Download or read book Understanding the Marginal Seas of Northeast Asia for Tectonics and Submarine Geohazards written by Kwang-Hee Kim and published by Frontiers Media SA. This book was released on 2022-08-29 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shear Waves in Marine Sediments written by J.M Hovem and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shear waves and closely related interface waves (Rayleigh, Stoneley and Scholte) play an important role in many areas of engineering, geophysics and underwater acoustics. In some cases interest is focused on large-amplitude waves of low frequency such as those associ ated with earthquakes and nuclear explosions; in other cases low amplitude waves, which have often travelled great distances through the sediment, are of interest. Both low and high frequency shear and interface waves are often used for seafloor probing and sediment characterization. As a result of the wide spectrum of different interests, different disciplines have developed lines of research and a literature particularly suited to their own problems. For example water-column acousticians view the seafloor sediment as the lower boundary of their domain and are interested in shear and interface waves in the near bottom sediments mainly from the standpoint of how they influence absorption and reflection at this boundary. On the other hand, geophysicists seeking deep oil deposits are interested in the maximum penetration into the sediments and the tell-tale characteristics of the seismic waves that have encountered potential oil or gas bearing strata. In another area, geotechnical engineers use shear and interface waves to study soil properties necessary for the design and the siting of seafloor structures.
Download or read book Seismic Surface Waves in a Laterally Inhomogeneous Earth written by V.I. Keilis-Borok and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface waves form the longest and strongest portion of a seismic record excited by explosions and shallow earthquakes. Traversing areas with diverse geologic structures, they 'absorb' information on the properties of these areas which is best retlected in dispersion, the dependence of velocity on frequency. The other prop erties of these waves - polarization, frequency content, attenuation, azimuthal variation of the amplitude and phase - arc also controlled by the medium between the source and the recording station; some of these are affected by the properties of the source itself and by the conditions around it. In recent years surface wave seismology has become an indispensable part of seismological practice. The maximum amplitude in the surface wave train of virtually every earthquake or major explosion is being measured and used by all national and international seismological surveys in the determination of the most important energy parameter of a seismic source, namely, the magnitude M,. The relationship between M, and the body wave magnitude fI1t, is routinely employed in identification of underground nuclear explosions. Surface waves of hundreds of earthquakes recorded every year are being analysed to estimate the seismic moment tensor of earthquake sources, to determine the periods of free oscillations of the Earth, to construct regional dispersion curves from which in turn the crustal and upper mantle structure in various areas is derived, and to evaluate the dissipative parameters of the mantle material.
Download or read book Bottom Interacting Ocean Acoustics written by William A. Kuperman and published by Springer. This book was released on 2012-06-15 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: vi These categories seem to represent the basic breakdown by field of present-day research in this area. Though each paper has been classified into one of these categories (for conference organization purpose), many papers overlapped two or three areas. It is also interesting to note that not only are scientific results being communicated, but the latest techniques and the state-of-the-art tools of the trade (existing and in development) are also being presented. The forty-six papers presented at this conference represent the work of seventy scientists working at universities, government laboratories, and industrial laboratories in seven different countries . We would like to thank the contributors for their efforts and especially for their promptness in providing the editors with their final manuscripts. William A. Kuperman Finn B. Jensen La Spezia, Italy July 1980 CONTENTS GEOACOUSTIC PROPERTIES OF MARINE SEDIMENTS Attenuation of Sound in Marine Sediments . • 1 J. M. Hovem Directivity and Radiation Impedance of a Transducer 15 Embedded in a Lossy Medium . •• •••••• G. H. Ziehm Elastic Properties Related to Depth of Burial, Strontium Content and Age, and Diagenetic Stage in Pelagic Carbonate Sediments . . • • . • • • . 41 M. H. Manghnani, S. O. Schianger, and P. D. Milholland Application of Geophysical Methods 'and Equipment to Explore the Sea Bottom . •• •••. • 53 H. F. Weichart The Acoustic Response of Some Gas-Charged Sediments in the Northern Adriatic Sea • • • • . • • • • 73 A.
Download or read book Near Surface Applied Geophysics written by Mark E. Everett and published by Cambridge University Press. This book was released on 2013-04-25 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: A refreshing, up-to-date exploration of the latest developments in near-surface techniques, for advanced-undergraduate and graduate students, and professionals.
Download or read book The Microtremor Survey Method written by Hiroshi Okada and published by SEG Books. This book was released on 2003 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the nature of the microtremor noise field, the use of appropriate surface arrays of geophones, and the two principal classes of array-processing techniques, high-resolution beamforming and the spatial autocorrelation method (SPAC). This is the first comprehensive textbook of the microtremor survey method written in English.
Download or read book Fundamentals of Ocean Acoustics written by L. Brekhovskikh and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continents of our planet have already been exploited to a great extent. Therefore man is turning his sight to the vast spaciousness of the ocean whose resources - mineral, biological, energetic, and others - are just beginning to be used. The ocean is being intensively studied. Our notions about the dynam ics of ocean waters and their role in forming the Earth's climate as well as about the structure of the ocean bottom have substantially changed during the last two decades. An outstanding part in this accelerated exploration of the ocean is played by ocean acoustics. Only sound waves can propagate in water over large distances. Practically all kinds of telemetry, communication, location, and re mote sensing of water masses and the ocean bottom use sound waves. Propa gating over thousands of kilometers in the ocean, they bring information on earthquakes, eruptions of volcanoes, and distant storms. Projects using acoustical tomography systems for exploration of the ocean are presently be ing developed. Each of these systems will allow us to determine the three-di mensional structure of water masses in regions as large as millions of square kilometers.
Download or read book Surface Wave Analysis for Near Surface Applications written by Giancarlo Dal Moro and published by Elsevier. This book was released on 2014-11-04 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Wave Analysis for Near Surface Applications presents the foundational tools necessary to properly analyze surface waves acquired according to both active and passive techniques. Applications range from seismic hazard studies, geotechnical surveys and the exploration of extra-terrestrial bodies. Surface waves have become critical to near-surface geophysics both for geotechnical goals and seismic-hazard studies. Included in this book are the related theories, approaches and applications which the lead editor has assembled from a range of authored contributions carefully selected from the latest developments in research. A unique blend of theory and practice, the book's concepts are based on exhaustive field research conducted over the past decade from the world's leading seismologists and geophysicists. - Edited by a geophysicist with nearly 20 years of experience in research, consulting, and geoscience software development - Nearly 100 figures, photographs, and examples aid in the understanding of fundamental concepts and techniques - Presents the latest research in seismic wave characteristics and analysis, the fundamentals of signal processing, wave data acquisition and inversion, and the latest developments in horizontal-to-vertical spectral ratio (HVSR) - Each chapter features a real-world case study—13 in all—to bring the book's key principles to life
Download or read book Fundamentals of Seismic Wave Propagation written by Chris Chapman and published by Cambridge University Press. This book was released on 2004-07-29 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Seismic Wave Propagation, published in 2004, presents a comprehensive introduction to the propagation of high-frequency body-waves in elastodynamics. The theory of seismic wave propagation in acoustic, elastic and anisotropic media is developed to allow seismic waves to be modelled in complex, realistic three-dimensional Earth models. This book provides a consistent and thorough development of modelling methods widely used in elastic wave propagation ranging from the whole Earth, through regional and crustal seismology, exploration seismics to borehole seismics, sonics and ultrasonics. Particular emphasis is placed on developing a consistent notation and approach throughout, which highlights similarities and allows more complicated methods and extensions to be developed without difficulty. This book is intended as a text for graduate courses in theoretical seismology, and as a reference for all academic and industrial seismologists using numerical modelling methods. Exercises and suggestions for further reading are included in each chapter.
Download or read book Surface Wave Methods for Near Surface Site Characterization written by Sebastiano Foti and published by CRC Press. This book was released on 2014-08-21 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develop a Greater Understanding of How and Why Surface Wave Testing Works Using examples and case studies directly drawn from the authors’ experience, Surface Wave Methods for Near-Surface Site Characterization addresses both the experimental and theoretical aspects of surface wave propagation in both forward and inverse modeling. This book accents the key facets associated with surface wave testing for near-surface site characterization. It clearly outlines the basic principles, the theoretical framework and the practical implementation of surface wave analysis. In addition, it also describes in detail the equipment and measuring devices, acquisition techniques, signal processing, forward and inverse modeling theories, and testing protocols that form the basis of modern surface wave techniques. Review Examples of Typical Applications for This Geophysical Technique Divided into eight chapters, the book explains surface wave testing principles from data measurement to interpretation. It effectively integrates several examples and case studies illustrating how different ground conditions and geological settings may influence the interpretation of data measurements. The authors accurately describe each phase of testing in addition to the guidelines for correctly performing and interpreting results. They present variants of the test within a consistent framework to facilitate comparisons, and include an in-depth discussion of the uncertainties arising at each stage of surface wave testing. Provides a comprehensive and in-depth treatment of all the steps involved in surface wave testing Discusses surface wave methods and their applications in various geotechnical conditions and geological settings Explains how surface wave measurements can be used to estimate both stiffness and dissipative properties of the ground Addresses the issue of uncertainty, which is often an overlooked problem in surface wave testing Includes examples with comparative analysis using different processing techniques and inversion algorithms Outlines advanced applications of surface wave testing such as joint inversion, underwater investigation, and Love wave analysis Written for geotechnical engineers, engineering seismologists, geophysicists, and researchers, Surface Wave Methods for Near-Surface Site Characterization offers practical guidance, and presents a thorough understanding of the basic concepts.
Download or read book Underwater Acoustic Data Processing written by Y. T. Chan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers that were accepted for presentation at the 1988 NATO Advanced Study Institute on Underwater Acoustic Data Processing, held at the Royal Military College of Canada from 18 to 29 July, 1988. Approximately 110 participants from various NATO countries were in attendance during this two week period. Their research interests range from underwater acoustics to signal processing and computer science; some are renowned scientists and some are recent Ph.D. graduates. The purpose of the ASI was to provide an authoritative summing up of the various research activities related to sonar technology. The exposition on each subject began with one or two tutorials prepared by invited lecturers, followed by research papers which provided indications of the state of development in that specific area. I have broadly classified the papers into three sections under the titles of I. Propagation and Noise, II. Signal Processing and III. Post Processing. The reader will find in Section I papers on low frequency acoustic sources and effects of the medium on underwater acoustic propagation. Problems such as coherence loss due to boundary interaction, wavefront distortion and multipath transmission were addressed. Besides the medium, corrupting noise sources also have a strong influence on the performance of a sonar system and several researchers described methods of modeling these sources.
Download or read book Rayleigh Wave Theory and Application written by Eric A. Ash and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is no respect for mere age in Science or Technology. Yet the cen tenary of the discovery, by the third Lord Rayleigh, that elastic waves can be guided by a surface, is memorable for the contradictions which it encompasses: Rayleigh's assessment of his classic 1885 paper as a rather minor mathematical development with a potential value only in seismology on the one hand; on the other the rediscovery of the subject in a totally that of electronic signal processing - which has led to its different fiel- explosive growth over the last twenty years. The new surface acoustic wave (SAW) devices have proved to be per electronic components. Today almost all television receivers con vasive tain one or more SAW filters, sophisticated radars depend on SAW signal processing, and SAW devices have been incorporated in ultra-high perfor mance opto-electronic systems. With the objective of surveying these developments and attempting to predict those that can be foreseen, as well as marking the centenary of Lord Rayleigh's discovery, The Rank Prize Funds' Committee for Opto Electronics organised a symposium in London, in July 1985. It was held in the Royal Institution, London, where Rayleigh himself once worked and often lectured. The present volume is the tangible outcome of the symposium, In which international experts survey.ed their various fields, and presented the most exciting recent developments.
Download or read book Constitutive Modelling in Geomechanics written by Alexander Puzrin and published by Springer Science & Business Media. This book was released on 2012-01-21 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to bridge the gap between the traditional Geomechanics and Numerical Geotechnical Modelling with applications in science and practice. Geomechanics is rarely taught within the rigorous context of Continuum Mechanics and Thermodynamics, while when it comes to Numerical Modelling, commercially available finite elements or finite differences software utilize constitutive relationships within the rigorous framework. As a result, young scientists and engineers have to learn the challenging subject of constitutive modelling from a program manual and often end up with using unrealistic models which violate the Laws of Thermodynamics. The book is introductory, by no means does it claim any completeness and state of the art in such a dynamically developing field as numerical and constitutive modelling of soils. The author gives basic understanding of conventional continuum mechanics approaches to constitutive modelling, which can serve as a foundation for exploring more advanced theories. A considerable effort has been invested here into the clarity and brevity of the presentation. A special feature of this book is in exploring thermomechanical consistency of all presented constitutive models in a simple and systematic manner.
Download or read book Seismic Diffraction written by Tijmen Jan Moser and published by SEG Books. This book was released on 2016-06-30 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of diffraction imaging to complement the seismic reflection method is rapidly gaining momentum in the oil and gas industry. As the industry moves toward exploiting smaller and more complex conventional reservoirs and extensive new unconventional resource plays, the application of the seismic diffraction method to image sub-wavelength features such as small-scale faults, fractures and stratigraphic pinchouts is expected to increase dramatically over the next few years. “Seismic Diffraction” covers seismic diffraction theory, modeling, observation, and imaging. Papers and discussion include an overview of seismic diffractions, including classic papers which introduced the potential of diffraction phenomena in seismic processing; papers on the forward modeling of seismic diffractions, with an emphasis on the theoretical principles; papers which describe techniques for diffraction mathematical modeling as well as laboratory experiments for the physical modeling of diffractions; key papers dealing with the observation of seismic diffractions, in near-surface-, reservoir-, as well as crustal studies; and key papers on diffraction imaging.
Download or read book Petroleum Related Rock Mechanics written by Erling Fjær and published by Elsevier. This book was released on 2008-01-04 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers and geologists in the petroleum industry will find Petroleum Related Rock Mechanics, 2e, a powerful resource in providing a basis of rock mechanical knowledge - a knowledge which can greatly assist in the understanding of field behavior, design of test programs and the design of field operations. Not only does this text give an introduction to applications of rock mechanics within the petroleum industry, it has a strong focus on basics, drilling, production and reservoir engineering. Assessment of rock mechanical parameters is covered in depth, as is acoustic wave propagation in rocks, with possible link to 4D seismics as well as log interpretation. - Learn the basic principles behind rock mechanics from leading academic and industry experts - Quick reference and guide for engineers and geologists working in the field - Keep informed and up to date on all the latest methods and fundamental concepts
Download or read book Computational Ocean Acoustics written by Finn B. Jensen and published by Springer Science & Business Media. This book was released on 2011-06-10 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: Senior level/graduate level text/reference presenting state-of-the- art numerical techniques to solve the wave equation in heterogeneous fluid-solid media. Numerical models have become standard research tools in acoustic laboratories, and thus computational acoustics is becoming an increasingly important branch of ocean acoustic science. The first edition of this successful book, written by the recognized leaders of the field, was the first to present a comprehensive and modern introduction to computational ocean acoustics accessible to students. This revision, with 100 additional pages, completely updates the material in the first edition and includes new models based on current research. It includes problems and solutions in every chapter, making the book more useful in teaching (the first edition had a separate solutions manual). The book is intended for graduate and advanced undergraduate students of acoustics, geology and geophysics, applied mathematics, ocean engineering or as a reference in computational methods courses, as well as professionals in these fields, particularly those working in government (especially Navy) and industry labs engaged in the development or use of propagating models.
Download or read book Seismic Inversion written by Gerard T. Schuster and published by SEG Books. This book was released on 2017-07-01 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the theory and practice of inverting seismic data for the subsurface rock properties of the earth. The primary application is for inverting reflection and/or transmission data from engineering or exploration surveys, but the methods described also can be used for earthquake studies. Seismic Inversion will be of benefit to scientists and advanced students in engineering, earth sciences, and physics. It is desirable that the reader has some familiarity with certain aspects of numerical computation, such as finite-difference solutions to partial differential equations, numerical linear algebra, and the basic physics of wave propagation. For those not familiar with the terminology and methods of seismic exploration, a brief introduction is provided. To truly understand the nuances of seismic inversion, we have to actively practice what we preach (or teach). Therefore, computational labs are provided for most of the chapters, and some field data labs are given as well.