Download or read book Ethylene Production via Steam Cracking of Naphtha Cost Analysis Ethylene E72B written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from light naphtha feedstock using a typical steam cracking process. In this process, naphtha is thermally cracked at low severity conditions, maximizing propylene to Ethylene ratio. In addition to PG Ethylene and PG propylene, the process also generates pygas and a mixed C4s stream as by-products. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Propene, Pyrolysis Gasoline, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Ethylene Production via Steam Cracking of Naphtha Cost Analysis Ethylene E71B written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from light naphtha feedstock using a typical steam cracking process In this process, naphtha is thermally cracked in pyrolysis furnaces at high severity conditions to maximize Ethylene yield. In addition to Ethylene, the process also generates polymer grade propylene, pygas and a mixed C4s stream as by-products. Products separation follows a front-end demethanization sequence. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Propene, Pyrolysis Gasoline, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Ethylene Production via Steam Cracking of Naphtha Cost Analysis Ethylene E72A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from light naphtha feedstock using a typical steam cracking process. In this process, naphtha is thermally cracked at low severity conditions, maximizing propylene to Ethylene ratio. Besides PG Ethylene and PG propylene, the process also generates pygas and a mixed C4s stream as by-products. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Propene, Pyrolysis Gasoline, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Ethylene Production via Steam Cracking of Ethane Cost Analysis Ethylene E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from ethane feedstock using a typical steam cracking process. In this process, ethane is thermally cracked in pyrolysis furnaces through the use of steam. In addition to polymer grade Ethylene, the process also generates a methane-rich gas (used as fuel in the cracking furnaces) and hydrogen-rich gas, sold as by-product. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Ethylene Production Cost Analysis Overview Ethylene AA01 written by Intratec and published by Intratec. This book was released on 2016-03-01 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents alternatives for producing Ethylene from different feedstocks and a cost comparison of these alternatives, across different countries. More specifically, the report compares the costs of Ethylene production through the following pathways: * Pathway 1: Ethylene Production from Ethane * Pathway 2: Ethylene Production from Ethane and Propane * Pathway 3: Green Ethylene Production from Ethanol In Pathways 1 and 2, Ethylene is produced via steam cracking of different feedstocks: ethane and a mixture of ethane and propane. In Pathway 3, Ethylene is produced from ethanol, which is a renewable feedstock. The analysis presented in this report includes: * A comparison of the economic potential of the pathways listed above in several countries, comprising: - Comparative analysis of capital costs - Comparative analysis of production costs - Comparison between product price and raw materials costs of each pathway * An overview of each production pathway, including: - Raw material(s) consumption figures and product(s) generated - Related technology licensors and block flow diagram of representative industrial processes Keywords: Hydrocarbon Pyrolysis, Cracking Furnace, Ethene, Propene, Shale Gas, CB&I Lummus, Technip, Shaw Stone & Webster, Kellogg-Braun & Root, KBR, Linde, Green Ethylene, Braskem, Chematur Technologies, Petron Scientech, Scientific Design, Dow Chemical, BP, Ethanol Dehydration
Download or read book Ethylene Production via Cracking of Ethane Propane Cost Analysis Ethylene E21A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production starting from an ethane/propane mixture at a volume ratio of 4:1 A typical steam cracking process with front-end demethanization is employed. In this process, a mix of 80 vol% ethane and 20 vol% propane is thermally cracked in pyrolysis furnaces. In addition to polymer grade Ethylene, the process also generates polymer grade propylene and hydrogen-rich gas. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Propene, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Propylene Production Cost Analysis Overview Propylene AA01 written by Intratec Solutions and published by . This book was released on 2016-03 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents alternatives for producing PG Propylene from different feedstocks and a cost comparison of these alternatives, across different countries. More specifically, the report compares the costs of PG Propylene production through the following pathways:* Pathway 1: Propylene Production from Light Naphtha* Pathway 2: Propylene Production from Ethylene and Butenes* Pathway 3: Propylene Production from Propane (with Hydrogen Generation)Pathway 1 corresponds to a steam cracker for Propylene production (ethylene as co-product). In Pathway 2, Propylene is produced via metathesis reaction of ethylene with 2-butene (present in raffinate-2 feedstock). In Pathway 3, propane is dehydrogenated to Propylene with hydrogen generated being valued as fuel. The analysis presented in this report includes:* A comparison of the economic potential of the pathways listed above in several countries, comprising: * Comparative analysis of capital costs * Comparative analysis of production costs * Comparison between product price and raw materials costs of each pathway * An overview of each production pathway, including: * Raw material(s) consumption figures and product(s) generated * Related technology licensors and block flow diagram of representative industrial processes Keywords: Propene, Ethene, Steam Cracking, PDH, Propane Dehydrogenation, Olefins Conversion Technology, OCT
Download or read book Ethylene Production via Steam Cracking of Propane Cost Analysis Ethylene E31A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from propane feedstock using a typical steam cracking process. In this process, propane is thermally cracked in pyrolysis furnaces through the use of steam. In addition to Ethylene, the process also generates polymer grade propylene, pygas and a crude C4s stream as by-products. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Propene, Pyrolysis Gasoline, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Ethylene Production via Steam Cracking of n Butane Cost Analysis Ethylene E41A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from n-butane feedstock using a typical steam cracking process In this process, n-butane is thermally cracked in pyrolysis furnaces through the use of steam. In addition to Ethylene, the process also generates polymer grade propylene, butadiene. Raffinate-1 and pygas as by-products. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Propene, Pyrolysis Gasoline, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Ethylene Production via Steam Cracking of Isobutane Cost Analysis Ethylene E51A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from isobutane feedstock using a typical steam cracking process. In this process, isobutane is thermally cracked in pyrolysis furnaces through the use of steam. In addition to Ethylene, the process also generates polymer grade propylene, butadiene , raffinate-1 and pygas as by-products. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Propene, Pyrolysis Gasoline, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Propylene from Naphtha via Steam Cracking Cost Analysis Propylene E71B written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polymer Grade (PG) Propylene production from light naphtha feedstock using a typical steam cracking process. In this process, naphtha is thermally cracked at low severity conditions, maximizing Propylene to ethylene ratio. Besides PG Propylene and PG ethylene, the process also generates pygas and a mixed C4s stream as by-products. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Propene, Pyrolysis Gasoline, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Ethylene Production Cost Analysis Overview Ethylene AA01 written by Intratec Solutions and published by . This book was released on 2016-03 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents alternatives for producing Ethylene from different feedstocks and a cost comparison of these alternatives, across different countries. More specifically, the report compares the costs of Ethylene production through the following pathways:* Pathway 1: Ethylene Production from Ethane* Pathway 2: Ethylene Production from Ethane and Propane* Pathway 3: Green Ethylene Production from EthanolIn Pathways 1 and 2, Ethylene is produced via steam cracking of different feedstocks: ethane and a mixture of ethane and propane. In Pathway 3, Ethylene is produced from ethanol, which is a renewable feedstock.The analysis presented in this report includes:* A comparison of the economic potential of the pathways listed above in several countries, comprising: * Comparative analysis of capital costs * Comparative analysis of production costs * Comparison between product price and raw materials costs of each pathway * An overview of each production pathway, including: * Raw material(s) consumption figures and product(s) generated * Related technology licensors and block flow diagram of representative industrial processes Keywords: Hydrocarbon Pyrolysis, Cracking Furnace, Ethene, Propene, Shale Gas, CB&I Lummus, Technip, Shaw Stone & Webster, Kellogg-Braun & Root, KBR, Linde, Green Ethylene, Braskem, Chematur Technologies, Petron Scientech, Scientific Design, Dow Chemical, BP, Ethanol Dehydration
Download or read book Ethylene Production via Ethanol Dehydration Cost Analysis Ethylene E82A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from hydrous ethanol using a dehydration process. The process under analysis is similar to the processes developed by Chematur and Petron. In this process, the reaction system is composed of multiple reactors in series and a single furnace. The system uses ethanol as heating fluid, with no injection of additional steam. This report was developed based essentially on the following reference(s): (1) Chematur Engineering AB, "Ethylene from Ethanol" (2) US Patent 20130178674, issued to Petron in 2013 Keywords: Ethene, Ethyl Alcohol, Vapor-Phase Dehydration, Fixed-Bed Reactor, Renewable Feedstock, Green Ethylene
Download or read book Ethylene Production from Vacuum Gas Oil Cost Analysis Ethylene E01C written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from vacuum gas oil (VGO) using a typical steam cracking process. In this process, VGO is thermally cracked in pyrolysis furnaces through the use of steam. In addition to Ethylene, the process also generates polymer grade propylene, pygas and a mixed C4s stream as by-products. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Propene, Pyrolysis Gasoline, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book Technology Economics Ethylene Production Via Ethanol Dehydration written by Intratec and published by Intratec Solutions. This book was released on 2013-07-04 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ethylene is most frequently produced from petroleum-based feedstock. However, rising oil prices coupled with global concerns about sustainability and global warming have motivated research into ethylene manufacture from renewable sources. Fermentation-derived ethanol has been increasingly used as raw material for renewable ethylene production, presenting the primary advantage of being made from CO2 removed from the atmosphere. The technical aspects of a process to produce ethylene via ethanol dehydration are reviewed, as well as the key economic parameters for the profitability of an ethanol dehydration plant. This study follows the same pattern as all Technology Economics studies developed by Intratec. About Technology Economics Technology Economics studies are advisory services ordered by leading chemical companies, which are disclosed to public if they allow so. All Technology Economics studies are based on the same rigorous methodology and well-defined structure, encompassing: Process flow diagrams and material balances Raw material and utility consumptions Major equipment sizing Inside and outside battery limits capital costs Detailed fixed and variable manufacturing expenses
Download or read book Ethylene Production from Atmospheric Gas Oil Cost Analysis Ethylene E61C written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of polymer grade (PG) Ethylene production from atmospheric gas oil (AGO) using a typical steam cracking process. In this process, AGO is thermally cracked in pyrolysis furnaces through the use of steam. In addition to Ethylene, the process also generates polymer grade propylene, pygas and fuel oil as by-products. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Propene, Pyrolysis Gasoline, Hydrocarbon Pyrolysis, Cracking Furnace, Lummus, KBR, Technip, Linde, S&W
Download or read book PG Ethylene Production from Ethylene Rich Gas Cost Analysis Ethylene EC1A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Polymer Grade (PG) Ethylene production from an ethylene-rich stream obtained from a typical steam cracking plant, which uses ethane as feedstock. The process examined comprises the separation of ethylene from dried cracked gas, including the following steps: C3+ hydrocarbons separation; acetylene hydrogenation; light ends separation; and ethylene fractionation. In addition to polymer grade Ethylene, the process also generates a hydrogen-rich gas, sold as by-product. This report was developed based essentially on the following reference(s): "Ethylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Ethene, Deethanizer, Ethane-Ethylene Splitter, C2 Splitter, Lummus, KBR, Technip, Linde, S&W