Download or read book Chemical Process Design written by Alexandre C. Dimian and published by John Wiley & Sons. This book was released on 2008-04-09 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical how-to-do book deals with the design of sustainable chemical processes by means of systematic methods aided by computer simulation. Ample case studies illustrate generic creative issues, as well as the efficient use of simulation techniques, with each one standing for an important issue taken from practice. The didactic approach guides readers from basic knowledge to mastering complex flow-sheets, starting with chemistry and thermodynamics, via process synthesis, efficient use of energy and waste minimization, right up to plant-wide control and process dynamics. The simulation results are compared with flow-sheets and performance indices of actual industrial licensed processes, while the complete input data for all the case studies is also provided, allowing readers to reproduce the results with their own simulators. For everyone interested in the design of innovative chemical processes.

Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.

Download or read book Preliminary Chemical Engineering Plant Design written by W.D. Baasal and published by Springer. This book was released on 1989-11-30 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling and Simulation in Polymer Reaction Engineering written by Klaus-Dieter Hungenberg and published by John Wiley & Sons. This book was released on 2018-05-18 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing a unique, modular approach to modeling polymerization reactions, this useful book will enable practitioners - chemists and engineers alike - to set up and structure their own models for simulation software like Predici®, C++, MatLab® or others. The generic modules are exemplified for concrete situations for various reactor types and reaction mechanisms and allow readers to quickly find their own point of interest - a highly useful information source for polymer engineers and researchers in industry and academia.

Download or read book Microreaction Technology written by M. Matlosz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: IMRET 5 featured more than 80 oral and poster communications, covering the entire interdisciplinary field from design, production, modeling and characterization of microreactor devices to application of microstructured systems for production, energy and transportation, including many analytical and biological applications. A particularly strong topic was the investigation of the potential of microstructuring of reactors and systems components for process intensification. Perspectives of combining local, in situ, data acquisition with appropriate microstructuring of actuators and components within chemical and biological devices were explored in order to enhance process performance and facilitate process control.

Download or read book Biopolymers from Renewable Resources written by David L. Kaplan and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymers from Renewable Resources is a compilation of information on the diverse and useful polymers derived from agricultural, animal, and microbial sources. The volume provides insight into the diversity of polymers obtained directly from, or derived from, renewable resources. The beneficial aspects of utilizing polymers from renewable resources, when considering synthesis, pro cessing, disposal, biodegradability, and overall material life-cycle issues, suggests that this will continue to be an important and growing area of interest. The individual chapters provide information on synthesis, processing and properties for a variety of polyamides, polysaccharides, polyesters and polyphenols. The reader will have a single volume that provides a resource from which to gain initial insights into this diverse field and from which key references and contacts can be drawn. Aspects of biology, biotechnology, polymer synthesis, polymer processing and engineering, mechanical properties and biophysics are addressed to varying degrees for the specific biopolymers. The volume can be used as a reference book or as a teaching text. At the more practical level, the range of important materials derived from renewable resources is both extensive and impressive. Gels, additives, fibers, coatings and films are generated from a variety of the biopolymers reviewed in this volume. These polymers are used in commodity materials in our everyday lives, as well as in specialty products.

Download or read book Biodegradable Poly Lactic Acid written by Jie Ren and published by Springer Science & Business Media. This book was released on 2011-04-05 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Biodegradable Poly (Lactic Acid): Synthesis, Modification, Processing and Applications" describes the preparation, modification, processing, and the research and applications of biodegradable poly (lactic acid), which belong to the biomedical and environment-friendly materials. Highly illustrated, the book introduces systematically the synthesis, physical and chemical modifications, and the latest developments of research and applications of poly (lactic acid) in biomedical materials. The book is intended for researchers and graduate students in the fields of materials science and engineering, polymer science and engineering, biomedicine, chemistry, environmental sciences, textile science and engineering, package materials, and so on. Dr. Jie Ren is a professor at the Institute of Nano and Bio-Polymeric Materials, School of Material Science and Engineering, Tongji University, Shanghai, China.

Download or read book Production Quality Control and Clinical Applications of Radiosynovectomy Agents written by International Atomic Energy Agency and published by . This book was released on 2021-08-31 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: Therapeutic radiopharmaceuticals play a major role in today's nuclear medicine with a positive impact on the diagnosis and treatment of diseases. One area of application is radiation synovectomy (RSV).

Download or read book Additives for Coatings written by Johan Bieleman and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: No doubt: A perfect coating has to look brilliant! But other properties of coatings are also most important. Coatings have to be durable, tough and easily applicable. Additives are the key to success in achieving these characteristics, even though the amounts used in coating formulations are small. It is not trivial at all to select the best additives. In practice, many series of tests are often necessary, and the results do not explain, why a certain additive improves the quality of a coating and another one impairs the coating. This book is dedicated to developers and applicants of coatings working in research or production, and it is aimed at providing a manual for their daily work. It will answer the following questions: How do the most important groups of additives act? Which effects can be be achieved by their addition? Scientific theories are linked to practical applications. Emphasis is put on the optical aspects that are most important for the applications in practice. This book is a milestone in quality assurance in the complete field of coatings!

Download or read book Energetic Materials written by Ulrich Teipel and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporation of particular components with specialized properties allows one to tailor the end product's properties. For instance, the sensitivity, burning behavior, thermal or mechanical properties or stability of energetic materials can be affected and even controllably varied through incorporation of such ingredients. This book examines particle technologies as applied to energetic materials such as propellants and explosives, thus filling a void in the literature on this subject. Following an introduction covering general features of energetic materials, the first section of this book describes methods of manufacturing particulate energetic materials, including size reduction, crystallization, atomization, particle formation using supercritical fluids and microencapsulation, agglomeration phenomena, special considerations in mixing explosive particles and the production of nanoparticles. The second section discusses the characterization of particulate materials. Techniques and methods such as particle size analysis, morphology elucidation and the determination of chemical and thermal properties are presented. The wettability of powders and rheological behavior of suspensions and solids are also considered. Furthermore, methods of determining the performance of particular energetic materials are described. Each chapter deals with fundamentals and application possibilities of the various methods presented, with particular emphasis on issues applicable to particulate energetic materials. The book is thus equally relevant for chemists, physicists, material scientists, chemical and mechanical engineers and anyone interested or engaged in particle processing and characterization technologies.

Download or read book Polymer Composites Macro and Microcomposites written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2012-04-30 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first systematic reference on the topic with an emphasis on the characteristics and dimension of the reinforcement. This first of three volumes, authored by leading researchers in the field from academia, government, industry, as well as private research institutions around the globe, focuses on macro and micro composites. Clearly divided into three sections, the first offers an introduction to polymer composites, discussing the state of the art, new challenges, and opportunities of various polymer composite systems, as well as preparation and manufacturing techniques. The second part looks at macro systems, with an emphasis on fiber reinforced polymer composites, textile composites, and polymer hybrid composites. Likewise, the final section deals with micro systems, including micro particle reinforced polymer composites, the synthesis, surface modification and characterization of micro particulate fillers and flakes as well as filled polymer micro composites, plus applications and the recovery, recycling and life cycle analysis of synthetic polymeric composites.

Download or read book Metallopolymer Nanocomposites written by A.D. Pomogailo and published by Springer Science & Business Media. This book was released on 2006-01-27 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents and analyzes the essential data on nanoscale metal clusters dispersed in, or chemically bonded with polymers. Special attention is paid to the in situ synthesis of the nanocomposites, their chemical interactions, and the size and distribution of the particles in the polymer matrix. Numerous novel nanocomposites are described with regard to their mechanical, electrophysical, optical, magnetic, catalytic and biological properties. Their applications, present and future, are outlined.

Download or read book Integrated Chemical Processes written by Kai Sundmacher and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book dedicated to the entire field of integrated chemical processes, covering process design, analysis, operation and control of these processes. Both the editors and authors are internationally recognized experts from different fields in industry and academia, and their contributions describe all aspects of intelligent integrations of chemical reactions and physical unit operations such as heat exchange, separational operations and mechanical unit operations. As a unique feature, the book also introduces new concepts for treating different integration concepts on a generalized basis. Of great value to a broad audience of researchers and engineers from industry and academia.

Download or read book Chemical Mechanical Planarization of Semiconductor Materials written by M.R. Oliver and published by Springer Science & Business Media. This book was released on 2004-01-26 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a comprehensive review of CMP (Chemical-Mechanical Planarization) technology, one of the most exciting areas in the field of semiconductor technology. It contains detailed discussions of all aspects of the technology, for both dielectrics and metals. The state of polishing models and their relation to experimental results are covered. Polishing tools and consumables are also covered. The leading edge issues of damascene and new dielectrics as well as slurryless technology are discussed.

Download or read book Rules of Thumb in Engineering Practice written by Donald R. Woods and published by John Wiley & Sons. This book was released on 2007-06-27 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: An immense treasure trove containing hundreds of equipment symptoms, arranged so as to allow swift identification and elimination of the causes. These rules of thumb are the result of preserving and structuring the immense knowledge of experienced engineers collected and compiled by the author - an experienced engineer himself - into an invaluable book that helps younger engineers find their way from symptoms to causes. This sourcebook is unrivalled in its depth and breadth of coverage, listing five important aspects for each piece of equipment: * area of application * sizing guidelines * capital cost including difficult-to-find installation factors * principles of good practice, and * good approaches to troubleshooting. Extensive cross-referencing takes into account that some items of equipment are used for many different purposes, and covers not only the most familiar types, but special care has been taken to also include less common ones. Consistent terminology and SI units are used throughout the book, while a detailed index quickly and reliably directs readers, thus aiding engineers in their everyday work at chemical plants: from keywords to solutions in a matter of minutes.

Download or read book Centrifugal Materials Processing written by Liya L. Regel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is not good to have zeal without knowledge • . . . Book of Proverbs This volume constitutes the proceedings of the Third International Workshop on Materials Processing at High Gravity. It offers the latest results in a new field with immense potential for commercialization, making this book a vital resource for research and development professionals in industry, academia and government. We have titled the proceedings Centrifugal Materials Processing to emphasize that centrifugation causes more than an increase in acceleration. It also introduces the Coriolis force and a gradient of acceleration, both of which have been discovered to play important roles in materials processing. The workshop was held June 2-8, 1996 on the campus of Clarkson University in Potsdam, New York, under the sponsorship of Corning Corporation and the International Center for Gravity Materials Science and Applications. The meeting was very productive and exciting, with energetic discussions of the latest discoveries in centrifugal materials processing, continuing the atmosphere of the first workshop held in 1991 at Dubna (Russia) and the second workshop held in 1993 in Potsdam, New York. Results and research plans were presented for a wide variety of centrifugal materials processing, including directional solidification of semiconductors, crystallization of high Tc superconductors, growth of diamond thin films, welding, alloy casting, solution behavior and growth, protein crystal growth, polymerization, and flow behavior. Also described were several centrifuge facilities that have been constructed for research, with costs beginning at below $1000.

Download or read book Lubricating Grease Manufacturing Technology written by Yu.L. Ishchuk and published by New Age International. This book was released on 2005 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lubricating Grease (Or Grease, To Use A Short Name), Leaving Aside Synthetic Grease For The Moment, Is Arguably Amongst The Highest Value Added Petroleum Products. Lubricating Greases Play Very Crucial Role In The Performance Of Automobiles, Industrial Machinery And Appliances Which Almost Every One Of Us Use, Rely Upon Or Work With Everyday. Lubricating Greases Account For About 5% Of The Global Consumption Of The Lubricants, Which In Turn Account For About 1% Of All Petroleum Products. Thus, In Volume Terms, Lubricating Greases Constitute A Relatively Small, Specialized Industry. Nonetheless, The Importance Of Lubricating Greases Can Not Be Overemphasized. The World Would Quite Literally Grind To A Halt Without Lubricating Greases.There Are Not Many Books On Lubricating Greases. Even The Very Few Books That Are Available In English Language, Largely Encapsulate The Work And Knowledge Developed In North America And West Europe. Significant Scientific And Technological Advancements Were Achieved In The Erstwhile East Bloc Countries During The Second Half Of The 20Th Century. However, It Is Only Over The Last Two Decades That Those Outside The Erstwhile East Bloc Have Been Getting Glimpses Of The Prolific Work Done By Scientists And Technologists In That Part Of The World. This Book Endeavours To Further This Process In A Small Way.