF semiconductor devices, and highlights the current and emerging applications of GaN.

Download or read book VLSI Design and Test written by Ambika Prasad Shah and published by Springer Nature. This book was released on 2022-12-16 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 26th International Symposium on VLSI Design and Test, VDAT 2022, which took place in Jammu, India, in July 2022. The 32 regular papers and 16 short papers presented in this volume were carefully reviewed and selected from 220 submissions. They were organized in topical sections as follows: Devices and Technology; Sensors; Analog/Mixed Signal; Digital Design; Emerging Technologies and Memory; System Design.

Download or read book Microwave De embedding written by Ernesto Limiti and published by Elsevier Inc. Chapters. This book was released on 2013-11-09 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of topics is presented related to noise characterization and modeling of linear, active devices for microwave applications, as well as to advanced methodologies for low-noise design. A complete description of the most common noise measurement techniques, namely the Y-factor method and the cold source method, are provided, with particular attention being paid to practical aspects such as de-embedding the measurement at the device under test reference planes, possible sources of error, and uncertainty estimation. Noise modeling is approached from a well-established standpoint, based on the extraction of a small-signal equivalent circuit model; but also source pull-based techniques—both standard and advanced ones—are broadly illustrated. Finally, a comprehensive discussion on design of single- and multistage low-noise amplifiers is proposed, ranging from the most classical tools and methodologies, such as constant-gain and constant-noise circles, to novel graphical tools and more advanced concepts, such as global mismatch limits and noise measure.