Download or read book Ethylbenzene Production from Benzene and Ethylene Cost Analysis EB E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Ethylbenzene (EB) production from benzene and polymer grade (PG) ethylene. The process examined is a typical liquid-phase alkylation process using zeolite catalyst. This report was developed based essentially on the following reference(s): Keywords: Ethylbenzene, Ethylene, Benzene, Alkylation, CB&I Lummus/UOP EB One, ExxonMobil/Badger EB Max, Polimeri Europa, Zeolite
Download or read book Ethylbenzene Production from Benzene and Ethylene Cost Analysis EB E12A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Ethylbenzene (EB) production from benzene and dilute ethylene. The process examined is a catalytic distillation (CD) process similar to CDTECH EB technology. In this process, benzene is alkylated with ethylene present in dilute ethylene feedstock (about 20 mol %) to form Ethylbenzene. This report was developed based essentially on the following reference(s): Keywords: Ethylbenzene, Ethylene, Benzene, Alkylation, CB&I Lummus, CDTECH EB, Catalytic Distillation
Download or read book Ethylbenzene Production from Benzene and Ethylene Cost Analysis EB E13A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Ethylbenzene (EB) production from benzene and polymer grade (PG) ethylene. The process examined is a conventional liquid-phase alkylation process using Aluminum chloride catalyst. This report was developed based essentially on the following reference(s): Keywords: Ethylbenzene, Ethylene, Benzene, Alkylation, AlCl3, EB
Download or read book Mechanical Properties of Solid Polymers written by I. M. Ward and published by . This book was released on 1983-06-27 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise, self-contained introduction to solid polymers, the mechanics of their behavior and molecular and structural interpretations. This updated edition provides extended coverage of recent developments in rubber elasticity, relaxation transitions, non-linear viscoelastic behavior, anisotropic mechanical behavior, yield behavior of polymers, breaking phenomena, and other fields.
Download or read book Handbook of Biomaterial Properties written by William Murphy and published by Springer. This book was released on 2016-06-11 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides tabular and text data relating to normal and diseased tissue materials and materials used in medical devices. Comprehensive and practical for students, researchers, engineers, and practicing physicians who use implants, this book considers the materials aspects of both implantable materials and natural tissues and fluids. Examples of materials and topics covered include titanium, elastomers, degradable biomaterials, composites, scaffold materials for tissue engineering, dental implants, sterilization effects on material properties, metallic alloys, and much more. Each chapter author considers the intrinsic and interactive properties of biomaterials, as well as their appropriate applications and historical contexts. Now in an updated second edition, this book also contains two new chapters on the cornea and on vocal folds, as well as updated insights, data, and citations for several chapters.
Download or read book An Introduction to the Mechanical Properties of Solid Polymers written by I. M. Ward and published by John Wiley & Sons. This book was released on 2005-08-19 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive introduction to the mechanical behaviour of solid polymers. Extensively revised and updated throughout, the second edition now includes new material on mechanical relaxations and anisotropy, composites modelling, non-linear viscoelasticity, yield behaviour and fracture of tough polymers. The accessible approach of the book has been retained with each chapter designed to be self contained and the theory and applications of the subject carefully introduced where appropriate. The latest developments in the field are included alongside worked examples, mathematical appendices and an extensive reference. Fully revised and updated throughout to include all the latest developments in the field Worked examples at the end of the chapter An invaluable resource for students of materials science, chemistry, physics or engineering studying polymer science
Download or read book Proceedings of the International Petroleum and Petrochemical Technology Conference 2019 written by Jia'en Lin and published by Springer Nature. This book was released on 2019-12-16 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of selected papers from the 3rd International Petroleum and Petrochemical Technology Conference (IPPTC 2019). The work focuses on petroleum & petrochemical technologies and practical challenges in the field. It creates a platform to bridge the knowledge gap between China and the world. The conference not only provides a platform to exchanges experience but also promotes the development of scientific research in petroleum & petrochemical technologies. The book will benefit a broad readership, including industry experts, researchers, educators, senior engineers and managers.
Download or read book Composite Materials written by Kamal K. Kar and published by Springer. This book was released on 2016-10-14 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.
Download or read book Clay Polymer Nanocomposites written by Khouloud Jlassi and published by Elsevier. This book was released on 2017-07-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay–Polymer Nanocomposites is a complete summary of the existing knowledge on this topic, from the basic concepts of synthesis and design to their applications in timely topics such as high-performance composites, environment, and energy issues. This book covers many aspects of synthesis such as in- situ polymerization within the interlamellar spacing of the clays or by reaction of pristine or pre-modified clays with reactive polymers and prepolymers. Indeed, nanocomposites can be prepared at industrial scale by melt mixing. Regardless the synthesis method, much is said in this book about the importance of theclay pre-modification step, which is demonstrated to be effective, on many occasions, in obtaining exfoliated nanocomposites. Clay–Polymer Nanocomposites reports the background to numerous characterization methods including solid state NMR, neutron scattering, diffraction and vibrational techniques as well as surface analytical methods, namely XPS, inverse gas chromatography and nitrogen adsorption to probe surface composition, wetting and textural/structural properties. Although not described in dedicated chapters, numerous X-ray diffraction patterns of clay–polymer nanocomposites and reference materials are displayed to account for the effects of intercalation and exfoliations of layered aluminosilicates. Finally, multiscale molecular simulation protocols are presenting for predicting morphologies and properties of nanostructured polymer systems with industrial relevance. As far as applications are concerned, Clay–Polymer Nanocomposites examines structural composites such as clay–epoxy and clay–biopolymers, the use of clay–polymer nanocomposites as reactive nanocomposite fillers, catalytic clay-(conductive) polymers and similar nanocomposites for the uptake of hazardous compounds or for controlled drug release, antibacterial applications, energy storage, and more. The most comprehensive coverage of the state of the art in clay–polymer nanocomposites, from synthesis and design to opportunities and applications Covers the various methods of characterization of clay–polymer nanocomposites - including spectroscopy, thermal analyses, and X-ray diffraction Includes a discussion of a range of application areas, including biomedicine, energy storage, biofouling resistance, and more
Download or read book Long Term Durability of Polymeric Matrix Composites written by Kishore V. Pochiraju and published by Springer Science & Business Media. This book was released on 2011-09-25 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: Long-Term Durability of Polymeric Matrix Composites presents a comprehensive knowledge-set of matrix, fiber and interphase behavior under long-term aging conditions, theoretical modeling and experimental methods. This book covers long-term constituent behavior, predictive methodologies, experimental validation and design practice. Readers will also find a discussion of various applications, including aging air craft structures, aging civil infrastructure, in addition to engines and high temperature applications.
Download or read book Carbon Fibers written by Soo-Jin Park and published by Springer. This book was released on 2014-10-08 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains eight chapters that discuss the manufacturing methods, surface treatment, composite interfaces, microstructure-property relationships with underlying fundamental physical and mechanical principles, and applications of carbon fibers and their composites. Recently, carbon-based materials have received much attention for their many potential applications. The carbon fibers are very strong, stiff, and lightweight, enabling the carbon materials to deliver improved performance in several applications such as aerospace, sports, automotive, wind energy, oil and gas, infrastructure, defense, and semiconductors. However, the use of carbon fibers in cost-sensitive, high-volume industrial applications is limited because of their relatively high costs. However, its production is expected to increase because of its widespread use in high-volume industrial applications; therefore, the methods used for manufacturing carbon fibers and carbon-fiber-reinforced composites and their structures and characteristics need to be investigated.
Download or read book Toughened Plastics written by C. Bucknall and published by Springer. This book was released on 2013-12-19 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Materials written by Krishan K. Chawla and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the relationship between structure and properties, this is a well-balanced treatment of the mechanics and the materials science of composites, while not neglecting the importance of processing. This updated second edition contains new chapters on fatigue and creep of composites, and describes in detail how the various reinforcements, the materials in which they are embedded, and of the interfaces between them, control the properties of the composite materials at both the micro- and macro-levels. Extensive use is made of micrographs and line drawings, and examples of practical applications in various fields are given throughout the book, together with extensive references to the literature. Intended for use in graduate and upper-division undergraduate courses, this book will also prove a useful reference for practising engineers and researchers in industry and academia.
Download or read book Carbon Fibers and Their Composite Materials written by Luke Henderson and published by MDPI. This book was released on 2019-07-16 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon fiber is an oft-referenced material that serves as a means to remove mass from large transport infrastructure. Carbon fiber composites, typically plastics reinforced with the carbon fibers, are key materials in the 21st century and have already had a significant impact on reducing CO2 emissions. Though, as with any composite material, the interface where each component meets, in this case the fiber and plastic, is critical to the overall performance. This text summarizes recent efforts to manipulate and optimize the interfacial interaction between these dissimilar materials to improve overall performance.
Download or read book EPA 454 F written by and published by . This book was released on 1998-12 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development of the Cerebellum from Molecular Aspects to Diseases written by Hassan Marzban and published by Springer. This book was released on 2017-07-27 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors present the most current and cutting-edge knowledge regarding the molecular basis of cerebellar development, focusing on information relevant to laboratory scientists and clinicians providing service to patients with cerebellar disorders. Knowledge obtained from advanced neuroimaging techniques that are used during development, and from molecular- and genetic-based studies has provided rapidly-growing evidence that the cerebellum is a brain region that is highly impacted by developmental defects. Cerebellar defects result in significant intellectual and motor function impairment that affects both the patients and their families.
Download or read book BioMEMS and Biomedical Nanotechnology written by Mihrimah Ozkan and published by Springer Science & Business Media. This book was released on 2007-04-03 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributions reporting on fundamental and applied investigations of the material science, biochemistry, and physics of biomedical microdevices with applications to Genomics and Proteomics. Topics include gene expression profiling utilizing microarray technology; imaging and sensing for gene detection and use in DNA analysis; and coverage of advanced microfluidic devices and the Humane Genome Project.